GMEENING ADEE YC-617W22 Wireless Charger Instructions
- June 17, 2024
- GMEENING ADEE
Table of Contents
GMEENING ADEE YC-617W22 Wireless Charger
UK Warning
- Use the correct power supply: Ensure to use the power supply recommended or provided by the charger manufacturer. Using an unsuitable power supply may cause the charger to overheat, cause electric shock, and even cause a fire.
- Do not cover the device during charging: When the device is charging, it should not be covered to prevent excessive heat generation. Excessive heat may cause damage to batteries and equipment.
- Avoid contact with metal objects: Wireless chargers should not be placed near metal objects during charging, as they may interfere with the charging process and may even cause overheating or fire.
- Avoid using damaged chargers: If there is any obvious damage to the wireless charger, such as broken wires, cracks, loose components, etc., it should not be used again. Using a damaged charger may cause electric shock or fire.
Instructions for Use
Connect the adapter and turn on the power. Place the device in the charging area. Cover the device or place the charger near a metal object. If there are signs of damage to the charger, immediately stop using it.
WEEE
Information on electrical and electronic equipment
The following notice is intended for private end-users using electrical and/or
electronic equipment.
- Separate collection of waste equipment
- Electrical and electronic equipment that has become waste is referred to as waste equipment.
- Owners of old equipment must record them separately from unsorted municipal waste.
- In particular, old equipment does not belong in household waste, but in special collection and return systems.
- Batteries and accumulators
- Owners of waste equipment shall, as a rule, separate waste batteries and accumulators that are not enclosed by the waste equipment from it before being handed over to a collection point.
- This does not apply if the waste equipment is handed over to public waste management bodies and separated from other waste equipment there for preparation for reuse.
- Possibilities of returning old equipment
- If you own old equipment, you can return or collect old equipment for proper disposal of the old equipment to the facilities established and available by public waste management bodies.
- Where appropriate, it is also possible to hand over electrical and electronic equipment to reuse the equipment. Further information can be obtained from the respective collection or collection center. Return point.
- Privacy Policy
- Old equipment often contains sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones.
- In your interest, please note that each end user is responsible for the deletion of data on the waste equipment to be disposed of.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance
between 20cm of the radiator and your body.
EU
- This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- All essential radio test suites have been carried out.
- This product can be used across EU member states.
Declaration of Conformity
- Hereby, GMEENING ADEE OÜ declares that the product type YC-616W22 complies with Directives 2014/53/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://cvruntgds.com
- This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
TX/RX Frequency Range and Max Radiated H-Field(Only for EU):
- Phone:110-148kHz; Max Radiated H-Field: 1.95 dBuA/m(@10m)
- TWS: 110-148kHz; Max Radiated H-Field: -17.23 dBuA/m(@10m)
- watch: 300-350kHz; Max Radiated H-Field: -6.31dBuA/m(@10m)
Germany agent
- Name: Sea&Mew Consulting GmbH
- Adresse: Mittenhuber Straße 4, 92318 Neumarkt
- E-Mail: Compliance.
- EU@outlook.com
- Ansprechpartner: Yuan Li
UK Specification
- Product Name: Wireless Charger
- Model: YC-617W22
- Trademark: LUOATIP
- Email: Gmeeningadee@outlook.com
- Input: DC 9V/3A
- Output: Watch
- Output: 3W(Max.)
- Earbuds Case: 5W(Max.)
- Wireless Phone Output: 15W(Max.)
- Product Size: 170mm145mm14mm
- Weight: 200g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>