CP PLUS V33GN ezykam Plus Intelligent Home PT Camera User Guide

CP PLUS V33GN ezykam Plus Intelligent Home PT Camera

Product Information

• Specifications
  • Model: CPPlus ezykam+
  • Camera Type: 4G Camera
  • Onvif Support: Yes
  • Power Source: Power Adapter
  • Waterproof: Yes

Product Usage Instructions

• Add Camera
  • To add the camera to your network, follow these steps:
  • Power on the camera.
  • Ensure that your internet is connected to the camera.
• Status Light Prompt of 4G Camera Tail Line
  • The status light on the camera tail line indicates the network status:
  • Blinking every 0.5 seconds: Searching for the network.
  • Always on: The network is normal.
• Onvif Support
  • This camera supports Onvif, which allows it to be compatible with other Onvif devices.
• Frequently Asked Questions (FAQ)
  • Can I share the camera with family and friends?
  • Yes, you can share your cameras with family and friends who will have access to view the camera.
  • Why does the camera appear offline or unreachable?
  • The camera may appear offline or unreachable due to the following reasons:
  • The internet connection is not stable.
  • The camera is powered off.
  • The camera is out of range.
  • How many cameras can I control?
  • You can control an unlimited number of cameras in multiple locations.
  • However, please note that your router may have a limit on how many cameras can be connected to it.
• Quick Operation Guide
  • Thank you for choosing CPPlus ezykam+. Follow the steps below to get started:
• Get Ready
  • Make sure you have the following:
  • A smartphone with iOS 11.0 or higher or Android 8.0 or higher.
  • The ezykam+ app downloaded from the App Store or Google Play.
  • An account registered on the ezykam+ app.
  • The Ezykam Camera and its accessories (Power Adapter, Waterproof Cap).
  • Download the ezykam+ app
  • Go to the App Store or Google Play and search for “ezykam+”. Download and install the app on your smartphone.
  • Register an account
  • Open the ezykam+ app and follow the on-screen instructions to register an account.
  • Plug in the Ezykam Camera
  • Plug in the Ezykam Camera using the provided Power Adapter.
• Contact Information
  • If you need further assistance, you can reach us via email at ezycare@cpplusworld.com.
  • Please read the instructions carefully before using the product.

Thank you for choosing CP PLUS ezykam+. Get Started using your new devices by downloading the ezykam+ app,  one convenient app that manages everything straight from your smartphone. Easily connect to 4G SIM Network and control multiple devices from the touch of your fingertips.

What’s in the Box

Get Ready

Make sure your mobile device is running iOS® 9.0 or higher or Android’™ 8.0 or higher.

1. Download the ezykam+ app from the App Store or Google Play.
2. Register an account on your ezykam+ app.
   • STEP 1.
   • Select the country.
   • Enter the email address.
   • STEP 2.
   • Enter the verification code and create a password.
3. Plugin
   • How do I reset my camera?
   • Use the reset pin to press the Reset Button for several seconds until hear the reset beep sound. The camera will be rebooted.
   • Optional: Insert Micro SD card
4. Add Camera
   • Open the ezykam+ app, click “+” on the top right corner of the “HOME” page, then select “Specific model to add”.
   • Power on the camera. Kindly make sure the internet is connected to the camera.
   • Align the QR code or barcode in the frame and scan it.
5. Add Camera
   • APP will scan the Device in the network & after the device is searched it will register on the cloud. After that device will added successfully.
6. Status light prompt of 4G camera tail line 4G mode:
7. Slow flashing:

  * The 4G module is abnormal or the SIM card is abnormal, and flashes once every 2s.
2.  **Fast flashing:**
  * No dialing number (no flow or bad signal), flashing once every 0.5s.
3.  **Always on:**
  * The network is normal.

7. Onvif Support
   • The camera can be added to any Onvif Compliant device using the Onvit protocol. Camera can be added with port-8888 in any NVR/DVR.

System Requirements

• Smartphone running iOS® 9.0 or higher or Android™ 8.0 or higher
• 4G SIM Network with an Internet connection.

Technical Specifications

• Camera: up to 3MP (2304×1296) at 15 frames/sec. H.265 encoding
• Audio: Internal Speaker and Microphone
• Storage: supports up to 256 GB Micro SD card (not included)

Frequently Asked Questions

1. Can I share the camera with family and friends?
   • Yes, you can share your cameras with family and friends who will have access to view the camera.
2. Which SIM card is supported?
   • All 4G/3G SIM cards are supported by the device.
3. Does the camera appear offline or unreachable?
   • Make sure you inserted the SIM in the correct position during the setup. Check whether there are any
   • Internet connection problem in SIM. If the SIM signal is too weak, Keep the camera in a good network area.
4. Cannot connect to your SIM network?
   • Make sure there is an active Internet plan on the SIM card which is inserted on the camera.
5. How many cameras can I control?
   • CP Plus app can control an unlimited number of cameras in an unlimited amount of locations. Your router may have a limit on how many cameras can be connected to one router.

Thank you for choosing CPPlus ezykam+

1. For further assistance, you can reach us via ezycare@cpplusworld.com.
2. Please read the instructions carefully before using the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>