behringer DR115DSP Active 1,400 1,200 1,000 Watt 15 Inch 12 Inch 10 Inch PA Speaker System User Manual

behringer DR115DSP Active 1,400 1,200 1,000 Watt 15 Inch 12 Inch 10 Inch

PA Speaker System

Important Safety Instructions

• Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock.

• Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.

• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

• Caution
  To reduce the risk of electric shock, do not remove the top cover (or the rear section).

• No user-serviceable parts inside. Refer servicing to qualified personnel.

• Caution
  To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install per the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS THAT MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM THE ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY

TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD.

ALL RIGHTS RESERVED.

© 2013 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at www.music-group.com/warranty.

Zhongshan Eurotec Electronics Limited
No. 10 Wanmei Road, South China Modern Chinese Medicine Park, Nanlang Town, 528451, Zhongshan City, Guangdong Province, China.

Overview Description

1. DSP display – Backlit display for DSP functions.
2. AUX IN – Connect a media player via 1/8″ TRS cable. Stereo signals are summed to mono. Control the input gain with the CH1 VOLUME knob.
3. BLUETOOTH LED – The blue LED will flash when Bluetooth is on and searching for a connection. When a successful connection is established, the LED will light solid.
4. BLUETOOTH BUTTON – Press to turn the Bluetooth function on and off. Use the MASTER control to adjust the volume.
5. OUTPUT – Sends the combined signals from CH1 and CH2 INPUTS out to another device via XLR male connector.
6. VENTS
7. MASTER – Rotate to control the overall volume level. Push the knob to access DSP functions, which are explained in the following chapter.
8. CH1 VOLUME – Rotate to adjust the gain for INPUT 1 and AUX IN. The knob should generally be set above the midway point for microphone signals or turned down for line-level signals.
9. CH2 VOLUME – Rotate to adjust the gain for INPUT 2. The knob should generally be set above the midway point for microphone signals or turned down for line-level signals.
10. CH1 INPUT – Connect audio sources using balanced XLR or ¼” cables.
11. CH2 INPUT – Connect audio sources using balanced XLR or ¼” cables.
12. POWER INPUT – Connect a standard IEC power cable. To replace a blown fuse, carefully remove the fuse holder with a small screwdriver, then replace the defective fuse with a new one of the same type. Push the fuse holder back into the slot until it snaps.
13. POWER SWITCH – After all audio connections have been made, flip the switch to the ON position to turn the speaker on. (DR115DSP only)
14. AUTO STAND-BY BUTTON – Press to activate the automatic standby function. When activated, the speaker will automatically turn off after 60 minutes without an input signal present. When the unit receives a signal again, the power will return automatically. (DR112DSP/DR110DSP only)
15. AUTO STAND-BY LED – The red LED will light when the automatic standby function is activated.
16. POWER BUTTON – After all audio connections have been made, press the button to turn the speaker on. (DR112DSP/DR110DSP only)
17. FAN VENT

DSP Functions

• Sound Programs
  Press the MASTER knob twice to enter the speaker’s Sound Programs menu. ‘MUSIC’ will appear on the display. Press the MASTER knob again to select this program, or turn the MASTER knob to scroll through the other options – ‘DJ’, ‘LIVE’, ‘SPEECH’. Press the MASTER knob to confirm your selection.

• 3-band EQ
  Press the MASTER knob once and turn the MASTER knob to scroll through the 3-Band EQ menu: ‘HIGH EQ’ (treble), ‘MID EQ’ (mid-range), ‘LOW EQ’ (bass). Press the MASTER knob again to enter this frequency menu and turn the MASTER knob clockwise to boost the frequency up to 12 dB, or turn counterclockwise to reduce by up to 12 dB. Press the MASTER knob to confirm your settings.

• High Pass Filter
  Press the MASTER knob once and turn the MASTER knob until ‘SUB’ appears in the display. Press the MASTER knob again to enter the speaker’s High Pass Filter (low cut) menu. Turn the MASTER knob to select between OFF 80, 100, 120 or 150 Hz, and press the MASTER knob again to confirm the selection. Audio below the selected frequency will be attenuated.

• Delay
  Press the MASTER knob once and turn the MASTER knob until DELAY appears, then press the MASTER knob again to exit this function. This function causes the signal to be delayed a small amount of time to allow the music to be played in time with speakers located further away (e.g. main speakers on stage plus additional speakers in a balcony).

• LED Mode
  Press the MASTER knob once and turn the MASTER knob until LED MODE appears, then press the MASTER knob to edit this function. Select ‘ON’ to always show a lit LED on the front panel while the speaker is powered on, or ‘OFF’ to turn the LED off. Select ‘LIMIT’ to allow the LED to indicate when either the HF or LF limiter has engaged.

Specifications

Controls

• Hardware Rotary push-encoder, input gain controls

Loudspeaker/System Data

Woofer| 1 x 15″ (381 mm) LF driver| 1 x 12″ (305 mm) LF driver| 1 x 10″ (254 mm) LF driver
---|---|---|---
Tweeter| 1 x 1.75″ (44.4 mm)

HF compression driver

| 1 x 1.35″ (34.4 mm) HF compression driver
Frequency response| 45 Hz – 19 kHz (±3 dB)| 50 Hz – 19 kHz (±3 dB)| 55 Hz – 19 kHz (±3 dB)
Nominal dispersion| 90° H x 60° V
Maximum SPL| 136 dB| 134 dB| 132 dB
Crossover| 2-way, active
Limiter| Independent HF, LF

Audio Connections

Digital Signal Processor (DSP)

Bluetooth

250 V)
UK / Australia / Europe / Korea / China| 230 V~, 50 Hz (T 3.15 AL 250 V)| 230 V~, 50 Hz (T 2 AL 250 V)
Power consumption @ 1/8 max power| 105 W| 75 W
Mains connection| Standard IEC receptacle

Dimension/Weight

Dimensions (H x W x D)| 687 x 422 x 390 mm

(27.0 x 16.6 x 15.3″)

| 602 x 359 x 359 mm

(23.7 x 14.1 x 14.1″)

| 521 x 302 x 312 mm

(20.5 x 11.9 x 12.3″)

---|---|---|---
Weight| UL: 21.6 kg (47.6 lbs)

EU: 21.4 kg (47.1 lbs)

| UL: 17.2 kg (37.9 lbs)

EU: 17.0 kg (37.4 lbs)

| UL: 13.3 kg (29.3 lbs)

EU: 13.1 kg (28.9 lbs)

• Independent of limiters and driver protection circuits.
• The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by MUSIC Tribe is under license.

Important information

1. Register online. Please register your new MusicTribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction. Should your MusicTribe Authorized Reseller not be located in your vicinity, you may contact the MusicTribe Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer DR115DSP/DR112DSP/DR110DSP

• Responsible Party Name: Music Tribe Commercial NV Inc.
• Address: 5270 Procyon Street Las Vegas, NV 89118 USA
• Phone Number: +1 702 800 8290
• FCC ID: QWHDSP

DR115DSP/DR112DSP/DR110DSP
complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement:

• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>