GardePro B180C Video Baby Monitor User Guide

GardePro B180C Video Baby Monitor

Specifications

• Camera (Baby Unit) Model: B180C
• Monitor (Parent Unit) Model: B180M

Product Usage Instructions

Safety Instructions

This instruction manual can assist you in gaining a thorough understanding of our product and guide you in solving any problem that may arise during use. Please read this instruction manual carefully before using the device.

• WARNING: Keep the adapter cord 3ft(1m) away from the baby to prevent the risk of entanglement and suffocation.
• NEVER place the camera or power supply inside a child’s cot/crib.
• SHOCKING WARNING: To prevent electric shock, NEVER install the baby monitor set near a heat source.
• Never touch the plug with a sharp or metal object.

Battery Warning

Rechargeable Li-ion Battery:

• Do not open, puncture, crush, or drop the battery in the monitor.
• Never replace the battery in the monitor. This can result in the risk of explosion, fire, overheating, and leakage of the electrolyte.
• Do not short the external contacts of the monitor.
• Do not leave the monitor in a car exposed to direct sunlight for a long time.
• Do not attempt to charge the monitor again if you notice that it is overheating.

Monitor and Camera Settings and Usage

This baby monitor system (or set including monitor and camera)  meets all relevant standards related to electromagnetic fields and is safe to use when operating by the instruction manual.
If you purchase a camera SEPARATELY from us, you must follow the instructions in the manual to connect it to a compatible monitor for use.

• Place the monitor on a flat surface, such as a dressing table,  writing desk, or shelf.
• Fix the camera in a location where babies can be easily observed.
• Keep the camera’s temperature sensor away from the cooling holes at the back to ensure precise ambient temperature.
• Please keep this manual in a secure location for future reference.

Important Notes for Installing Baby Monitor
When using your baby monitor, you must ensure that:

• [Insert important notes for installing the baby monitor]

What is Included
This baby monitor set includes a parent unit and one or more baby units according to the user’s order:

1. Parent unit: 1 x Monitor, 1 x 5V/2A Power Adapter for the Monitor, and 1 x 3ft/1m USB power & data cord.
2. Baby unit: Each baby unit is equipped with a camera and a set of accessories. 1 x Camera, 1 x 5V/2A Power  Adapter for Camera, 1 x 9ft/3m USB cord, and 1 x Wall Mount.  1 x Instruction Manual

Frequently Asked Questions (FAQ)

Insert frequently asked questions and their answers related to the product here

• Camera (Baby Unit) Model# B180C
• Monitor (Parent Unit) Model# B180M

SAFETY INSTRUCTIONS

This instruction manual can assist you in gaining a thorough understanding of our product and guide you in solving any problem  that may arise during use. Please read this instruction manual carefully before using the device

WARNING

• DANGER – Keep the adapter cord 3ft(1m) away from the baby  to prevent the risk of entanglement and suffocation.
• NEVER place the camera or power supply inside a child’s cot/crib.
• SHOCKING WARNING – To prevent electric shock, NEVER use the camera or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc.
• Use only the AC adapters and cords provided in the box. Never  use unofficial third-party power adapters or cords that are not specifically designed for the device, as they may cause damage.
• This product is not a toy. Do not allow children to play with it.
• You MUST check your child’s activity regularly, as this product cannot alert parents to the silent activities of a child.
• This product is not intended for use as a medical monitor.
• This product cannot replace adult guardianship.
• Always unplug the AC adapters from wall outlets and power sources during periods of non-use.
• This product is intended for indoor use only.
• This product must be assembled by an adult. Please keep small parts away from children during assembly.
• Never cover the set with a towel, blanket and etc
• Never install the baby monitor set near a heat source.
• Never touch the plug with a sharp or metal object.

