CONFU K13 Hair Dryer User Manual

K13
User Manual Hair Dryer

Product Description

Product Specifications

Operating Instructions

1. Before using this product, please check if the voltage shown in the product matches the voltage in your home; and confirm that the machine is off (“0” is off, “I” is on).
2. Insert the power plug into the socket, turn on the power, and turn the switch button of the hair dryer to the “I” position.
3. The hair dryer is started at medium speed and medium temperature by default.
4. Speed button: lightly press the speed button, and you can adjust the wind speed. In the current mode, the 3-speed wind speed cycle changes, and the hair dryer is turned on by default for the medium-speed gear.
5. Temperature button: lightly press the temperature key, and you can adjust the temperature. in the current mode, the 4-speed temperature cycle changes, and the hair dryer is turned on by default for the warm wind gear.
6. Cleaning mode: In the off state, press and hold the hot / cold alternate button and turn the power switch on, the motor reverses into cleaning mode, and automatically turns off after 10 seconds.
7. Hot / Cold Alternate Button: Cold air / hot air / hot and cold cycle, three modes of alternating cycles, a new comfortable hair drying experience.
8. Use is complete: Turn off the power switch to the “0” position and unplug the power supply.

Installation and Disassembly

Installation method:
This product is equipped with attachments are magnetic adsorption parts, when using the bottom of the attachment aligned with the air outlet lightly buckle, hear a “click”, that the attachment has been fixed. Disassembly method:
Break the attachment down from the air outlet of the hair dryer and remove the attachment.
Note: Please install and remove the attachment in the off state. Do not adjust and load or unload the accessories during use to avoid burns.

Cleaning and Maintenance

Do not use paint thinner, benzene, alcohol, etc. to clean this product as it may cause malfunction, breakage and fading.
The hair dryer comes with a micro-filter that prevents very small particles (hair, hairspray, dust), etc. from entering the body and prolonging its life.
In order to achieve the best use effect, it is recommended to activate the automatic cleaning system for cleaning once after use. In addition, in order to ensure the best performance of the hair dryer, it is recommended to manually clean the filter with a brush every 7 days. When cleaning the air outlet, please make sure the product is not plugged into the power state.
Remove the nozzle, then use a cotton swab to remove the adherents on the air outlet and wipe the product with a dry cloth.When cleaning the air inlet, please ensure that the product is not plugged into the power state. Remove the air inlet hood and use a cotton swab or toothbrush to remove the adherents on the air inlet.

Matters Needing Attention

To reduce the risk of malfunction, electric shock, injury, fire, death, and damage to equipment or property, be sure to observe the following safety precautions.
Warning
Indicates a potential hazard that could result in serious injury or death.
Caution
Indicates a hazard that could result in minor injury or property damage.
The following signs are used to classify and describe the types of instructions to be followed.
This flag is used to remind the user of the prohibited operation steps
This sign is used to remind users of the operating steps that must be followed in order to operate this product safely.
Warning
Do not use when the power cord or plug is damaged or hot.
Otherwise, it may cause burns, electric shock or fire due to short circuit.
Do not use if the power plug inserted into the socket is loose.
Otherwise, it may cause burns, electric shock, or fire due to short circuit.
Do not damage, modify, bend, pull or twist the power cord. Also, do not place heavy objects on the power cord or squeeze it.
Otherwise, it may cause burns, electric shock or fire due to short circuit.
Do not use it with the power cord tied.
Otherwise, electric shock or fire may be caused.
Do not stay away when the power switch is turned on.
Otherwise, fire may be caused.
Do not connect or unplug the power plug from the power outlet when your hands are wet.
Otherwise, electric shock or fire may be caused.
Do not use with wet hands.
Otherwise, electric shock may occur or fire may result due to short circuit.
Do not use near LPG or other flammable products (e.g. volatile agents, paint thinner sprays, etc.).
Failure to do so may result in an explosion or fire.
Please do not block or insert foreign objects such as hair cards into the air outlet or air inlet.
Otherwise, scalding, electric shock or fire may be caused.
Do not place or store near bathrooms, sinks, places where there is water or other liquids with high moisture content.
Otherwise, explosion or fire may be caused.
Please do not wrap the power cord around the body and handle when storing.
Otherwise, it may lead to power disconnection, burns, electric shock or fire due to short circuit.
Do not store within the reach of children and infants.
Do not allow children and infants to play with it.
Otherwise, scalding, electric shock or fire may be caused.
Do not repair, disassemble or modify the hair dryer by yourself.
Otherwise, it may cause injury due to fire or abnormal movement. If repair is required, please contact the customer consultation service center.
Do not soak the hair dryer in water. Do not use this hair dryer when taking a bath or shower. Please do not usethis hair dryer in the bathtub, shower room, washbasin or other places with water. Do not use this hair dryer near the bathtub, shower room, washbasin or other utensils containing water.
Otherwise, electric shock may be caused.
When the hair dryer is used in the bathroom, unplug it after use;
In order to increase protection, it is recommended to install a residual current device (RCD) with rated residual working current not exceeding 30mA in the bathroom power supply electrical circuit.
Do not use this appliance near the bathtub, shower, washbasin or other utensils containing water.
The above symbols indicate
“Do not use in the bath or shower”
Warning
Please properly handle the packaging bag and power plug protective sleeve of this product, and keep them away from infants.
Otherwise, accidents such as infant asphyxia may occur.
This product should not be used by people with physical, sensory or mental disabilities, or people lacking experience and knowledge (including children). The guardian must supervise and guide the use of this product, and be responsible for the safety of users. Take care of children to ensure that they do not play with this product.
Otherwise, accidents or injuries may occur.

