BRAUN FX 3020 TributeCollection Food processor Instruction Manual

BRAUN FX 3020 TributeCollection Food processor

Our products are engineered to meet the highest standards of Quality, functionality, and design. We hope you thoroughly enjoy your new Braun appliance.

Before use

Please read the instructions carefully and completely before using the appliance.

Caution

• The blades are very sharp! Take hold of the blades by the knob only. After use, always first remove the blade from the bowl before removing the processed food.
• This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Children shall not play with the appliance.
• This appliance shall not be used by children.
• Children shall be kept away from the appliance and its main cord.
• Cleaning and user maintenance shall not be done by children without supervision.
• Always unplug or switch off the appliance when it is left unattended and before assembling, disassembling, cleaning, and storing.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Before plugging into a socket, check whether your voltage corresponds with the voltage printed on the bottom of the appliance.
• Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming.
• This appliance is designed for household use only and for processing normal household quantities.
• Do not use any part in the microwave.
• Make sure to avoid touching the running drives with your fingers.
• Put on the protective cover whenever a drive place is not in use since both drives rotate simultaneously when switching on the appliance.

Description

• The Braun food processor with the 2-bowl system meets the highest demands for kneading, mixing, blending, chopping, slicing, shredding, and grating, both simply and quickly.
• To obtain the best results, two different working bowls are available: a large food processor bowl 7 and a small chopper bowl j.
• Thus, for chopping, puréeing, or mixing you can choose between the large and the small working bowl. Moreover, you can use the small bowl to prepare the food which then can be further processed in the large bowl (e.g. to chop nuts for a nut cake dough). Only one bowl can be operated at a time.

1. Motor block

2. Cord storage

3. Motor switch (on = «I», off = «O»)

4. Pulse mode « »

5. Variable speed regulator (1-15)

6. Safety lock (avoids simultaneous operation of both working bowls)

7. Food processor bowl (2 l capacity)

8. Lid for food processor bowl 7

9. Pusher for lid 8

10. Chopper/mixer bowl for small quantity ties (0.75 l capacity)

11. Lid for chopper bowl 10

    • 11a Seal ring for lid 11

12. Blade for chopper bowl 10

13. Protective cover for a motor drive when the bowl has been taken off
    Attachments for food processor bowl 7

14. Blade for food processor bowl 7 with protective cover

15. Insert carrier

16. Fine slicing insert – a

17. Fine shredding insert – b

18. French-fries system

19. Kneading hook

20. Whipping attachment

Note: Before using the food processor for the first time, clean all parts as described under «Cleaning».

Overload protection

• To avoid damages caused by overload, this appliance is equipped with an automatic security switch that shuts off the current supply if necessary.
• In such case, turn the motor switch 3 back to «O» and wait approx. 15 minutes to allow the motor to cool off before switching on the appliance again.

Pulse mode « »

The pulse 4 mode is for example useful for the following applications:

• Chop delicate and soft food, e.g., eggs, onions, or parsley.
• Carefully fold the flour into dough or batter to maintain the creaminess.
• Adding whipped eggs or cream to more solid food.
• The pulse mode « » is activated by turning the motor switch to the left.
• The switch does not catch at this setting. Hold the switch in the pulse position or turn it to the pulse position repeatedly.
• Before activating the pulse mode, set the desired speed with the speed regulator 5. When releasing the pulse mode, the appliance is switched off.

Recommended speed ranges for individual attach ments

• Set the speed range utilizing the variable speed regulator 5.
• It is recommended to first select the speed and then switch on the appliance in order to work with the desired speed right from the beginning.

Attachments /Speed range

• Kneading hook 7
• Blade l and n 6 – 15
• Whipping attachment:
  • egg-whites 4 – 5
  • cream 2
• Slicing and
• shredding inserts 1 – 8
• French-fries system 1 – 2
• (please also refer to product printing)

Working with the 2-bowl system

• Only one working bowl can be operated at a time.
• The working bowl which is not used must be in the upper position or additionally, can be turned in the «click» direction where it is locked in place.
• When the arrow markings are aligned, the bowl can be taken off. For safety reasons, always put the protective cover m onto the free drive shaft after a bowl has been taken off.

Double safety feature

• The appliance can only be switched on when the desired working bowl with lid is properly engaged.
• If the lid is opened during operation, the motor switches off automatically.
• As in this case motor switch 3 is still on «I», turn it back to «O» to avoid switching on the motor accidentally.

Attaching the working bowls

The food processor bowl 7 is operated on the large drive place of the motor block 1. The chopper bowl j is opera on the small drive place.