Rechargeable Li-ion Battery

• Do not open, puncture, crush or drop the battery in the monitor. Never replace the battery in the monitor. This can result in the  risk of explosion, fire, overheating, and leakage of the  electrolyte.
• Do not short the external contacts of the monitor.
• Do not leave the monitor in a car exposed to direct sunlight for a  long time.
• Do not attempt to charge the monitor again if you notice that it is  overheating

Monitor and Camera Settings and Usage

This baby monitor system (or set including monitor and camera) meets all relevant standards related to electromagnetic fields and is safe to use when operating in accordance with the instruction  manual.
If you purchase a camera SEPARATELY from us, you must  follow the instructions in the manual to connect it to a compatible  monitor for use.

• Place the monitor on a flat surface, such as a dressing table,  writing desk, or shelf.
• Fix the camera in a location where babies can be easily  observed.
• Keep the camera’s temperature sensor away from the cooling holes at the back to ensure precise ambient temperature.
• Please keep this manual in a secure location for future reference.

Important Notes for Installing Baby Monitor

• When using your baby monitor, you must ensure that the devices can establish radio communication. The distance of communication between the camera and monitor may be impacted by environmental conditions. Due to the unstable and constantly changing nature of wireless communication, the distance and signal quality may fluctuate, which is a normal occurrence.
• Large metal objects, such as refrigerators, metal doors, or  reinforced concrete, may block radio signals between two units.
• The strength of the signal may be weakened by solid structures  like walls, as well as radio or electrical equipment such as televisions and computers.
• If the signal is weak, try relocating the device to a different  indoor location or adjusting the monitor’s antenna.
• Do not place the parent unit and the camera within one meter of each other, as it may cause howling if the volume is set too high.
• When you first receive the product, the parent unit may have a  protective film. You can choose to keep it on or remove it.

WHAT IS INCLUDED

This baby monitor set includes a parent unit and one or more baby unit according the user’s order.

1. Parent unit : 1 x Monitor, 1 x 5V/2A Power Adapter for Monitor, and 1 x 3ft/1m USB power & data cord
2. Baby unit : Each baby unit is equipped with a camera and a set of accessories. 1 x Camera, 1 x 5V/2A Power Adapter for  Camera, 1 x 9ft/3m USB cord, and 1 x Wall Mount.
3. 1 x Instruction Manual

SYSTEM INTRODUCTION

ABOUT THE MONITOR

The B180M is a monitor designed for parents, featuring a 5-inch HD screen and 11 buttons (M, Fn, OK are multi-function buttons, follows the guidance on the screen).

ABOUT THE CAMERA

The B180C camera can monitor the baby, play lullabies, detect sound, motion, and environmental temperature. Table 3: Camera Interfaces and descriptions

3 Micro-SD socket

| Reserved for future use, e.g., firmware upgrading, video storage.

*Tilt up to the maximum position to find it.

4 Speaker| Play sound.

5 Indicator light

| Show the camera’s status: Green for power on, Flashing Green for connecting / updating, and OFF for successful operation.

• It can be turned off/on by the monitor.

---|---
6 Temperature sensor| Detect the environment temperature.

• Keep it away from back cooling holes.

7 USB type-C jack| Supplying power, supporting 5V/2A only.
8 Mounting hole| For mounting on the wall using the wall mounting accessories.

9 PAIR

| Press the button to add the camera to the monitor following the instructions on the

screen.

GETTING STARTED

This standard baby monitor system consists of a parent unit and a  paired baby unit.
To connect a SEPARATLY PURCHASED camera, please follow Section 5: “MENU” > “Camera Management” > “+” to add.

POWER THE CAMERA

1. Correctly insert the USB-A plug of the 9ft power cord into the jack of the 5V/2A power adapter. Make sure to insert the cord  in the correct orientation to avoid damaging the cable or device.
2. Correctly insert the USB-C plug of the 9ft power cord into the USB type-C jack of the camera.
3. Insert the power adapter into your power outlet and ensure that it is switched on. You will now see the green light of the camera flashing, indicating that it is powered well.

