Dimplex DF2426GB Electric Fireplace Owner’s Manual

Dimplex DF2426GB Electric Fireplace

Product Information

• Specifications:
  • Models: DF2426GB, DF2426SS, DF2550
  • Brand: Dimplex
  • Power Source: Electric
  • Manufacturer: Dimplex
  • Website: www.dimplex.com.
• Welcome & Congratulations
  • Thank you and congratulations for choosing to purchase an electric fireplace from Dimplex, the world leader in electric fireplaces.
  • Please carefully read and save these instructions.
• Important Instructions
  • Please read all instructions before using the electric fireplace.
  • The heater becomes hot during use, so avoid touching hot surfaces with bare skin.
  • The trim around the heater outlet also becomes hot, so keep combustible materials at least 3 feet (0.9 m) away from the front of the unit.
  • Exercise extreme caution when using the heater around children or invalids, and never leave the unit operating and unattended.
  • Always unplug the electric fireplace when not in use.
  • Do not operate the unit if the cord or plug is damaged, if the heater has malfunctioned, or if the electric fireplace has been dropped or damaged in any manner.
  • In such cases, return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.

Product Usage Instructions

• Site Selection and Preparation
  • Choose a suitable location for the electric fireplace. Ensure that there is enough space around the unit for proper ventilation.
  • Keep the fireplace away from flammable materials, such as curtains, furniture, bedding, and paper.
  • Ensure that the power outlet is easily accessible and can handle the electrical load of the fireplace.
  • Prepare the installation area by cleaning it and removing any obstacles.
• Fireplace Installation
  • Refer to the installation section in the complete user manual for detailed installation instructions specific to your model.
  • Ensure that the electric fireplace is securely mounted or placed on a stable surface.
  • Connect the fireplace to a suitable power outlet.
  • Follow any additional instructions provided in the user manual for proper installation.
• Operation
  • Make sure the fireplace is properly installed and connected to a power source.
  • Check that all controls are in the off position before turning on the fireplace.
  • Use the control panel or remote control to adjust the temperature, flame settings, and other features according to your preferences.
  • Follow the safety instructions provided in the manual regarding the usage and placement of the fireplace.
• Warranty
  • Refer to the warranty section in the complete user manual for detailed information about the warranty coverage, terms, and conditions.
• Replacement Parts
  • If you need to replace any parts of the electric fireplace, refer to the replacement parts section in the complete user manual for a list of available parts and instructions on how to order them.
• FAQ
  • Q: Where can I find troubleshooting and technical support?
  • A: For troubleshooting and technical support, visit www.dimplex.com/customer_support or call toll-free 1-888-DIMPLEX (1-888-346-7539) from Monday to Friday, 8:00 a.m. to 4:30 p.m. EST. Make sure to have your model number and product serial number ready.
  • Q: What should I do if I have questions about operation or assembly, require parts information, or need assistance with a product under warranty?
  • A: Contact Dimplex at www.dimplex.com/customer_support or call toll-free 1-888-DIMPLEX (1-888-346-7539) from Monday to Friday, 8:00 a.m. to 4:30 p.m. EST. Make sure to have your model number and product serial number ready.

Always use a qualified technician or service agency to repair this stove.

• NOTE: Procedures and techniques that are considered important enough to emphasize.
• CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
• Warning: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, or death.

Welcome & Congratulations

Thank you and congratulations for choosing to purchase an electric fireplace from Dimplex, the world leader in electric fireplaces. Please carefully read and save these instructions.

• CAUTION: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.
• Please record your model and serial numbers below for future reference: model and serial numbers can be found on the Model and Serial Number Label of your fireplace.

STOP NO NEED TO RETURN TO THE STORE

Questions with operation or assembly? Require Parts Information? Product Under Manufacturer’s Warranty?