1. With the motor switched off, place the respective bowl onto its drive place matching the arrow on the bowl with the arrow on the motor block (A).
   • Then turn the bowl in the «function» direction until the lower fixed stop is reached. The bowl on the other drive place must be in the lifted position. If the other drive place is free, put on the protective cover m.
2. Put the attachment needed (see instructions for each of the attachments) onto the drive shaft of the bowl and push it down as far as it will go (B).
   • When inserting the blade l onto the chopper bowl j, push it down until it audibly snaps in place.
3. Put the lid onto the bowl matching the arrow on the lid with the arrow on the bowl (C).
   • Then turn the lid clockwise guiding its nose into the safety lock opening of the motor block 1 until it audibly snaps in place.
   • N.B. When attaching the lid q of the chopper bowl j, it must be provided with the seal ring 11a.

Removing the working bowls

• Switch off the appliance. Turn the lid anti-clockwise and lift it off. Then turn the bowl in the «click» direction until the arrow on the bowl matches the arrow on the motor block and lift off the bowl.
• When removing the blade from a bowl, take hold of it by the knob and pull it off.
• Caution: The blades are very sharp!
• The blade n comes with a protective cover. If not in use, store the blade on the protective cover.
• Note: If you continue turning the food processor bowl in the «click» direction as far as it goes, beyond the stop position, you can lock the food processor bowl on the motor part. In this position, however, you cannot switch on the motor.

Cleaning

• First, always switch off the motor and unplug the appliance. Clean motor block 1 with a damp cloth only.
• All parts can be cleaned in the dishwasher. If necessary, clean all parts thoroughly with a spatula or a brush before rinsing them.
• Color-intensive food (e.g. carrots) may leave stains on the plastic parts; wipe them off with cooking oil before cleaning them with water.
• For cleaning the lid q, first remove the seal ring 11a. Put the seal ring back in place after cleaning. You can use the seal ring from both sides.
• Do not use sharp objects for cleaning purposes.
• Clean the blades and the inserts very carefully – they are very sharp!

Using the food processor bowl 7

When using the food processor bowl, always insert the required attachments before adding ingredients.

Kneading

• For kneading you can use the kneading hooks or the blade n. For best results, we recommend using the kneading hook which is specially designed for making yeast dough, pasta and pastries.

Yeast dough (bread/cake)

• Max. 500 g flour plus other ingredients Speed 7, 1 ½ minutes
• Pour the flour into the food processor bowl, then add the other ingredients – except liquids.
• Put on the lid 8 and lock in place.
• Then choose speed 7 and switch the appliance on.
• Add liquids by pouring them through the filling tube of the lid while the motor is running.
• When kneading with the blade n, do not add ingredients like raisins, candied peel, almonds, etc. which are not supposed to be cut. These have to be added manually after having taken the kneaded dough out of the food processor bowl.

Pasta dough

• Max. 500 g flour plus other ingredients Speed 7, 1 ½ minutes
• Pour the flour into the food processor bowl, then add the other ingredients – except liquids.
• Pour the required amount of liquid through the filling tube in the lid when the motor is running.
• Do not add any liquid after the dough has formed into a ball as then the liquid will no longer be absorbed evenly.

Pastries

• Max. 500 g flour plus other ingredients Speed 7, approx. 1 minute
• Pour flour into the food processor bowl, then add the other ingredients. For best results, be butter used must not be too hard, nor too soft.
• Put on the lid 8 and lock in place.
• Choose speed 7 and switch on the appliance.
• Stop kneading the dough shortly after a ball has formed. Otherwise, the pastry dough will become too soft.

Mixing

• For mixing cake dough or sponges use the blade n.
• The kneading hook s is not suitable for mixing cake doughs or sponges.
• Max. 500 g flour plus other ingredients

Cake mixture (2 methods) Speed / Time

• a) Cream butter with sugar end eggs 6 / ca. 1 min pour in the milk and 6 / ca. 15 secs carefully fold in 15 / ca. 10-15 x flour with pulse « » mode.
• b) Pour all ingredients except liquids into the food processor bowl. 15 / ca. 1 min
  • Add the required liquids through the filling tube of the lid while the motor is running. Finally, add ingredients like raisins manually.

Sponge Speed/Time

• Cream eggs and
• water (if required) 15 / ca. 2 mins
• and sugar 15 / ca. 4 mins
• fold in the flour with
• pulse mode 8 / 5 x « »
• add cocoa powder 8 / 3 x « »

Blending

• Use the blade n for blending soups, shakes, etc.
• Maximum capacity 2 l
• Speed 10 (otherwise the bowl may overflow)
• For milkshakes, pour coarsely chopped fruit into the food processor bowl.
• Put on the lid 8 and lock in place.
• With speed 15, blend fruit first, then add liquid at speed 10 and finish blending.
• When blending milk, please note that it will froth. Use smaller Quantities.

