behringer EPQ900 Professional 900 300 and 460 Watt Light Weight Stereo 4 Channel Power Amplifier User Manual

behringer EPQ900 Professional 900 300 and 460 Watt Light Weight Stereo 4

Channel Power Amplifier

EUROPOWER EPQ900/EPQ450/EPQ304
Professional 900, 300 and 460-Watt Light Weight Stereo/4-Channel Power Amplifier with ATR (Accelerated Transient Response) Technology

Important Safety Instructions

• Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock.

• Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.

• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

• Caution
  To reduce the risk of electric shock, do not remove the top cover (or the rear section).

• No user-serviceable parts inside. Refer servicing to qualified personnel.

• Caution
  To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install per the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS THAT MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM THE ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY

TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD.

ALL RIGHTS RESERVED.

© 2013 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at www.music-group.com/warranty.

Hook-up

EUROPOWER EPQ900/EPQ450/EPQ304 Hook-up

Controls

EUROPOWER EPQ900/EPQ450/EPQ304 Controls

Getting started

EUROPOWER EPQ900/EPQ450/EPQ304 Getting started

1. Make sure the amplifier and your sound source are turned OFF.
2. Set all GAIN CONTROLS to their farthest counter-clockwise position.
3. Turn on your sound source (mixer, CD player, computer).
4. Press the POWER BUTTON to switch on the amplifier.
5. Set the output levels on your sound source.
6. Adjust the GAIN CONTROLS to set the input levels.
7. If the LIMIT LEDs light up continuously, lower the GAIN CONTROLS until the LIMIT LEDs only light occasionally. This level should give you the best balance between signal strength and amp headroom.

Bi-amping

EUROPOWER EPQ900/EPQ450/EPQ304 Bi-amping
Bi-amping splits a mono signal into upper and lower frequency bands, and then assigns each frequency band to separate speaker cabinets. A subwoofer typically takes the low frequency range. By splitting the signal this way, the speakers work more efficiently, and you can achieve a cleaner overall sound.

Specifications

Output Power

Peak

channels bridged
8 Ω / 1 kHz| 900 W| 460 W| 150 W

RMS

channels bridged
8 Ω / 1 kHz @ 1% THD| 580 W| 310 W| 130 W

System

Controls

Front| Power switch

Gain controls (channels 1 and 2)

| Power switch

Gain controls (channels 1 and 2)

| Power switch

Gain controls (channels 1, 2, 3, 4)

---|---|---|---
Rear| Mode switch (Mono, Stereo, Bridge)

Indicators

Circuit

Inputs| 2 x XLR / ¼” TRS combo jacks| 2 x XLR / ¼” TRS combo jacks| 4 x XLR / ¼” TRS combo jacks
---|---|---|---
Input sensitivity| 2.5 dBu| 2 dBu| 0 dBu
Input impedance| 10 kΩ unbalanced, 20 kΩ balanced
Outputs| 2 x locking-style professional speaker connectors| 2 x locking-style professional speaker connectors| 4 x locking-style professional speaker connectors
Output circuit type| Class H| Class AB| Class D
Distortion| < 0.3%
Frequency response| 20 Hz – 20 kHz, +0 / -1 dB
Voltage gain| 30 dB| 28 dB| 28 dB
Damping factor| > 350 @ 8 Ω| > 200 @ 8 Ω| > 80 @ 8 Ω
Signal-to-noise| 104 dB| 102 dB| 100 dB

Circuit Protection

protection
Load protection| On/off muting, DC fault power supply shut down

Power Supply/Voltage (Fuses)

USA / Canada| 120 V~, 60 Hz (T 10 A H 250 V)| 120 V~, 60 Hz (T 6.3 A H 250 V)| 120 V~, 60 Hz (T 6.3 A H 250 V)
---|---|---|---
UK / Australia| 240 V~, 50 Hz (T 6.3 A H 250 V)| 240 V~, 50 Hz (T 3.15 A H 250 V)| 240 V~, 50 Hz (T 3.15 A H 250 V)
Europe| 230 V~, 50 Hz (T 6.3 A H 250 V)| 230 V~, 50 Hz (T 3.15 A H 250 V)| 230 V~, 50 Hz (T 3.15 A H 250 V)
China| 220 V~, 50 Hz (T 6.3 A H 250 V)| 220 V~, 50 Hz (T 3.15 A H 250 V)| 220 V~, 50 Hz (T 3.15 A H 250 V)
Japan| 100 V~, 50/60 Hz (T 10 A H 250 V)| 100 V~, 50/60 Hz (T 6.3 A H 250 V)| 100 V~, 50/60 Hz (T 6.3 A H 250 V)
Power consumption| 1050 W| 530 W| 380 W
Mains connector| Standard IEC receptacle

Dimensions/Weight

Dimensions (H x W x D)| appr. 1.9 x 19.0 x 10.4″ / 49 x 482 x 265 mm|  |
---|---|---|---
Weight| appr. 10.8 Ibs / 4.9 kg| appr. 10.4 Ibs / 4.7 kg| appr. 8.8 lbs / 4 kg

Important information

1. Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting behringer. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Fulfiller for your country listed under “Support” at behringer. com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer. com. Alternatively, please submit an online warranty claim at behringer. com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

BEHRINGER EUROPOWER EPQ900/EPQ450/EPQ304

• Responsible Party Name: MUSIC Group Services US Inc.
• Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA
• Phone/Fax No.:
  • Phone: +1 425 672 0816
  • Fax: +1 425 673 7647

EUROPOWER EPQ900/EPQ450/EPQ304
complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user’s authority to use the equipment.

behringer.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>