VANKYO VT11 Projector User Manual
- June 17, 2024
- VANKYO
Table of Contents
Leisure 470Pro
User Manual
Please read this manual. thoroughly before using this product and keep it for future reference.
WHAT’S INCLUDED
NOTICE
PRODUCT OVERVIEW
QUICK START
| Plug the power cord into an outlet.
---|---
| Take off the lens cover.
| Connect your device to the projector correctly.
| Press the Power Button to turn on the projector.
| Select the correct input source by pressing the button
| Adjust the kickstand accordingly.
| Adjust the keystone and focus ring to get the best image performance.
| Press the Power Button twice to turn off the projector.
PROJECTOR CONNECTION AND INPUT SOURCE
Connect your device to the projector correctly, then setect the right input source on the homepage.
-
USB Connection
-
TF Card Connection
-
HD Connection
This option is for connecting a device with an HOMI output port.
-
AV Connection
WIFI CONNECTION
Go to Homepage > Settings > Network Setting to connect the projector to your router’s WiFi.
SCREEN MIRRORING
For iOS System
Screen Mirroring Wirelessly
Step 1: Connect the projector and your mobile device to the same router’s WiFi
or directly connect your mobile device to the projector’s AP hotspot.
Tip: When you are using the projector’s AP hotspot, the content will be
mirrored via the cellular data.
Step 2: Go to Homepage and select iOS Cast to enter the interface below.
Step 3: Activate Screen Mirroring /Air Playing Mirroring in the Control Center
of your iOS device and search for the Projector.
Step 4: Select Vankyo-20x0x from the searching list. The contents on your iOS
device will be mirrored on the projection screen/Walt after a successful
connection.
Screen Mirroring via A Lightning Cable
Step 1: Go to Homepage and select iOS Cable to enter the interface below.
Step 2: Connect your mobile device to the USB Port on the projector using the
ORIGINAL lightning cable.
Step 3: Select Trust in the pop-up window of Trust This Computer?
Step 4: The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.
For Android System
To activate this function, please make sure your Android device supports
Multi-screen/Smart View/Wireless Display. Names may vary on different Android
devices.
Step 1: Go to the WiFi settings of your Android mobile device to switch on the
option of WiFi.
Note: Successful WiFi connection is not a must, but please make sure the
WiFi switch on your Android device is ON.
Step 2: Go to Homepage and select Miracast to enter the interface below.
Step 3: Activate the Multi-screen/Smart View/Wireless Display function on your
Android device and search for the Projector.
Step 4: Select Vankyo-xxxx from the searching list. The contents on your
Android device will be mirrored on the projection screen/wall after a
successful connection.
BLUETOOTH CONNECTION
-
Use as A Bluetooth Speaker
You can connect your mobile device to this projector via a Bluetooth connection and use it as Bluetooth speaker.
Step 1: Go to Homepage > Settings > BT Amplifier to make the projector ready for Bluetooth connection.
Step 2: Go to the Bluetooth setting of your mobile device to tum on the Bluetooth, then search for Vankyo-sx0 from the search list and pair the mobile device with the projector.
Tip Press the back button to exit this mode. -
Connect to An External Bluetooth Speaker
Except for the wired 3.5mm audio output port connection, you can also connect a Bluetooth speaker or Bluetooth headphones to this projector via the Bluetooth connection.
Step 1: Turn on your Bluetooth device and make it ready for a Bluetooth connection.
Step 2: Go to Homepage > Settings > System Setting > Bluetooth and press OK to enter the interface below.
Step 3: Press the Right button to turn on the Bluetooth function of the projector, then select Search device and press OK to start searching for available Bluetooth devices.
Step 4: Select your BT device and pair it with the projector.
IMPORTANT:
- Compared with the wired connection to a speaker, BT wireless connection spends more time processing digital audio data, converting said data to an audio signal, and streaming the signal.
There may be a delay or slight lag on audio due to signal interference.
Asa result, the sound on the speaker may not be in sync with the image on the projector, especially when you are using wireless screen mirroring with Wifi and BI wireless connection at the sametime.