• Contact us at:www.dimplex.com/customer_support. For Troubleshooting and Technical Support
• OR Toll-Free 1-888-DIMPLEX (1-888-346-7539) Monday to Friday 8:00 a.m. to 4:30 p.m. EST Please have your model number and product serial number ready. (See above)

Important Instructions

1. Read all instructions before using the electric fireplace.
2. The heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during the heater operation. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the unit.
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the unit is left operating and unattended.
4. Always unplug the electric fireplace when not in use.
5. Do not operate any unit with a damaged cord or plug, if the heater has malfunctioned, or if the electric fireplace has been dropped or damaged in any manner.
6. Return the heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
7. Do not use outdoors.
8. The electric fireplace is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container.
9. Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or the like. Arrange the cord away from the traffic area so that it will not be tripped over.
10. To disconnect the unit, turn the controls off, then remove the plug from the outlet
11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the heater.
12. To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
    • CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE
13. All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable vapors.
14. Do not modify the electric fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
15. Avoid the use of an extension cord. Extension cords may overheat and cause a risk of fire. If you must use an extension cord, the cord must be No. 14AWG minimum size and rated no less than 1875 Watts.
16. Do not burn wood or other materials in the electric fireplace.
17. Do not strike the fireplace glass.
18. Always use a certified electrician should new circuits or outlets be required.
19. Always use properly grounded, fused, and polarized outlets.
20. Disconnect all power supplies before performing any cleaning, maintenance, or relocation of the unit.
21. When transporting or storing the unit and cord, keep it in a dry place, free from excessive vibration, and store it to avoid damage.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Site Selection and Preparation

NOTE

1. A 15 Amp, 120 Volt circuit is required. A dedicated circuit is preferred but not essential in all cases.
2. A dedicated circuit will be required if, after installation, the circuit breaker trips or the fuse blows regularly when the heater is operating.
3. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

WARNING:

• Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock, or injury to persons.
• Construction and electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electric shock, and injury to persons.
• Do not attempt to wire your new outlets or circuits. To reduce the risk of fire, electric shock, or injury to persons, always use a licensed electrician.

This section provides instructions for selecting a location and preparing the site to install the fireplace into your Dimplex mantel surround.

1. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture, and high traffic.
2. For ease of electrical hook-up, you may wish to locate the fireplace near an existing outlet (refer to NO TE 1).
3. Store the fireplace in a safe dry and dust-free location.
   • NOTE: The dimensions of the fireplace are 26 inches (660.5 mm) wide X 18 ⅞ inches (479.5 mm) high X 9 ¼ inches (235 mm) deep. The fireplace does not require any additional venting.

Fireplace Installation

1. Install the fireplace assembly into the mantel. (Refer to mantel assembly instructions)
   • NOTE 1: A 15 Amp, 120 Volt circuit is required. A dedicated circuit is preferred but not essential in all cases.
   • A dedicated circuit will be required if, after installation, the circuit breaker trips or fuse blows regularly when the heater is operating.
   • Additional appliances on the same circuit may exceed the current rating of the circuit breaker.
   • IMPORTANT: If not using a Dimplex mantel, the fireplace must be installed in an enclosure with the following MINIMUM internal/opening dimensions (Figure 1).

New Wall Construction

1. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture, and high traffic.
2. Place the fireplace in the desired location to see how it will look in the room.
3. Mark the desired location on the floor and store the fireplace in a safe, dry, and dust-free location.
4. Use studs to frame an opening of 24 ½ inches (622 mm) wide X 18 ¼ inches (463.6 mm) high X 8 ⅞ inches (225.5 mm) deep. (Figure 1)
   • Option #1 – The power cord can be led from behind the trim and along the wall to an outlet near the fireplace.
   • Option #2 – A new outlet can be installed inside the new frame construction. Plug the unit into a 15 Amp/120 Volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 Watts.

Option #3 – Hardwire

1. Wire a dedicated, properly fused circuit with 120 Volt, 15 Amp rating. Allow up to eight (8) feet of service cable to connect the power supply to the junction box on the fireplace when installing after finishing the wall.
   • CAUTION: Use two conductor, non-metallic sheath cables with ground wire (3 wires total) for the incoming power supply on fireplace inserts. Use appropriate wire to meet local and national electrical codes for rated power consumption.
2. Remove the outer jacket and strip the individual conductor from the end.
3. Loosen the screw securing the junction box cover and remove the cover.
4. Take the cables out from the junction box, loosen the two wire twist nuts, and remove the cord set (Figure 2).
5. Route the power supply wire through the knockout on the supplied alternative junction box cover and secure it with a wire clamp (not supplied) (Figure 3).
6. Connect the black wire (live) from the unit to the black wire from the power supply (Figure 3).
7. Connect the white wire (neutral) from the unit to the white wire from the power supply (Figure 3).
8. Connect the green wire (ground) from the unit to the green wire from the power supply (Figure 3).
9. Place all connectors inside the unit and secure the junction box cover to the unit. Ensure that the cable clamp grips only the jacket of service cable.
   • CAUTION: Clearance for air circulation beneath the fireplace insert is provided by two (2) rubber feet.
   • CAUTION: Do not install the fireplace directly on carpet or similar surfaces which may restrict air circulation.
   • NOTE 1: If installing the fireplace in a carpeted area, place a one-piece, solid, flat surface under the fireplace insert. Ensure that both of the insert’s feet rest securely on this surface.

