IKEA STRÅLA J1532 Cord Set with Led Bulb Instructions

: June 17, 2024
: Ikea

Table of Contents

IKEA STRÅLA J1532 Cord Set with Led Bulb
IMPORTANT SAFETY
INSTRUCTIONS
USE AND CARE
USER SERVICING
SAVE THESE
INSTRUCTIONS
Suitable shades
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IKEA STRÅLA J1532 Cord Set with Led Bulb

Specifications

Model:J1532
Power: 125 Volts
Fuse: 5amp

Safety Instructions

When using electrical products, it is important to follow these safety precautions:

Read and follow all safety instructions.
Do not replace the attachment plug.
Do not remove the safety device (fuse) in the attachment plug.
Discard the product if the attachment plug is damaged.

User Servicing Instructions

To replace the fuse, follow these steps:

Grasp the plug and remove it from the receptacle or outlet device. Do not unplug by pulling on the cord.
Open the fuse cover.
Slide open the fuse access cover on top of the attachment plug towards the blades.
Remove the fuse carefully.
Replace the fuse only with a 5amp, 125 Volt fuse provided with the product.
Close the fuse cover.
Slide close the fuse access cover on top of the attachment plug.

Suitable Shades
The following shades are suitable for use with this product:

905-824-90
105-824-89
605-836-55
905-836-54
005-824-80
805-824-81
205-836-57
405-836-56
205-824-79
405-832-94
605-832-93
405-824-59
605-824-82
705-836-45
105-826-39

IMPORTANT SAFETY

INSTRUCTIONS
When using electrical products, basic precautions should always be followed:

READ AND FOLLOW ALL SAFETY

INSTRUCTIONS

Do not use seasonal products outdoors.
This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters, fire places, candles or other similar sources of heat.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Do not let lamps rest on the supply cord or any wire.
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
This is an electrical product – not a toy!
To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from cord, wire or light string. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
Do not cover the product with cloth, paper or any material not part of the product when in use.
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
Read and follow all instructions that are on the product or provided with the product.

USE AND CARE

INSTRUCTIONS
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in
the lampholders or enclosures, loose connections, or exposed copper wire. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.

USER SERVICING

INSTRUCTIONS
How to replace the fuse

Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
Remove fuse carefully.
Risk of fire. Replace fuse only with 5amp, 125 Volt fuse provided with product.
Close fuse cover. Slide close the fuse access cover on top of attachment plug.

CAUTION
Risk of fire.
Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.