Sunnydaze DECOR FSN-724 Arrow Motif 32.75 Inch Round Wood Burning Fire Pit Instruction Manual
- June 17, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR FSN-724 Arrow Motif 32.75 Inch Round Wood Burning Fire
Pit
Specifications:
- Product Name: Arrow Motif Steel Fire Pit with Grill
- Model Number: FSN-724
- Manufacturer: Sunnydaze Decor
- Warranty: 1 year
Product Usage Instructions
Step 1: Assembly
- Review all steps and understand the assembly before starting.
Step 2: Leg Installation
- Align one Leg (F) with the bottom of Fire Bowl (D).
- Loosely secure using two Washers (5) and two Nuts (4).
- Repeat the process to secure the remaining three legs.
Step 3: Ring Bracket and Safety Ring Installation
- Working one section at a time, secure one Ring Bracket (E) to a leg using two M6x12mm Bolts (1).
- Align the mounting holes of two Safety Rings (G) within the bracket.
- Repeat the process until all brackets and rings are loosely installed.
- After all safety rings are installed, align the mounting holes and secure the brackets to the rings using four M6x12mm Bolts (1).
- Tighten all hardware.
Step 4: Table Panel Installation
- Align four Table Panels (C) with brackets on the outside edge of the fire bowl.
- Use two M6x15mm Wing Bolts (2) to secure each panel.
- Insert Grate Post (B) into the built-in tube inside the fire bowl.
- Secure the grate post using one M8x20mm Wing Bolt (3).
Step 5: Wood Grate and Cooking Grate Installation
- Place Wood Grate (H) inside the fire bowl.
- Install Cooking Grate (A) onto the grate post.
- Secure the cooking grate using one M8x20mm Wing Bolt (3).
Care & Maintenance:
Safe Use: Only use fire pits on a flat,non-combustible surface such as
concrete, rock, or stone. Do not use this fire pit on a wood deck or any other
combustible surfaces like dry grass, leaves, mulch, etc. Never use in an area
with an overhead structure or near any unprotected combustible constructions
like vinyl or wood siding. Avoid using near or under overhanging trees and
shrubs.
FAQ:
Q: What should I do if I need replacement parts or products during the
warranty period?
A: Contact Sunnydaze Decor by phone at
833-982-1977, by email at
customerservice@sunnydazedecor.com,
or via the contact us page at https://tiny.cc/SunnydazeContact. Provide
proof of purchase with the date of purchase and photos of the merchandise
defect to request replacement parts or products.
Q: How do I register my warranty?
A: Register your warranty at https://tiny.cc/SunnydazeWarranty.
Purchase Date:
Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year
warranty period. Proof of purchase, with the date of purchase as well as
photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty If you have any questions,
comments or concerns, feel free to contact us by phone at
833-982-1977, by email:
customerservice@sunnydazedecor.com
, or via our contact us page at https://tiny.cc/SunnydazeContact
Review all assembly and care information before using this product.
Save this manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the finish.
Parts
HARDWARE TOOLS
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children and pets away during assembly
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
ASSEMBLY
Review all steps and understand assembly before beginning.
STEP 1
TIP: Wait until the safety ring is fully installed to tighten the nuts. This
will help ensure better mounting hole alignment in Step 2.
Align one Leg (F) with the bottom of Fire Bowl (D) and loosely secure using
two Washers (5) and two Nuts (4).
Repeat to secure the remaining three legs.
STEP 2
Working one section at a time, secure one Ring Bracket (E) to a leg using two
M6x12mm Bolts (1). Then, align the mounting holes of two Safety Rings (G)
within the bracket. Repeat until all brackets and rings are loosely installed.
After all safety rings are installed, align the mounting holes and secure the
brackets to the rings using four M6x12mm Bolts (1). Tighten all hardware.
STEP 3
Align four Table Panels (C) with brackets on the outside edge of the fire
bowl.
Use two M6x15mm Wing Bolts (2) to secure each panel.
STEP 4
Insert Grate Post (B) into the built-in tube inside the fire bowl and secure
using one M8x20mm Wing Bolt (3).
STEP 5
Place Wood Grate (H) inside the fire bowl.
STEP 6
Install Cooking Grate (A) onto the grate post and secure using one M8x20mm
Wing Bolt (3).
CARE & MAINTENANCE
SAFE USE: Only use fire pits on a flat, non-combustible surface such as
concrete, rock, or stone. Do not use this fire pit on a wood deck or any other
combustible surfaces like dry grass, leaves, mulch, etc. Never use in an area
with an overhead structure or near any unprotected combustible constructions
like vinyl or wood siding. Avoid using near or under overhanging trees and
shrubs.
The fire pit will become extremely hot while in use. Always use the
poker/lifting tool and heat-resistant gloves when maintaining a fire.
NO ACCELERANTS, NO PLASTICS: Never use an accelerant, i.e. gasoline or
kerosene, to start a fire; doing so is dangerous and can damage your fire pit.
Never use any plastic materials in or near a fire pit. The emissions from
burning plastic are toxic. Additionally, plastic residue is very difficult to
remove.
EXTINGUISH: Let fire die down gradually and go out on its own. DO NOT use water to put out a fire as the sudden drop in temperature may cause serious injury and/or damage the metal.
EXPOSURE & MAINTENANCE: Long-term exposure to high-intensity heat can cause the mesh screens to warp and the high-temperature paint to flake or burn off the steel. If the steel is exposed to moisture, it will rust. As with any outdoor steel product, periodic maintenance is required to maintain integrity and appearance. Remove rust and refinish with a suitable high-temperature paint; carefully follow the paint manufacturer instructions and ensure the paint is completely dry before using the unit again.
CLEANING: Remove ashes and debris before every use. Ensure the fire pit and ashes are completely cool before cleaning. Ashes can remain hot long after a fire dies down. If you feel heat when your hand is close to the metal or the ashes, the unit is too hot to clean.
COVER AND STORE: Ensure the unit is completely cool before covering. Always clean the unit before covering it. Do not allow the fire pit to be exposed to water. Store this unit in a dry location to protect it from environmental elements. The manufacturer is not liable for damage resulting from general use and/or environmental conditions.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, TOUCH-UP PAINT, OR CLEANING PRODUCTS.
SAFETY STATEMENTS & WARNINGS
- For outdoor use only. Never use this product in an enclosed area.
- Always follow local laws and regulations when using wood-burning fire pits.
- Exercise the same care and precautions as you would with an open fire.
- Always supervise children and pets when they are in proximity of this product, whether it is in use or not in use.
- Never use any fire pit during dry or windy conditions.
- Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
- Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
- Only use this fire pit on a level, non-combustible surface.
- Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
- Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or product damage.
- Do not overfill or use this unit or use it to burn leaves or trash.
- This unit becomes very hot when in use. Ensure the unit is completely cool before cleaning or moving.
- Never leave unit unattended while hot or in use.
- Extinguish the fire properly before leaving it unattended. If necessary, use a fire extinguisher or sand to smother the fire. NEVER use water to extinguish hot fires or embers as doing so may cause serious injury and/or permanently damage the product.
- Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
- Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
- DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
Contact the local authorities regarding possible burn restrictions before using this product.
Any modification to the product or failure to follow recommended care will void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping,please contact our customer service team through one of the methods
mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>