Operation

• A. Main ON/OFF Switch
  • The switch has two ON positions marked.
  • The “ — “ position is for manual operation.
  • In this position, the built-in remote control is bypassed.
  • The “ = “ position is for operating the unit with the provided remote control.
  • When in the remote control (“ = “) position the unit is operated with the ON and OFF buttons of the remote control.
  • When the switch is in the center “o” position the unit is off.
• B. Heater ON Switch
  • The Heat ON /OFF Switch supplies power to the heater fan and the heater element.
  • When the switch is in the ON position the heater operates if the thermostat calls for heat.
• C. Heater Thermostat Control
  • To adjust the temperature to your requirements, turn the thermostat control clockwise all the way to turn on the heater.
  • When the room reaches the desired temperature, turn the thermostat knob counterclockwise until you hear a click.
  • Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on.

Resetting The Temperature Cutoff Switch

• Should the heater overheat, an automatic cut-out will turn the fireplace off and it will not come back on without being reset. It can be reset by switching the
• Main ON /OFF switch to OFF and waiting five (5) minutes before switching the unit back on.
• CAUTION: If you need to continuously reset the heater, disconnect the power and call Dimplex customer service at 1-888-DIMPLEX (1-888-346- 7539).

Remote Operation

• The fireplace is supplied with an integrated on/off remote control
• Note: Ensure that the fireplace Main ON/OFF switch is set to the remote control setting.
• To operate, push the ON button to turn the fireplace on, and push the OFF button to turn the fireplace off.

Battery Replacement (Figure 5)
To replace the battery:

1. Slide the battery cover open on the handheld transmitter.
2. Install one 12-volt (A23) battery in the battery holder.
3. Close the battery cover.

Remote Control Initialization/ Reprogramming
If your remote control ceases to operate your fireplace, follow these steps to reinitialize the hand-held transmitter and the remote control receiver in the fireplace:

1. Place the Main ON/OFF Switch (Figure 4A) in the OFF (“O”) position.
2. Wait a minimum of five (5) seconds and then place the Main ON/OFF Switch in the Remote Control (“=”) position.
3. Within 10 seconds of changing the switch position, press the ON button located on the remote control transmitter (Figure 4).
   • This will synchronize the remote control transmitter and the fireplace receiver.
   • NOTE: You will have only 10 seconds to perform this last step. Failure to do so will result in these steps needing to be followed again.
   • If you are still experiencing issues with your remote control, contact
   • Dimplex North America Limited Customer Service at 1-888-346- 7539, or visit the Dimplex website at www.dimplex.com.

Maintenance

Light Bulb Replacement

• Allow at least five (5) minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.
• Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log ember bed exterior disappear. There are two (2) bulbs under the log set, which generate the flames and embers.

Light Bulb Requirements

• Quantity of two (2) clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60-watt rating. Example: GE 60BC or Philips 60 CTC.
• Do not exceed 60 Watts per bulb.

Helpful Hints

• It is a good idea to replace both light bulbs at one time if they are close to the end of their rated life.
• Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
• Care must be taken when removing the log set.

To Access The Lower Light Bulb Area: (Figure 6)

1. Remove the front glass assembly.
2. Pull the back edge of the plastic ember bed forward until the rear tab releases from the ledge located at the bottom of the partially reflective glass.
   • IMPORTANT: Only handle the log set by the ember bed.
   • NOTE: The log set fits tightly into the firebox, some force may be necessary to remove it.
3. Set log set in front of the fireplace.
4. Disconnect the flicker from the motor (see Figure 6).
5. Unscrew bulbs counterclockwise.
6. Insert new bulbs.
7. Reconnect the flicker to the motor.
8. Replace the log set by inserting the front edge of the log set and pushing down on the rear edge of the ember bed until it snaps into place (Figure 7).
   • NOTE: Ensure the log set is installed tightly under the back ledge to prevent light leakage.
9. Replace glass assembly.