If you are experiencing this situation, please check the follawing options to improve audio quality
- Instead of using wireless screen mirroring with WiFi and BT wireless connection at the same time, we recommend using wired screen mirroring and BT connection or using HD connection via the provided HD cable and BT connection simultaneously. If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
- Move your BT device closer to the projector.
- Keep the projector and your BT device away from other BT devices to avoid interference.
- You may be able to adjust the latency (Lip Sync) an your device which is playing the video, The way to adjust the latency varies with different devices; please consult it from the device manufacturer. 2. Due to the compatibility issue between BT speakers/headphones and the projector, few BT devices may not be paired with the projector via BT wireless connection, Please contact us at support@ivankyo.com for further assistance.
SETTINGS
-
Press the Menu button on any interface to check the PICTURE, SOUND and OPTION settings.
Tips:
1. After you select User in the option of Picture Mode, you can change the settings of the Contrast, Brightness, Color, Tint and Sharpness to adjust the image quality.
2. If you select User in the option of SOUND, you could change the settings of the Treble and Bass to adjust the sound effect.
3. when you are using the USB connection or HD connection on the projector, the option of Aspect Ratio will be activated. You can then adjust the aspect ratio of the projection image. -
Go to Homepage > Settings to connect the projector to a WiFi network, enable BT amplifier made, change language, restore the projector to factory settings, change the projection mode and adjust the image size.
PROJECTION DISTANCE & SIZE
- The recommended projection distance varies with different projection contents. Please adjust the distance between the wall screen and the projector properly a5 needed.
- Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
Display Technology | LCD | Light Source | LED |
---|---|---|---|
Resolution | Native 1920x 1080 | Input Signal | 576i/720P/1080i/1080P |
Aspect Ratio | 4:3/16:9 | Focus | Manual |
Keystone | ± 15 | Installation Type | Front/Rear/Ceiling |
Speaker | 3W/40hm | Power Supply | AC 100-240V. 50/601Iz |
Unit Dimension | 198145475mm (7.85.73 inches) | Unit Net Weight | 1kg |
(2.2Ibs)
Photo Format Supported| BMP/JPG/PNG/JPEG| Audio Format Supported|
MP3/WMA/MP2/AAC/FLAC/PCM
Video Format Supported| AVI/MP4/MKV/FLV/MOV/ RMVB/3GP/MPEG/H.264/ XVID| Ports|
HD In x 2/LISB Port x 1/Audio Out x 1/AV In x 1/
Memory Card Slot x 1
Video Format Supported for TF Card| MP4/MKV/MOV
(24FPS, 1280×720) ‘See Q7 on Page 12| Mounting Screws| 1/4″
TROUBLESHOOTING GUIDE
- The content from Hulu, Netflix, and similar services can not be mirrored or cast.
- Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or Cast. 2. What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
- Please prepare a Fire TV stick , Roku stick or Chromecast™ {not included), then connect it to the projector to watch the content. 3. Blurry Image
- Adjust focus ring/keystone.
- Projector and screen/walt must be in effective distance. 4. Remote Unresponsive
- Make sure remote points at IR receiver directly.
- Do not cover IR receiver.
- Replace the old AAA batteries with new ones. 5. Upside Down Images
- Go to Homepage > Settings > Projection Setting > Projection Mode to flip the projection image. 6. Factory Reset
- Go to Homepage > Settings > System Setting > Restore Factory Default to restore the projector to default settings. 7. TF cards only support a few video formats.
- TF card has limited decoding ability, so it only supports video formats of MP4, MKV, and MOV. For the frame rate of a video, it supports 24FPS and for the resolution, it supports1 280X720. If there is any unsupported video, it is recommended to use a U disk through the USB connection or use a computer through the HD connection.
FCC Statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can raciate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur In a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio; TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment, This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
VANKYO SUPPORT
support@ivankyo.com
www.ivankyo.com| @VankyoOfficial| VANKYO
---|---|---
https://qrs.ly/fc7wkt2|
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>