behringer BEQ700 Ultimate 7 Band Graphic Equalizer User Manual
- June 17, 2024
- Behringer
Table of Contents
behringer BEQ700 Ultimate 7 Band Graphic Equalizer
Thank you for showing your confidence in us by purchasing the BEHRINGER BASS GRAPHIC EQUALIZER BEQ700. This ultimate effects pedal is specifically designed to match the frequency range of bass guitars. It allows 7-band sound shaping and feedback elimination from 50 Hz to 10 kHz. It has a powerful 15 dB boost/cut per band, ideally suited even for 5-string and 6-string bass guitars.
Controls
- The 7-band EQ faders allow boosting/cutting single frequency ranges from 50 Hz to 10 kHz at ±15 dB.
- The LEVEL fader adjusts the output level. It can be used to achieve effective volume “boost” or “cut.”
- This LED illuminates when the EQ is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the EQ.
- Use this ¼” TS IN connector to plug in the instrument cable.
- The ¼” TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
- The BEQ700 has no on/off switch. As soon as you insert the jack into the in connector, the BEQ700 begins running. When not using the BEQ700, remove the jack from the in connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service the product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when the power supply cord or plug is damaged.
Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.
Specifications
In
- Connector 1/4″ TS
- Impedance 500 kΩ
Out
- Connector 1/4″ TS
- Impedance 1 kΩ
Power Supply
9 V?, 100 mA regulated
BEHRINGER PSU-SB
- PSU-SB-CN BEHRINGER 220 VAC adaptor China
- PSU-SB-EU BEHRINGER 230 VAC adaptor Europe
- PSU-SB-JP BEHRINGER 100 VAC adaptor Japan
- PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia
- PSU-SB-UK BEHRINGER 240 VAC adaptor UK
- PSU-SB-UL BEHRINGER 115 VAC adaptor USA
- Power connector 2 mm DC jack, negative centre
- Battery 9 V type 6LR61
- Power consumption 30 mA
Physical/Weight
- Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
- (H x W x D) approx. 54 x 70 x 123 mm
- Weight approx. 0.73 lbs/0.33 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
MUSIC Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.