Avanti RM1700W-1 Refrigerator Freezer Instruction Manual
- June 17, 2024
- Avanti
Table of Contents
- Avanti RM1700W-1 Refrigerator Freezer
- Product Information
- Product Usage Instructions
- REFRIGERATOR SAFETY
- IMPORTANT SAFEGUARDS
- PARTS & FEATURES
- INSTALLATION INSTRUCTIONS
- OPERATING YOUR UNIT
- CARE AND MAINTENANCE
- PROBLEMS WITH YOUR REFRIGERATOR
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Avanti RM1700W-1 Refrigerator Freezer
Product Information
Specifications
- Model Numbers: RM1700W-1, RM1701B-1, RM1702SS-1, BCA1800W-2, BCA1801B-2, BCA1802SS-2
- Product Type: Refrigerator
- Manufacturer: Avanti Products, A Division of the Mackle Co., Inc.
- Address: P.O. Box 520604 – Miami, Florida 33152
- Website: www.avantiproducts.com
Refrigerator Safety
Your safety and the safety of others are very important. Please read and
obey all safety messages provided in this manual. The safety messages will be
indicated by the Safety Alert Symbol and the words DANGER, WARNING, or
CAUTION.
- DANGER: Failure to heed this safety statement may result in severe personal injury or death.
- WARNING: Failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
- CAUTION: Failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.
Important Safeguides
Before using the refrigerator, it must be properly positioned and installed
as described in the manual. To reduce the risk of fire, electrical shock, or
injury, follow the basic precautions recommended in this manual. For any
servicing, contact a qualified technician.
Help Us Help You
Read this guide carefully to understand how to operate and maintain your
new unit properly. Write down the model and serial numbers found on a plate
located on the rear outside wall of the unit. Keep this guide handy for
reference and in case you need assistance. If you have any questions or need
further assistance, please call Avanti Customer Service at
800-220-5570. Keep proof of the
original purchase date with this guide to establish the warranty period.
Caution
This unit is not designed for the storage of medicine or other medical
products.
If You Need Service
If you are not happy with the service you receive, follow these steps for
further assistance:
- Contact the people who serviced your unit and explain why you are not pleased.
- In most cases, this will solve the problem.
Product Usage Instructions
Positioning and Installation
Before using the refrigerator, ensure it is properly positioned and installed
according to the instructions provided in the manual.
Basic Precautions
Follow these basic precautions to reduce the risk of fire, electrical shock,
or injury while using the refrigerator:
- Keep the refrigerator away from heat sources and direct sunlight.
- Ensure there is proper ventilation around the refrigerator.
- Do not block the air vents or grille.
- Do not use the refrigerator outdoors.
- Do not operate the refrigerator with wet hands.
- Do not use the refrigerator if the power cord or plug is damaged.
- Do not insert fingers or objects into the ventilation openings.
- Do not store flammable materials or substances inside the refrigerator.
- Do not overload the refrigerator with excessive weight.
Troubleshooting Guide
If you encounter minor operating problems, consult the Troubleshooting Guide
provided in the manual before calling for service. The guide lists common
causes of issues that you may be able to correct yourself, saving time and
money.
Serial Number and Model Number
Write down the serial number and model number of your unit. These numbers are
located on a plate on the rear outside wall of the refrigerator. Use these
numbers in any correspondence or service calls concerning your unit.
Damaged Unit
If you received a damaged unit, immediately contact the dealer or builder who
sold you the unit for further assistance.
Not for Medical Product Storage
Caution: This refrigerator is not designed for the storage of medicine or
other medical products. Please refrain from using it for such purposes.
FAQ (Frequently Asked Questions)
-
Q: Can I use this refrigerator to store medicine?
A: No, this refrigerator is not designed for the storage of medicine or other medical products. Please refrain from using it for such purposes. -
Q: Where can I find the model and serial numbers of the unit?
A: The model and serial numbers are located on a plate on the rear outside wall of the refrigerator. -
Q: What should I do if I encounter operating problems with the refrigerator?
A: Before calling for service, consult the Troubleshooting Guide provided in the manual. It lists common causes of minor operating problems that you may be able to correct yourself.
REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words ” DANGER”, “WARNING” or “CAUTION”.
- Danger means that failure to heed this safety statement may result in severe personal injury or death.
- Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
- Caution means that failure to heed this safety statement may result in minor or moderate personal injury, property or equipment damage.
All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the refrigerator is used, it must be properly positioned and installed as described in this manual so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the refrigerator, follow basic precaution, including the following:
DANGER
- Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
- It is recommended that a separate circuit, serving only your refrigerator be provided. Use receptacles that cannot be turned off by a switch or pull chain.
- Never clean refrigerator parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
- Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
- Do not connect or disconnect the electric plug when your hands are wet.
