BRAUN 2675 cruZer Men’s Electric Shaver Instruction Manual

BRAUN 2675 cruZer Men’s Electric Shaver

Our products are designed to meet the highest standards of quality, functionality, and design. We hope you entirely enjoy your new Braun shaver.

Warning

• Your shaver is provided with a special cord set with an integrated Safety Extra Low Voltage power supply.
• Do not exchange or manipulate any part of it. Otherwise, there is a risk of electric shock.

HOW TO USE

Description

1. Foil protection cap
2. Shaver foil
3. Cutter block
4. Long hair trimmer
5. Charging light
6. On/off switch
7. Special cord set

Charging

The best environmental temperature for charging is between 15 °C and 35 °C.

• Using the special cord set, connect the shaver to an electrical outlet with the motor switched off.
• When charging for the first time, leave the shaver to charge continuously for 4 hours. The green charging light (5) shows that the shaver is being charged. When the battery is fully charged, the charging light intermittently blinks on and off. This indicates that the battery maintains its full capacity.
• A full charge provides 30 minutes of cordless shaving time depending on your beard growth.
• Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.
• Maximum battery capacity will only be reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set.

Shaving

• Remove the foil protection cap (1). Activate the on/off switch (6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.
• For pre-shaving after a few days of not having shaved, use the long hair trimmer (4) to pre-cut long hairs. For a close, smooth shave, finish with the foil.

Trimming

• Push out the long hair trimmer (4). It allows controlled trimming of mustache and sideburns.
• It evenly cuts and trims larger areas: Ideal for shaping sideburns, mustaches, and partial short beards.
• Frequent use of the long hair trimmer may reduce the battery capacity.

Tips for the perfect shave

• We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin. Stretch the skin and shave against the direction of beard growth.
• To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn.

Cleaning

• This appliance is suitable for cleaning under an open water tap.
• Warning: Detach the hand-held part from the power supply before cleaning it in water.

Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:

• Switch the shaver on (cordless) and rinse the shaving head under hot running water (b). A natural-based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver, and remove the shaver foil and the cutter block. Then leave the disassembled shaving parts to dry.

Alternatively, you may clean the shaver using the brush provided (c):

• Switch off the shaver. Remove the shaver foil.
• Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.

Keeping your shaver in top shape

• About every four weeks, clean the cutter block with Braun cleaning agents. Put a drop of light machine oil onto the long hair trimmer and the shaver foil (d).

Replacing the shaving parts

• To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn.
• Change both parts at the same time for a closer shave with less skin irritation.
• (Shaver foil and cutter block: 2000 series)

Preserving the batteries

• To maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately.
• Then recharge the shaver to full capacity.
• Do not expose the shaver to temperatures higher than 50 °C for extended periods.

Environmental notice

• This product contains rechargeable batteries.
• In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life.
• Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
• Subject to change without notice.
• This product conforms to the European Directives
• EMC 89/336/EEC and Low Voltage 73/23/EEC.
• Electric specifications see printing on the special cord set.
• 5-732-350/00/VIII-05 Korea/GB
• Type 5732

www.braun.com/register.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>