Chopping

• Chopping in the food processor bowl with the blade n
• Note: For processing larger quantities, use the food processor bowl 7 with blade n. For processing smaller quantities, we recommend using the chopper bowl j with blade l.

Processing examples

The processing times are approximate and depend on the quality, the amount of food to be processed, and the required degree of fineness.

fine 30 secs

Cheese (soft) 400 g           3-cm cubes      15                I 20 secs

Cheese (hard) 700 g            3-cm cubes      15                I 60-70 secs

Meat| 700 g| in cubes| 15| I| 40 secs
Carrots| 700 g| in pieces| 15| I| 10 secs
Onions| 700 g| quartered| 15| | 10 – 13 x

Slicing & shredding

• Place the insert you want to use into the insert carrier o as shown in (D) and snap into position. In order to remove the insert, push up the insert end that protrudes at the bottom of the insert carrier.
• Put the assembled slicer/shredder onto the drive shaft of the food processor bowl (E).
• Put on the lid 8 and lock in place. Set the speed and fill the food to be processed into the filling tube while the motor is switched off. Refilling should be done with the motor switched off.
• Never reach into the filling tube when the motor is running. Always use the pusher 9 (F).
• N.B.: When processing juicy or soft food, you will obtain better results at a lower speed. Hard food should be processed at a higher speed. Do not overload the food processor bowl.
• Fine slicing insert – a p Speed 1 – 2
• Processing examples: cucumbers, cabbage, raw potatoes, carrots, onions, radishes.

Fine shredding insert – b q Speed 3 – 6

• Processing examples: cheese (soft to medium), cucumbers, carrots, raw potatoes, and apples.

French-fries system 18

• Place the French-fries system onto the drive shaft, put on the lid 8, and lock it in place.
• For best results, place 3 – 4 potatoes(depending on size) in the filling tube of lid 8 while the motor is switched off. Set the speed to 1 – 2 and switch on the appliance.
• Before filling in a new load, switch the motor off. Use the pusher 9 to apply slight pressure when pushing the potatoes into the filling tube.

Whipping with the whipping attachment 20

• Speed/Time
  • Whipping sponges Max. 280-300 g flour plus ingredients
  • Cream eggs and water (if required) 5 / ca. 2 mins add sugar 5 / ca. 2 mins fold in flour 1 / ca. 30 secs
  • Whipping egg-whites
  • Min.: 2 egg-whites 4-5 / ca. 4 mins
  • Max.: 6 egg-whites 4-5 / ca. 6 mins
  • Whipping cream
  • Min.: 0.15-0.2 l 2/ca. 1-2 mins
  • Max.: 0.4 l 2/ca. 3.5-4 mins
  • Before whipping sterilized cream, keep the cream cool for several hours (at 4 °C approx.).

Using the chopper bowl 10

• The blade l can be used for chopping, blending, puréeing, and mixing smaller quantities.
• The chopper bowl is perfectly suited for preparing mousse, pastes, or dips.
• Maximum capacity: 750 ml liquid.

Caution:

• The blade 12 is extremely sharp.

Important: The maximum processing time in the chopper bowl is 1 minute. Liquids can be processed longer.

• Chocolate, hard spices, and coffee beans may not be chopped.
• With the motor switched off, insert the blade l in the chopper bowl 10, then place all ingredients into the chopper bowl.
• Liquids can be poured through the opening in the lid q when the motor is running.
• Put the lid 11 with the seal ring 11a onto the chopper bowl and close it as described earlier.
• After use, always remove the blade from the chopper bowl first and then empty the processed food. When blending milk, please note that it will froth. Use smaller quantities.

Processing examples
The processing times are approximate and depend on the quality and amount of food to be processed and the degree of fineness required.

Chopping

Blending

Vanilla-Honey-Prunes

• (as a pancake stuffing or spread) (use the chopper bowl j, speed 15)
• Fill 100 g creamy honey and 100 g prunes into the chopper bowl and chop for 10 seconds, then add 50 ml water (vanilla-flavoured) and resume chopping for 3 seconds.

Cleaning

• All parts can be cleaned in the dishwasher at temperatures up to 65 °C.
• Pulp and other residues should not become dry before the appliance is cleaned.
• The appliance may discolor when processing food with a high degree of pigments (e.g. carrots); use vegetable oil to clean it, before cleaning it with detergents or in the dishwasher.
• Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or appropriate collection points provided in your country.
• Subject to change without notice.

Mixing smaller dough quantities
The chopper bowl is only suitable for processing the following dough type; the recipe reflects maximum quantities:

Type 3202 www.braunhousehold.com. 5722010184/03.15 UK/KR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>