BOSMA AccessCam 1080P Pan Tilt WIFI Camera User Manual

BOSMA AccessCam 1080P Pan Tilt WIFI Camera

Bosma AccessCam
Our team has developed the Bosma line of connected devices to bring the Internet of Things into your home. The Bosma AccessCam is designed to provide you with leading technology to monitor your property and loved ones. This step-by-step guide will provide you with the necessary information to get your camera connected and working within a few minutes. Contact the Bosma customer support team if you have any questions about how to set up your new camera.
1 800-976-0881 | support@bosmausa.com | www.bosmausa.com

Main Features

• Premium HD 1080p Quality
  Stream, record, and watch video in full HD 1920 x 1080p @30fps.

• Super-Wide Field of View
  Covers more ground with remote controllable Pan/Tilt and gets up close with digital zoom.

• Local Video Storage
  Comes with a 16GB Micro SD Card (supports a 64GB Micro SD Card). Additional storage is available with the Bosma BaseBox.

• Motion Detection & Alerts
  Receive real-time app notifications with motion detection snapshots and video.

• Two-way Audio
  Talk and listen using an enhanced built-in mic and speaker with noise suppression technology.

• Infrared Night Vision
  Infrared (R) vision up to 50 feet.

Package Contents

• (1) Bosma AccessCam
• (1) 16GB Micro SD Card
• (1) USB Cable
• (1) Power Adapter
• (1) Quick Start Guide
• (2) Mounting Screws
• (1) Camera Bracket
• (1) Ethernet Cable
• (1) Reset Needle

Product Diagram

Bosma Home App Installation
Step 1. Bosma Home App Installation
Scan the Bosma Home App QR code or download the Bosma Home App from the App Store or Google Play.

Step 2. Register a Username and Sign in New Account

• Select “Sign Up” from the Home Screen
• Input a username and password of your choice
• Select “Sign Up”

Existing Account

• Input existing username and password
• Press “Sign In”

Step 3. Add Camera to Account

1. Connect the camera’s power cord to a power source.
2. Wait 60 seconds for the camera to turn on.
3. log in to the app, enter ‘Device List’ and click the ‘+’ icon in the top left corner.
4. Scan the QR code on the camera with the app (or enter the ID code on the label) to add the camera to the app.

Step 4. Network Connection
Method 1: Ethernet Connection

1. Connect the Ethernet cable (from the router) and click the Ethernet icon.
2. When the Ethernet light flashes green three times, the camera has connected to the network successfully.

Method 2 : WiFi Connection

1. Click the WiFi connection icon.
2. Enter the WiFi name and password of your wireless network and click “Next Step”.
3. Check if the WiFi connection indicator light flashes green and red three times. If yes, click “Next Step”. If not, reset the camera and wait until the WiFi indicator light flashes green and red three times then click “Next Step”.
4. Connect the camera to WiFi via sound or QR code

Connect by Sound
Increase your phone’s volume to the maximum level and place the phone speaker close to the mic of the camera. The camera should connect to the WiFi within 3 minutes (usually 1 minute). After it successfully connects, click “Next Step”.

Connect by QR code
Use the AccessCam to scan the QR code on the Bosma Home App. The camera should connect to the WiFi within 3 minutes (usually 1 minute). After it successfully connects, click “Next Step”. Add the camera to your device list. The app will require that you change the password of your camera for security purposes.

Bosma Home App
Once connected, the Bosma Home app is the control board of your Bosma
AccessCam and you may conduct the following actions:

• Adjust device settings
• Watch live video and take photos
• View saved videos and alarm messages
• Add new devices

Watch Videos & Take Photos
Select the camera from the device list to view live video, stored videos and photos. You can also view alarm messages and adjust device settings.

View Saved Videos & Alarm Messages
View the saved video recordings (Micro SD card or Bosma BaseBox) and alarm information by clicking on the “Records” dashboard. You can quickly search the videos and information by date.

Device Settings
Access the settings interface to set all specifications and functions of the camera based on your requirements.

• Check camera details
• Change the camera’s name
• Change your password
• Configure the camera’s network
• Update the firmware

Customer Support  BOSMA
Contact the Bosma customer support team if you have any questions about how to set up your new camera.
1 (800) 976-0881g support@bosmausa.com www.bosmausa.com
Bosma offers a one-year limited warranty on all products, for details please visit www.bosmausa.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>