loranu N1 2 in 1 Fan and Heater Combo User Manual

loranu N1 2 in 1 Fan and Heater Combo User Manual

INSTALLATION INSTRUCTION

Description

-The mesh cover is designed with a fine and dense grille, which is not easy to deform,

dissipates heat faster, and is safer. Centralized air outlet, with obvious temperature rise, uses aerodynamic principles to design flow channels, and outputs unobstructed cold and warm air Simple and easy to understand control panel, power indicator light, and gear buttons are clear at a glance, making it easy to operate Soft tone heating, low noise, does not affect children’s sleep and learning, making it more comfortable to use.

Usage method

1. Before use, please insert the power plug of the heater into the socket where the 110-220V power supply is powered on.
2. Turn on the heater as shown in the above diagram, and the heater will start working.

Maintenance

• Please do not approach open flames to avoid discoloration and deformation of the body.
• Regularly clean the intake and outlet grilles to avoid blockage.
• Use a soft cloth dipped in a neutral detergent to remove surface dirt, and then wipe dry with a dry cloth.

Note

• When using it for the first time, please check if the power supply you are using matches the product and ensure that the socket you are using is well grounded. Please note that the rated current of the socket should be greater than 5A.
• This product is strictly prohibited from use in environments with flammable and explosive materials; It is strictly prohibited to use in environments with severe dust and oil pollution, and the ambient temperature should not exceed 30 degrees Celsius.
• Do not use this heater around bathtubs, nozzles, or swimming pools.
• The heater must not be covered. It is prohibited to bake items on the heater to prevent a fire.
• When cleaning and maintaining, first unplug the power plug and wait for the body to cool before proceeding.
• After use, when going out or not in use for a long time, turn off the power switch first, and then unplug the power plug.
• If the power cord is damaged, in order to avoid danger, it must be replaced by professionals from the manufacturer, its maintenance department, or similar departments.
• The heater must be placed on a flat surface or tabletop for use.
• It is strictly prohibited to touch the protective net cover when the heater is working to prevent high-temperature burns: Please pay special attention to children.
• Due to the risk of fire caused by the heater being covered or improperly placed, it is not allowed to use a programmer, timer, or any other device that can automatically turn on the power to use this heater.
• Do not operate the heater switch or unplug the power cord with wet hands to prevent electric shock.
• Protective covers do not provide comprehensive protection for children or people with disabilities; Children should be supervised to ensure that they do not play with this heater.
• This product is only suitable for indoor use, please do not use it outdoors.
• The heater should not be directly placed under the power socket for use, and should not be directly blown towards the socket or other flammable and explosive materials. Do not bend, pull, or entangle the power cord to prevent it from overheating and damage.
• This product is not suitable for use by individuals with physical, sensory, or intellectual disabilities or those lacking experience and common sense, unless someone else can ensure its safety and supervise it.
• Before moving, unplug the power plug and allow the standby body to cool before moving. Be careful when moving and do not directly pull the power cord to move the body.
• This product should not be placed next to curtains or indoor furniture. It should be placed at least 50 centimeters away from the wall and furniture, and there should be no obstruction within 50 centimeters of its top to facilitate air circulation.
• Do not use and store in damp and dusty areas for a long time to avoid shell corrosion or electric leakage or shock accidents caused by moisture.
• Do not disassemble the body at will, and do not modify this product in any form to avoid danger.
• It is normal for the product to make a slight noise when connecting to the power supply.
• Warning: To avoid overheating, it is prohibited to cover the heater.

Product parameters

11280000WW
Gear adjustment| Third gear (cold and warm air)| Made in China

warranty card

customer| Name:| Warranty Period| a year| Purchase date|
---|---|---|---|---|---
Address:
year month day|
Phone:
Please fill out each column of this guarantee in detail and stamp it with the dealer’s seal, otherwise it will be invalid.1.  If any quality issues are found within three days from the date of purchase of this product, as long as the appearance is not damaged and the user does not disassemble or repair it on their own, they can be replaced with the entire machine (excluding packaging) at the purchasing store with an invoice.2.  Starting from the date of purchase, this product will be repaired for free under normal use with relevant certificates. One of the following situations does not fall within the scope of warranty and is subject to paid r epairs:A.  Those who fail to present the guarantee letter and relevant documents.B.  Damage caused by improper use, disassembly, and s torage by consumers.C.  Damage caused by uncontrollable factors.D.  Failure or damage caused by non ordinary household use.F. The appearance is naturally stained due to use.| Certificateof conformity| inspector|
|
|
Dealer signature and seal| |

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>