brilliantIdeas BIL1602 Laser Light Projector User Guide
- June 17, 2024
- brilliantideas
Table of Contents
brilliantIdeas BIL1602 Laser Light Projector
In the Box
Location of Controls
- Front lens
- LED lights
- Thumbscrew
- [POWER) button
- Fastener
- AC Adaptor
- Indoor mounting base
- Outdoor stake
- Stake adaptor
Using the Indoor Mount
- Set the mounting base on a flat surface.
- Attach the Laser Light Projector to the ounting base (See Figure 1).
- Slide the thumbscrew into position.
- Secure the thumbscrew with the included fastener.
- Angle the Laser Light Projector and tighten the thumbscrew.
- Connect the AC Adaptor to an electrical outlet.
Using the Laser Light Projector
- Quick press the [POWER] button to turn the projector on.
Changing the LED Light Modes
-
Quick press the [POWER] button to turn the projector on.
-
Quick press the [POWER] button for a second time to display a strobing red and green pattern.
-
Quick pressing the [POWER] button again projects a GREEN pattern.
-
Quick press the [POWER] button once more.
The LED light turns from GREEN to RED. -
Press the [POWER] button again to turn the projector off.
Using the Outdoor Stake
- Gently push the outdoor stake into the ground (If you are having difficulty mounting the outdoor stake, a rubber mallet can be used to safely secure it in the ground).
- Loosen the thumbscrew on the side of the Laser Light Projector to remove the projector from the mounting base.
- Attach the outdoor stake adaptor. Slide the thumbscrew into position.
- Secure the thumbscrew with the included fastener. Adjust the arm toward the outdoor stake and tighten the thumbscrew.
- Connect Laser Light Projector to the outdoor stake.
- Plug the Laser Light Projector into an outdoor electrical outlet.
NOTE: The Laser Light Projector will appear brighteset in the dark and may look dimmer if there are competing sources of light.
The Laser Light Projector includes a light sensor to conserve electricity so it will only turn on in the dark.
Only use an extension cord rated for outdoor use (not included) with the Laser Light Projector.
Safety instructions
DANGER:
Do not intentionally shine into eyes or face.
WARNING: Lasers should not be projected at or within the flight path of an aircraft within 1 O nautical miles from an airport. If your intended surface is within 1 0 nautical miles of an airport, lower the angle of the Laser Light Projector so that no lasers point into the sky.
CAUTION
Do not use the Laser Light Projector in any matter other than that intended by the manufacturer to avoid exposure to hazardous laser radiation.
Do not attempt to open the Laser Light Projector under any circumstance.
Legal information
READ AND KEEP THESE INSTRUCTIONS.
Caution: Any changes or modifications not expressly approved could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radioffV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective, or does not perform
properly, you may within ninety (90) days from your original date of purchase
return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
- Call the Customer Support number located below, or go to our website portal to receive an SRO number.
- Provide proof of the date of purchase within the package {Dated bill of sale).
- Prepay all shipping costs to the authorized service center, and remember to insure your return.
- Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
- Describe the defect or reason you are returning the product.
- Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.
The shipping address of the authorized service center is: Southern Telecom,
Inc.
Attention: Customer Service {2nd Floor) 14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this product, please contact our customer service department at:
Customer Support:
Phone: 1-877-768-8481
Monday-Friday 8AM-1 0PM{EST)
www.southerntelecom.com
Click on “Product Support”
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, and unauthorized
modification. This warranty is voided in the event any unauthorized person
opens, alters or repairs this product. All products being returned to the
authorized service center for repair must be suitably packaged.
Limitation of Warranty:
- THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
- REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BYTHE LAWS OF THE STATE OF NEW YORK. EXCEPTTOTHE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
- Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>