VENTION VWS-E45 Bluetooth Earbuds User Manual

VENTION VWS-E45 Bluetooth Earbuds User Manual

Introduction

The headphones combine cutting-edge technology with the finest craftsmanship for the ultimate listening experience.

Specifications

Model: NBB
Bluetooth version: Bluetooth 5.3
Material: ABS
Headphones battery capacity: 300mAh/1.11Wh
Headphone input power: 5V-300mA
Headphone charging port: USB-C

Headphone Controls

1. Power on
   Turn the power switch upwards. You hear a tone, and the status light appears blue for one second. Then, the status light blinks between blue and green alternately.

2. Bluetooth connections
   Turn on the headset when you pair the headset with a device for the first time after you bought it or after you initialize the headset (the headset has no pairing information). You hear a tone signaling, “Pairing.” The headset enters pairing mode automatically (blinks red and blue).
   •Reconnect: When powered on, the headphones try to reconnect with the most recently-connected devices.
   • The devices must be within range(10m) and powered on.
   

3. Power off
   • Manual power off
   a. Slide the power switch downwards. You hear a tone, and the status light blinks red twice.
   b. The headset will automatically power off when connected to the audio cable.
   • Auto power off
   a. The headset will automatically turn off after 5 minutes of not being connected.
   b. The headset will automatically power off when plugged into the power source for charging.

4. Music mode

5. Phone calls

6. Status light

Important safety instructions

Please read all instructions and warnings before using this product. Inappropriate use will cause damage to the product or personal safety.

1. Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment; do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
2. Improper use of the product can easily cause product damage or may endanger personal and property safety.
3. If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
4. Non-professionals are strictly forbidden to disassemble this product.
5. Use this product only with an agency-approved power supply that meets local regulatory requirements.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE 3: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 24724-NBB

Contents

Note

Please read all instructions and warnings before using this product. Inappropriate use will cause damage to the product or personal safety.

1. Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment; do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
2. Improper use of the product can easily cause product damage or may endanger personal and property safety.
3. If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
4. Non-professionals are strictly forbidden to disassemble this product.
5. Use this product only with an agency-approved power supply that meets local regulatory requirements.

For more interesting information and events, please follow us on social media platforms:

Facebook

Linkedin

Instragram

For warranty service or support, please contact Vention team:

Website: www.ventiontech.com Email: vention@ventiontech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>