CLI-MATE CLI-AW200L Air Washer Instruction Manual
- June 17, 2024
- CLI MATE
Table of Contents
CLI-MATE CLI-AW200L Air Washer
Congratulations on your purchase of a CliMate Air Washer.
The CliMate Air Washer reduces indoor air pollutants by drawing in air that is then cleansed by the cyclonic action of the fan and water drawn from the reservoir. It then releases clean and fresh air back into the room.
Note: Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference. The system must be properly installed and located by the installation instructions before it is used. During the setup of this product if you have any questions/comments/issues DO NOT RETURN TO STORE. FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT, CALL 1300 764 325.
CUSTOMER CARE: 1300 764 325 Register your warranty online at www.cli- mate.com.au/warranty-and-registration Aquaport Corporation Pty Ltd 66-70 Hardys Road, Torrensville SA 5031
- Telephone: 08 8354 0711
- Web: www.cli-mate.com.au
- Social: If/climatebrand@climatebrand
Electrical Requirements:
Australia / New Zealand 220-240V 50/60Hz Due to manufacturing alterations
product may vary slightly from the pictured.
SAFETY PRECAUTIONS
Read all instructions carefully.
- All components need to be installed under the user manual instructions for correct performance of unit.
- This appliance should be used in conjunction with a safety switch.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Keep the air outlet free from air-blocking materials such as clothing, plastic bags or papers.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance for other than intended use.
- Ensure the appliance is on a flat, even surface.
- To protect against fire, electric shock, and personal injury, do not immerse cords, plugs, or appliances in water or other liquid.
- Unplug from the outlet when not in use and before cleaning.
- Do not use outdoors.
- Do not place on or near a hot gas, electric burner, heating appliance or in a heated oven.
- Place unit in a flat well-ventilated location at least 30cm from wall or other Appliances.
- Do not immerse the base in water or try to disassemble it.
- Check the voltage to be sure that the voltage indicated on the nameplate agrees with your voltage.
- Do not remove the lid of the unit when it is in operation.
PRODUCT SPECIFICATIONS
Air Washer Specifications
OPERATION INSTRUCTIONS
-
Locate a flat stable location with close access to a power point. Make sure there is at least 30 cm between the unit and the wall or other appliances.
-
Lift off lid of the air washer and fill water bowl with clean tap water to the MAX line.
-
Add 2-3 drops of aroma oil into the water bowl (optional) and place the lid back on.
Warning: It is recommended that asthma sufferers or those sensitive to fragrances should avoid adding aroma oils to the water as it may act as an irritant. Some fragrances may cause allergic responses in some people. -
Plug the power adapter into the unit and the appropriate electrical outlet and place the Air Washer on the silicon pad provided.
-
Press the power button to turn on. The LED light will illuminate, the water in the water bowl will begin to swirl and the unit will start to clean the air.
Note: The LED light will slowly transition into different colors. -
During the LED color transition, if it reaches a color that you wish to ‘lock in’ press the Power button. The light will now stay the selected color and will not change. Press Power button again to turn off the LED light and again to turn off the air washer.
-
When the water inside the bowl becomes dirty, turn off the unit and replace with clean tap water. During the set up of this product if you have any questions / comments / issues DO NOT RETURN TO STORE FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE CALL 1300 764 325
CLEANING AND MAINTENANCE
Before carrying out any maintenance or cleaning of the unit, make sure that the power to the unit is turned off and the power cord is removed from the unit and power socket.
External cleaning of the unit
- Do not clean the unit with any abrasive cleaning agents or solvents.
- Only use a soft clean cloth for all external cleaning purposes.
- Do not submerge the unit in water.
- Only use a soft clean cloth for all cleaning purposes.
- Cleaning the Axle
- Turn off the unit and pull off the rotating fan. (Fig 1)
- Twist to remove the axle from the rotating fan. (Fig 2)
- Use a cleaning brush to remove dirt. (Fig 3)
- Ensure all components are firmly re-attached after cleaning.
COMPONENT IDENTIFICATION AND CHECKLIST
TROUBLESHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLESHOOTING TIPS FIRST
.
Your Aquaport 12-Month Repair or Replacement Warranty
Aquaport warrants this appliance to the first purchaser and is subject to
the stated conditions: Warranty covers any defects in material or workmanship
in the manufactured product within the first twelve months from the date of
purchase. To make a warranty claim you must call Aquaport on toll free number
1300 764 325 for instructions. If a product is found to be faulty there is a
90-day return policy from the date of purchase. For warranty claims outside of
90 days from the date of purchase, the product will be repaired or replaced at
our discretion. Repair or replacement costs of the product will be covered
under warranty by Aquaport. Goods presented for repair may be replaced by
refurbished goods of the same type rather than being repaired. Refurbished
parts may be used to repair the goods. The benefits given to you by this
warranty are in addition to other rights and remedies of the consumer law with
the goods or services to which this warranty relates. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if goods fail to be of acceptable quality and
the failure does not amount to a major failure.
Conditions of this Warranty
- This product has been fully installed under the user manual installation instructions.
- The warranty extends only to repairing or replacing any component that proves to be defective in material or workmanship.
- The warranty does not cover defects occasioned by misuse, alterations, accidents, or use for other than the intended purpose.
- The warranty does not cover damage to the product caused by an accident, fire, or flood.
- Proof of purchase is required for warranty claims.
Please keep the purchase receipt in a safe place.
To enable us to register your warranty and provide service should a problem
occur, we recommend you register your warranty online at: www.cli-mate.com.au
/warranty-and-registration
Aquaport Corporation Pty Ltd
66-70 Hardys Road, Torrensville SA 5031
Customer Care 1300 764 325
CUSTOMER CARE: 1300 764 325 Aquaport Corporation Pty Ltd 66-70 Hardys Road, Torrensville SA 5031
- Telephone: 08 8354 0711
- Facsimile: 08 8354 0722
- Email: [email protected]
- Web: www.cli-mate.com.au
- Social: If /climatebrand @climatebrand