Glass Cleaning

• The front glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the front glass may collect dust particles, these can be removed by dusting lightly with a clean dry cloth.
• To remove fingerprints or other marks, the glass can be cleaned with a damp cloth. The glass should be completely dried with a lint-free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the glass surface.

Fireplace Surface Cleaning

• To remove fingerprints or other marks, the exterior finish can be cleaned with a damp cloth with a mild detergent. The surface should be completely dried with a lint-free cloth to prevent water spots.

Two-Year Limited Warranty

• Products to which this limited warranty applies This limited warranty applies to your newly purchased Dimplex electric fireplace.
• This limited warranty applies only to purchases made in any province of Canada except for Yukon Territory, Nunavut, or Northwest Territories or in any of the 50 States of the US A (and the District of Columbia)except for Hawaii and Alaska.
• This limited warranty applies to the original purchaser of the product only and is not transferable.

Products excluded from this limited warranty

• Light bulbs are not covered by this limited warranty and are the sole responsibility of the owner/purchaser.
• Products purchased in Yukon Territory, Nunavut, Northwest Territories, Hawaii, or Alaska are not covered by this limited warranty.
• Products purchased in these States, provinces, or territories are sold AS IS without warranty or condition of any kind (including, without limitation, any implied warranties or conditions of merchantability or fitness for a particular purpose) and the entire risk of as to the quality and performance of the products is with the purchaser, and in the event of a defect the purchaser assumes the entire cost of all necessary servicing or repair.
• What does this limited warranty cover and for how long
• Products, other than fireplace surrounds (mantels) and trims, covered by this limited warranty have been tested and inspected before shipment.
• Subject to the provisions of this warranty, Dimplex warrants such products to be free from defects in material and workmanship for 2 years from the date of the first purchase of such products as follows:
  • (a) a repair or replacement warranty on  defective products or parts, including in-home services, for the first year following the date of first purchase; and
  • (b) thereafter, a replacement of parts warranty on defective products and parts (with no in-home services) for the 1 year period commencing on the first anniversary of the first purchase and ending on the second anniversary of the date of the first purchase.
• Dimplex fireplace surrounds (mantels) and trims covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Dimplex warrants such products to be free from defects in material and workmanship for 1 year from the date of first purchase of such products.
• Warranty services do not include in-home services. The limited 2-year warranty period for products other than fireplace surrounds (mantels) and trims and the limited 1-year warranty period for fireplace surrounds (mantels) and trims also applies to any implied warranties that may exist under applicable law.
• Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to the purchaser.

What this limited warranty does not cover

• This limited warranty does not apply to products that have been repaired (except by Dimplex or its authorized service representatives) or otherwise altered. This limited warranty does further not apply to defects resulting from misuse, abuse,

Warranty

• Accident, neglect, incorrect installation, improper maintenance or handling, or operation with an incorrect power source. What you must do to get service under this limited warranty
• Defects must be brought to the attention of Dimplex Technical Service by contacting Dimplex at 1-888-DIMPLEX (1-888- 346-7539), or 1367 Industrial Road, Cambridge Ontario, Canada N1R 7G8.
• Please have proof of purchase, catalog model, and serial numbers available when calling. Limited warranty service requires proof of purchase of the product.

What Dimplex will do in the event of a defect?

In the event, that a product or part covered by this limited warranty is proven to be defective in material or workmanship during (i) the 2-year limited warranty period for products other than fireplace surrounds (mantels) and trims, and (ii) the 1-year limited warranty period for surrounds (mantels) and trims, you have the following rights:

• Limited warranty service will be performed solely by dealers or service agents of Dimplex authorized to provide limited warranty services.
• For products other than surrounds (mantels) and trims) for the period ending at midnight on the first anniversary of the date of first purchase, Dimplex will in its sole discretion either repair or replace such defective product or part without charge. If Dimplex is unable to repair or replace such product or part, or if repair or replacement is not commercially practicable or cannot be timely made, Dimplex may, instead of repair or replacement, choose to refund the purchase price for such product or part. This limited warranty entitles the purchaser to on-site or in-home warranty services. Accordingly, Dimplex will be responsible for all labour and transportation costs associated with the repair or replacement of the product or part except as follows:
  • charges may be levied for travel costs incurred to travel to the purchaser’s site where the product is located in the purchaser’s site is beyond 30 miles (48 km) from the closest service depot of Dimplex’s dealer or service agent; and
  • the purchaser is solely responsible for providing clear access to all serviceable parts of the product.
• For products (other than surrounds (mantels) and trims) for the period commencing at 12:01 a.m. on the day after the first anniversary of the first purchase and ending at midnight on the second anniversary of the date of the first purchase, this limited warranty entitles the purchaser to replacement parts only without charge. If Dimplex is unable to replace such part, or if replacement is not commercially practicable or cannot be timely made, Dimplex may, in place of replacement, choose to refund the purchase price for such part. The purchaser shall not be entitled to on-site or in-home warranty services. The purchaser shall be responsible for all expenses incurred for the removal of the part and installation of the replacement part including, without limitation, all shipping costs and transportation costs to and from the authorized dealer’s or service agent’s place of business and all labor costs. Such costs shall not be the responsibility of Dimplex.
• For surrounds (mantels) and trims for the period ending at midnight on the first anniversary of the date of first purchase, Dimplex will in its sole discretion either repair or replace such defective surrounds (mantels) and trims or part thereof without charge. If Dimplex is unable to repair or replace such product or part, or if repair or replacement is not commercially practicable or cannot be timely made, Dimplex may, in place of repair or replacement, choose to refund the purchase price for such product or part. The purchaser shall not be entitled to on-site or in-house services.
• The purchaser is responsible for all expenses incurred for repair or replacement of such product or part including, without limitation, all shipping costs and transportation costs to and from the authorized dealer’s or service agent’s business and all labor costs. Such costs shall not be the responsibility of Dimplex.
• On-site or in-home services not provided under this warranty may be performed at the purchaser’s specific request and expense at Dimplex’s then-current rates for such services.

hat Dimplex and its dealers and services are also not responsible for:

• IN NO EVENT WILL DIMPLEX, OR ITS DIRECTORS, OFFICERS, OR AGENTS, BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY. WHETHER IN CON TRACT, IN TOR T, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, US E, OR INABILITY TO US E THE PRO DUCT, EVEN IF DIMPLEX OR ITS DIRECTORS , OFFICERS , OR AGENTS HAVE BEEN ADVISED OF THE POSSIBILITY OF SU CH LOSS ES, COSTS OR DAMAGES, OR IF SU CH LOSS ES, COS TS, OR DAMAGES ARE FOR ESEEABLE. IN NO EVENT WILL DIMPLEX, OR ITS OFFICERS, DIRECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT LOSS ES, COS TS, OR DAMAGES THAT EXCEED THE PUR CHASE PRICE OF THE PRO DUCT.
• SOME JURISDICTIONS DO NO T ALLOW THE EXCLUS ION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NO T APPLY TO THE PUR CHASER.
• How State and Provincial Law Apply This limited warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction.
• The provisions of the United Nations Convention on Contracts for the Sale of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty.

Replacement Parts

• Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000370500RP
• Remote Control Reciever Board. . . . . . . . . . . . . . . . . . . . . . 3000380200RP
• Flicker Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000210200RP
• Flicker Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5901110100RP
• Heater Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200491100RP
• Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2300150100RP
• Cutout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2300270100RP
• Double Lampholder Wire Harness . . . . . . . . . . . . . . . . . . . . 2500400500RP
• Heater On/Off Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800070700RP
• Three Position Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800071100RP
• Terminal Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000080100RP
• Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4100040300RP
• Partially Reflective Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5901410200RP
• Control Knob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8801080100RP
• Stainless Steel Trim Assembly . . . . . . . . . . . . . . . . . . . . . . . 1020230280RP
• Gloss Black Trim Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 1020230104RP
• Flat Black Trim Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020230359RP
• Silver Trim Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020230478RP
• Log Set Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0439970100RP
• Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0440400100RP
• Glass Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1400070100RP

CONTACT

• Dimplex North America Limited
• 1367 Industrial Road
• Cambridge ON
• Canada N1R 7G8
• © 2011 Dimplex North America Limited
• www.dimplex.com.

IMPORTANT SAFETY INFORMATION:

• Always read this manual first before attempting to install or use this fireplace.
• For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage.
• To view the full line of Dimplex products, please visit www.dimplex.com.
• 7209530100R06

References

• Electric Fireplace & Heating Solutions | Dimplex
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>