FULGIVATE XY-12 Wireless Earbuds Pro User Manual
- June 15, 2024
- FULGIVATE
Table of Contents
FULGIVATE XY-12 Wireless Earbuds Pro
Specifications
- Model: XY-12
- Bluetooth version: V5.3+EDR
- Earbud battery: 40mAh
- Charging case battery: 400mAh
- Power input: 5V
- Product weight: about 37g
- Working time: 3.5 hours
- Working voltage: 3.3V-4.2V
- Charging time: 80 minutes
- Speaker impedance: F6/32
- Frequency response: 20-20KHZ
- Transmission distance: over 10 meters
Product Usage Instructions
Power On
- Automatically: Open the charging case, and the earbuds will automatically turn on and start pairing with your Bluetooth-enabled device.
- Manually: If the earbuds are not in the charging case, press and hold each earbud individually for 5 seconds to power on.
Power Off
- Automatically (Case 1): Put the earbuds back into the charging case and close the case. They will disconnect and power off automatically.
- Automatically (Case 2): If the earbuds are not connected to your device for over 5 minutes, they will power off automatically.
- Manually: If the earbuds are not in the charging case, press and hold each earbud individually for 5 seconds to power off.
Connection with Smart Phone
- Step 1: Turn on Bluetooth on your smartphone.
- Step 2: Take out the earbuds from the charging case.
- Step 3: Find the earbuds named “TWS~” on your smart phone.
- Step 4: Click on the earbuds to connect.
Common Operation of Touch Control The touch control on the earbuds can be used for various operations. Please refer to the user manual for specific instructions on how to perform different functions.
Indicator Working Status
| Earbuds Work Status | Charging | Fully Charged | Connected |
|---|---|---|---|
| Earbuds Light Status | Flashing Red | Lights Out | Lights Out |
| Charging Case Work Status | USB-5V Charging | ||
| Charging Case Light Status | Flashing White | Earbuds Fully Charged | Lights Out |
| Low Power Status | |||
| Earbuds Light Status | One Light Flashing White |
Precautions for Use
- The earphones should be stored in a dry and ventilated environment, and avoid contact with oil, water vapor, and distilled water to maintain product performance.
- Avoid using harsh or corrosive organic solvents for cleaning.
- Pay attention to the influence of the use environment on the earbuds.
- To ensure a smooth connection, it is recommended to keep the distance between the cell phone and the earbuds within 10 meters.
- If the earbuds cannot be connected or the communication is not smooth, please do not disassemble the headset and accessories without permission, as it may void the warranty service.
- When charging the earbuds, please use the provided charging cable or other compliant charging cables and chargers.
- Ensure that the earbuds have sufficient power for normal use.
FAQ
-
Q: What is the Bluetooth version of the XY-12 earbuds?
A: The XY-12 earbuds have Bluetooth version V5.3+EDR. -
Q: How long does it take to fully charge the earbuds?
A: It takes approximately 80 minutes to fully charge the earbuds. -
Q: What is the working time of the earbuds on a single charge?
A: The earbuds have a working time of 3.5 hours on a single charge. -
Q: Can I use the earbuds while they are charging?
A: No, it is not recommended to use the earbuds while they are charging.
Products Diagram
Specifications
- Model: XY-12
- Bluetooth version: V5.3+EDR
- Earbud battery: 40mAh
- Charging case battery: 400mAh
- Power input: 5v
- Product weight: about 37g
- Working time: 3.5 hours
- Working voltage: 3.3v-4.2v
- Charging time: 80 minutes
- Speaker impedance: F6/32Ω
- Frequency response: 20-20KHZ
- Transmission distance: over10 meters
Package Content
- Wireless Earbuds X2
- Charging Case X1
- Type-C Charging Cable X1
- Ear Caps X6
- User Manual X1
How To Use
Power On
-
Automatically
Open the charging case, the earbuds will automatically turn on and start to pair your Bluetooth-enabled device. -
Manually
If the earbuds are not in the charging case, press and hold the earbuds individually for 5 seconds to power on.
Turn Off
- Automatically
- Case 1: Put the earbuds back into charging case and close the case, they will disconnect & power off automatically.
- Case 2: lf the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically.
- Manually
If the earbuds are not in the charging case, press and hold the earbuds individually for 5 seconds to power off.
Connection with Smart Phone
- Step 1: Turn on Bluetooth on your smartphone.
- Step 2: Take out the earbuds from the charging case.
- Step 3: Find out earbuds name【TWS】on your smartphone. Step 4: Click it to connect.
Common Operation of Touch Control
- Incoming Call/ Reject Call:
- Tap once to answer/end the call.
- Press and hold for 2s to refuse incoming call.
- Play/Pause
- Tap once to play or pause the music.
- Volume +/-
- Tap the left earbud 3 times to increase the volume.
- Tap the right earbud 3 times to decrease the volume. Previous/Next Song
- Tap the left earbud twice to back to previous song.
- Tap the right earbud twice to jump to next song.
- Voice Assistant
- Press and hold on either left or right earbud for 3s to wake up.
Indicator working status
Precautions for use
- The earphones should be stored in a dry and ventilated environment, and avoid contact with oil, water vapor, and distilled water, so as not to affect product performance.
- Avoid using harsh, or corrosive organic solvents for cleaning.
- Pay attention to the influence of the use environment on the earbuds. To ensure a smooth connection, it is recommended that the distance between the cell phone and the earbuds be within 10 meters.
- If the earbuds cannot be connected or the communication is not smooth, please do not disassemble the headset and accessories without permission, otherwise the warranty service cannot be provided.
- When charging the earbuds, please use the charging cable we provide or other compliant charging cables and chargers.
- To ensure the normal use of your earbuds, please make sure that the earbuds have sufficient power.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, under Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Readjust or place the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>