NITEK FRS311000S00 Fiber Optic Video Transmission Systems Instruction Manual
- June 17, 2024
- NITEK
Table of Contents
NITEK FRS311000S00 Fiber Optic Video Transmission Systems
Models
- FRS344000S00 Quad Receiver
- FRS322000S00 Dual Receiver
- FRS311000S00 Single Receiver
1, 2 and 4 Camera Stand-Alone Receiver
- Note: This installation should be made by a qualified service person and conform with local codes.
- Reduce the risk of fire or electrical shock do not expose this product to rain or moisture.
Specifications
Video Connection
- Connector 75 ohm BNC Socket
- Output Impedance 75 ohm terminated
- Output Level 1 volt p-p nominal
- Frequency Response 10Hz to 5.75MHz
Optical Connection
- Connector SC Style
- Path Loss 20dB
- No Customer adjustments are available within the unit.
- Wavelength 1310/1550nm
Power Connection
- Supply 12 to 24VDC @ 300mA
Power/Video/Opto LED
Colour | Description |
---|---|
Green | System Normal |
Yellow | (RX) The link is working, No video at TX |
Red | (TX) Power on, No video into TX (RX) Power on, No opto into RX |
Installation Instructions
- The fibre receiver is designed to be mounted using the included bracket.
- Always allow for a bend radius of optical and electrical cables when installed.
- There are no adjustments required when using this product.
Typical Installation – Stand Alone Receiver
Video Out
Power/Video/Opto LED
Colour | Description |
---|---|
Green | System Normal |
Yellow | (RX) The link is working, No video at TX |
Red | (TX) Power on, No video into TX (RX) Power on, No opto into RX |
Service Information
There are no user-serviceable parts inside the unit. If service is required to this unit please contact NITEK Technical Support at 800-528-4343.
- 5410 Newport Drive, Suite 24 Rolling Meadows, IL 60008
- PHONE 847-259-8900
- FAX 847-259-1300
- WWW.NITEK.NET.
Read User Manual Online (PDF format)
Loading......