POWER THE MONITOR AND CONNECT

1. Correctly insert the USB-A plug of the 3ft power & data cord into the jack of the 5V/2A power adapter.
2. Correctly insert the USB-C plug of the cord into the USB  type-C jack of the monitor.
3. Insert the power adapter into one of your power outlets and ensure that it is switched on.
4. Press and hold the Power button ” ” for approximately 2  seconds, then the screen will light up, and within about 15  seconds, the live stream will appear on the screen.
   CONGRATULATIONS! You have completed the most important task! You can take care of your baby now! If you cannot view the live stream, you may see operation guidance on the screen, or you can refer to Section 6 (Troubleshooting) for further assistance.

MOUNT THE CAMERA ON THE WALL

Before installing the camera, assess the effectiveness of your installation and verify the camera’s positioning by placing it against the wall at the desired location. Position the camera at a distance of more than 3ft from your baby’s crib to ensure optimal viewing.

1. Securely hold the bracket against the wall. Then, use a marker to indicate the locations of the three mounting holes.
2. Use a 1/5-inch (6mm) drill bit to create three holes at the marked locations on the wall.
3. Insert the three anchors into the wall and gently tap them with a  hammer until they are flush with the surface of the wall.
4. Align the anchor holes on the wall, place the bracket, and insert the three screws through the three holes of the bracket into the anchors. Tighten the screws securely.
5. Locate the mounting hole on the bottom of the camera and align it with the head of the bracket. Rotate the camera around the hole until it is firmly attached to the bracket.
6. Rotate the head bolt of the bracket to securely attach the camera.  Next, adjust the camera to a suitable position and securely tighten the bracket’s seat bolt.
7. Connect the power adapter to the camera unit.
8. Ensure that the camera unit is properly secured. If it is loose,  you may need to tighten the screws and bolts more securely.
   Tip 1: You may use wall clips (not included) to secure the power cord away from the crib or out of the baby’s reach.
   Tip 2: You may visit the help video in our website from Menu -> Help -> Guide videos to find the link.

MENU OF MONITOR

Camera Settings

| Sound detection, Temperature monitoring,

Motion detection, Night vision, and Indicator lights and etc.

Alarm*| Duration, Volume, Sound, Timer, and more.

*Alarm may conclude Timer in some version.

General Settings| Data, Time, Display, Patrol, etc.

Camera Management

| Remove the Camera On the Monitor:

Press M button to enter the menu > Navigate to camera management > Select a camera > OK to remove the camera > OK.

Add Camera:

On the Monitor: Press M button to enter the menu > Navigate to camera management > Select “ + ” > OK to add a camera.

On the Camera: Press the “ PAIR ” button located under the camera within 30 seconds.

Software Update| Version information, Monitor firmware updates, Camera firmware updates etc.

Help

| Contact us, Guide videos, and links to Instruction Manuals, etc.

• To keep up to date with the latest versions, please refer to the detailed operation instructions provided by the links in “Help”.

Press Fn to find more frequently used functions such as Lullabies, Timers, Camera Switch and etc.

TROUBLESHOOTING

• Make sure every device is powered on.
• Wait for 20 seconds after each step to verify if it runs correctly.
  Questions| Solution steps
  ---|---

Disconnect

| (1) Take the monitor and move closer to the camera to reconnect them.

(2) Press and hold the Power button for 3 seconds. Follow the instructions to press OK to turn off the monitor. Then, press and hold the Power button again to restart it.

(3) Unplug and re-plug the camera’s power adapter.

(4) Remove the camera, then add the camera (Section 5).

Screen Freeze

| (1) To force a shutdown, press and hold the Power

button of the monitor until the screen is off.

(2) Press and hold the Power button for 1-2 seconds to restart the monitor.

Table 5: Troubleshooting for Baby Monitor

You can find more helpful information on our website link to assist you in addressing these issues. You can access the user guide, watch instructional videos, download the latest firmware, and more. If you continue to have trouble with your device, please contact us and provide your order number. Rest assured and we will make things right for you.

References

• Bedienungsanleitungen, Anleitungen
• The domain name instrucciones.es is for sale | Dan.com
• Nom de domaine à vendre : instructions.FR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>