Note
Avoid dropping the hair dryer or causing it to be strongly impacted.
Otherwise, electric shock or fire may be caused.
During use, the air outlet and nozzle may become hot.
Please do not touch them with your hands.
Otherwise, it may cause burns.

Warm Tips

Please do not use in the state of the air inlet broken.
Otherwise, hair may be caught in the air inlet, resulting in hair damage.
Do not use on infants.
Otherwise, it may cause burns.
Please only use for blow drying and hair conditioning.
Do not use it for pets or dry shoes and clothes.
Otherwise, it may cause scald or fire.
Please keep a distance of more than 3cm between the air outlet and the hair.
Otherwise, the hair may be burnt.

Reminder
This product is used for the first time, and it is normal if there is a trace of smoke. This is because the insulating material in the heating device will be further dried, and the insulation performance will be further improved. Please feel free to use it.
When the switch has sparks, it is a normal arc phenomenon and can be used normally.
Please clean the air inlet and outlet regularly to ensure smooth air inlet and outlet and prolong the service life of the hair dryer.
Please clean it at least — times a month. When cleaning, be sure to turn off the power and unplug the power plug from the socket.
During use, be careful not to let the hair get involved in the air inlet, and not to insert foreign objects into the air outlet and air inlet, otherwise the instrument may be damaged or electric shock may occur.

Possible fault analysis And treatment methods

• No response when power is on
  Cause 1: Please check whether the power cord plug is plugged in properly.
  Solution: Plug in the plug.
  Cause 2: The power line is broken, the switch is not connected, and the temperature control is in poor contact Handling method: ask professional personnel for maintenance.

• The body temperature is too high
  Cause 1: The air inlet is blocked by hair and other sundries.
  Treatment method: Please clean the air inlet in time and keep it clean and unobstructed.
  Cause 2: The motor speed is obviously reduced, and the internal heating wire rubs red.
  Treatment: Stop using immediately and ask professional personnel to repair.

• Abnormal collision sound during shaking or sharp friction sound during startup
  Failure cause: the internal support is broken or damaged.
  Treatment: Stop using immediately and ask professional personnel to repair.

• Odor during initial startup
  Fault cause: It belongs to normal use and can disappear after use.
  Handling method: It can be used normally.

*Note: Guangdong Huanengda Electrical Appliances Co. Ltd. reserves the right to finally explain the items that can be handled by itself but still can not be eliminated after being handled according to the handling method.

Warranty Provisions

1. This product is within 1 year from the date of purchase, under normal use, such as quality problems, our company is responsible for a free warranty.
2. The following conditions are not under warranty:
   1 Failure or damage caused by not using according to the normal use method and precauons.
   2 Failure or damage caused by human factors (such as users holding this hair dryer falling to the ground, water or disassembling by themselves, etc., which caused the failure or damage).
   3 Force majeure factors (e.g., failure or damage caused by natural disasters such as fires, earthquakes, etc.).
   4 Malfunction or damage caused by abnormal operating voltage.

Guangdong Huanengda Electrical Appliances Co. Ltd.
Address: West side of Dongsanzhi Road, Airport Economic Zone, Jieyang City Guangdong
http://en.kangfuchina.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>