- Unplug the refrigerator or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
- Do not attempt to repair or replace any part of your refrigerator unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
WARNING
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
- Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury.
- To ensure proper ventilation for your refrigerator, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.
- The refrigerator should not be located next to ovens, grills or other sources of high heat.
- The refrigerator must be installed with all electrical, water and drain connections by state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded by the National Electrical Code and local codes and ordinances is required.
- Do not kink or pinch the power supply cord of the refrigerator.
- The fuse (or circuit breaker) size should be 15 amperes.
- The refrigerator needs to be leveled to work properly. You may need to make several adjustments to level it.
- All installation must be by local plumbing code requirements.
- Make certain that the pipes are not pinched or kinked or damaged during installations.
- Check for leaks after connection.
- Never allow children to operate, play with or crawl inside the refrigerator.
- Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.
- Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.
- Do not use this apparatus for other than its intended purpose.
HELP US HELP YOU…
Read this guide carefully.
It is intended to help you operate and maintain your new unit properly. Keep
it handy to answer your questions. If you don’t understand something or you
need more assistance, please call:
Avanti Customer Service 800-220-5570
Keep proof of original purchase date (such as your sales slip) with this guide
to establish the warranty period.
CAUTION: THIS UNIT IS NOT DESIGNED FOR THE STORAGE OF MEDICINE OR OTHER
MEDICAL PRODUCTS.
Write down the model and serial numbers.
You’ll find them on a plate located on the rear outside wall of the unit.
Please write these numbers here:
- Date of Purchase: __
- Model Number: __
- Serial Number: __
Use these numbers in any correspondence or service calls concerning your unit. If you received a damaged unit, immediately contact the dealer (or builder) that sold you the unit. Save time and money. Before you call for service, check the Troubleshooting Guide. It lists causes of minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We’re proud of our service and want you to be pleased. If for some reason you
are not happy with the service you receive, here are some steps to follow for
further assistance.
FIRST, contact the people who serviced your unit. Explain why you are not
pleased. In most cases, this will solve the problem. NEXT, if you are still
not pleased, write all the details, including your telephone number, and send
it to:
Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 USA
PARTS & FEATURES
- Temperature Control Knob
- Ice Cube Tray (Only on models RM1700W / 1701B / 1702PS)
- Drip Tray (Only on models RM1700W / 1701B / 1702PS)
- Removable Shelf
- Leveling legs
- Chiller Compartment (Only on models RM1700W / 1701B / 1702PS)
- Small Rack
- Large Rack
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock, or injury when
using your appliance, follow these basic precautions:
- Read all instructions before using the refrigerator.
- DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous. . . even if they will “just sit in the garage a few days.”
- Before you throw away your old refrigerator: Take off the doors. Leave the shelves in place so that children may not easily climb inside.
- Never allow children to operate, play with, or crawl inside the refrigerator.
- Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.
- Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
Before Using Your Unit
- Remove the exterior and interior packing.
- Check to be sure you have all of the following parts:
- 1 Water Drip Tray (Only on models RM1700W / 1701B / 1702PS)
- 1 Ice Cube Tray (Only on models RM1700W / 1701B / 1702PS)
- 1 Shelf
- 1 Instruction Manual
- Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
Installing Your Unit
- This appliance is designed to be free standing only, and should not be recessed or built-in.
- Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit.
- Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.
- Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
- Avoid locating the unit in moist areas.
- Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
- After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.
Electrical Connection
Warning: Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, have it replaced by an
authorized Avanti Products service center.
This unit should be properly grounded for your safety. The power cord of this unit is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.
This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three-prong ground. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.
The unit should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the unit, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this unit. However, if
you must use an extension cord it is absolutely necessary that it be a UL/CUL-
Listed, 3-wire grounding type appliance extension cord having a grounding type
plug and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
Reversing the Door Swing of Your Appliance
This appliance has the capability of the door opening from either the left or
right side. The unit is delivered to you with the door opening from the left
side. Should you desire to reverse the opening direction, please call customer
service for reversal instructions.
OPERATING YOUR UNIT
Setting the Temperature Control
- Your unit has only one control for regulating the temperature in the compartment. The temperature control is located on the upper right hand side of the compartment.
- The first time you turn the unit on, set the temperature control to “6”.
- The range of the temperature control is from position “OFF” to “6”. After 24 to 48 hours, adjust the temperature control to the setting that best suites your needs. The setting of “4” should be appropriate for home or office use.
- To turn the appliance off, turn the temperature control to ”OFF”.
NOTE:
- Turning the temperature control to “OFF” position stops the cooling cycle but does not shut off the power to the unit.
- If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.
Using Your Ice Cube Tray (Only on models RM1700W / 1701B / 1702PS)
- Recommended thermostat setting for ice making is position “6”.
- Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for freezing and place the tray on the bottom of the chiller compartment to freeze properly.
- Dry the tray, otherwise it may stick to the bottom of the chiller.
- The best method to get ice cubes out of the tray is to hold the tray under cold tap water for a second.
- To eject the ice cubes from the tray, place over the ice bucket and twist slightly
The Chiller Compartment (Only on Models RM1700W / 1701B / 1702PS)
- This compartment is designed for production of ice cubes and short-term storage (3-4 days at most) of some commercially frozen foods.
- The temperature in this compartment does not get cold enough to freeze food safely for long periods of time and works best when the food is already frozen.
- Be design, this chiller compartment is not a true freezer, and may not keep ice cream frozen, or freeze items.
- A colder setting may be used for these items, but other items in the refrigerator may also be affected.
- The chiller door is susceptible to breaking due to excessive ice build up. This part is not covered under your warranty. Be sure to defrost when the ice reaches 1/4 inch thick.
CARE AND MAINTENANCE
Defrosting Your Unit (Only on models RM1700W / 1701B / 1702PS)
- Defrost the unit when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick. Set the thermostat dial to “OFF” position.
- Remove frozen or perishable foods from the chiller compartment and place it in a cooler to protect the food.
- During the defrost cycle, the ice melts into the water drip tray.
- To remove the water, either remove the water drip tray and/or place a collection container under the tray. Use a sponge or towel to pick up the melting ice off the unit floor.
- Dry the water collection tray and place back under the chiller compartment. Defrosting usually takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost quickly remove all foods from the unit and leave the door open. Never use a knife or other metal instrument to scrape ice/frost from the evaporator.
CAUTION: Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling system and will void the warranty. We recommend using a plastic scraper.
Cleaning Your Unit
- Turn the temperature control to “OFF”, unplug the unit, and remove the food, shelf, and tray.
- Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.
- Wash the shelf and tray with a mild detergent solution.
- The outside of the unit should be cleaned with mild detergent and warm water.
- Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any electrical parts.
- Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
CAUTION: Failure to unplug the unit could result in electrical shock or personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your unit if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need
to take the proper steps to protect your food.
Vacation Time
- Short vacations: Leave the unit operating during vacations of less than three weeks.
- Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary.
Moving Your Unit
- Remove all the food.
- Securely tape down all loose items inside your unit.
- Turn the leveling legs up to the base to avoid damage.
- Tape the door shut.
- Be sure the unit stays secure in the upright position during transportation. Also protect the outside of unit with a blanket, or similar item.
Energy Saving Tips
- The unit should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight.
- Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the compressor to run longer.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on frost build-up inside the unit.
- Unit storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the unit less efficient.
- Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
PROBLEMS WITH YOUR REFRIGERATOR
You can solve many common unit problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM | POSSIBLE CAUSE |
---|---|
Unit does not operate. | Not plugged in. |
The circuit breaker tripped or a blown fuse. The unit temperature control is set at “OFF” position.
Turns on and off frequently.| The room temperature is hotter than normal. A large amount of food has been added to the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal properly.
The unit does not have the correct clearances.
Vibrations.| Check to assure that the unit is level.
The unit seems to make too much noise.| The rattling noise may come from the
flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your unit.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The unit is not level.
The door will not close properly.| The unit is not level.
The door was reversed and not properly installed. The gasket is dirty or bent.
The shelves, bins, or baskets are out of position.
WARRANTY
WHAT IS COVERED LIMITED ONE-YEAR WARRANTY For one year from the date of purchase by the original owner, Avanti Products will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Avanti Products will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Avanti Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY
For the second through the fifth year from date of original purchase, Avanti
Products will provide a replacement compressor free of charge due to a
failure. You are responsible for the service labor and freight charges. In
rental or commercial use, the limited compressor warranty is one year and nine
months. Cost to move the unit to the servicers’ shop and back to the user’s
home, as may be required, are the user’s responsibility.
WHAT IS NOT COVERED
- Content losses of food due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Evaporator doors, door springs, and/or frames.
- Inner door panels, door shelves, door rails, and/or door supports.
- Chest refrigerator lid liners.
- Vegetable crispers.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Shipping and handling costs associated with the replacement of the unit.
- Repairs performed by unauthorized servicers.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the State of Alaska.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
REGISTRATION INFORMATION
Thank you for purchasing this fine Avanti product. Please fill out this form
and return it within 100 days of purchase and receive these important benefits
to the following address:
Avanti Products, A Division of The Mackle Co., Inc.
P.O.Box 520604 – Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product
on file to help you refer to this information in the event of an insurance
claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to
best meet your future needs.
Avanti Products, A Division of the Mackle Co., Inc.
P.O. Box 520604 – Miami, Florida 33152
www.avantiproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>