Shenzhen BroadRadio RFID Technology Co LTD BRC-04BL UHF Channel Access Control System User Manual
- June 1, 2024
- Shenzhen BroadRadio RFID Technology Co LTD
Table of Contents
Shenzhen BroadRadio RFID Technology Co LTD BRC-04BL UHF Channel Access
Control System
Product Information
- Specifications:
- Size: Not specified
- Weight: 13KG (per pcs)
- Frequency: 902MHz – 928MHz
- Protocol: ISO 18000-6C
- Operating Temperature: -20°C to 50°C
- Storage Temperature: -30°C to 70°C
- Ambient Humidity: 5% – 95% RH (no condensation)
- Power Supply: Not specified
- Power Consumption: Approx. 45W
- Interface: RS-232(DB9), RJ45
- Recommended Width per Channel: 0.8 – 1.5m (maximum 2.2m)
- Applications:
- Suitable for all kinds of logistics, warehouses, libraries, archives, and personnel work attendance applications.
- Manufacturer’s Information:
- Manufacturer’s Name: Shenzhen Broadradio RFID Technology Co., Ltd
- Product Name: UHF RFID portal reader
Product Usage Instructions
- Installation:
- Ensure the system components are unpacked and undamaged.
- Set up the rack and narrow beam antennas according to the recommended width per channel.
- Connect the control panel, power module, read-write module, RS232, Ethernet ports, exchange board, RF feeder, and infrared components as per the manufacturer’s instructions.
- Operation:
- Power on the system and ensure all components are functioning correctly.
- Place RFID tags within the access control area defined by the antenna’s narrow beam design.
- Use the provided interface (RS232 or RJ45) to connect to a software platform for control and monitoring.
FAQs
- What is the maximum distance for placing RFID-safe doors?
- The system supports a maximum distance of 2.2m for placing RFID-safe doors.
- Can the system be used for personnel work attendance applications?
- Yes, the system is suitable for personnel work attendance applications among other use cases like logistics and warehouse management.
INTRODUCTION
- BRC-04BL UHF channel access control system supports the EPC C1G2 (ISO18000-6c) protocol.
- It internally integrates high gain antennas, a control module and a high reading/writing speed reader which is based on ImpinjR2000.
- This system has high-speed read tag performance and good reading/writing regional control ability, provides standard RS232 or RJ45 interface, conveniently connected to the software platform.
Product Features
- Independent intellectual property design
- Support server mode to achieve multi-channel control
- Support EPC C1 G2（ISO18000-6C）protocol
- Frequency 902~928MHz
- Output power less than 30dbm（adjustable）
- Good performance in multi-label reading, a missing-read rate lower than 1% under Infrared trigger mode
- Specially designed antenna, horizontal narrow beam design， accurate access control area, no blind spot
- Alarm Lamp and buzzer embedded, high sensitivity, safe and reliable
- Wider RFID safe door placing distance, maximum 2.2m
- Motion direction judgment optional (by infrared diode pair)
- LED display optional for showing label numbers
- The new label reading prompt function optional
- The burglar alarm function optional
- Fashion appearance, easy assembly
Product Specifications
Product Specifications
Size:| 1371×370×69mm (per pcs)
Weight:| 13KG(per pcs)
Frequency:| 902MHz～928MHz
Protocol：| ISO 18000-6C
---|---
Operating Temperature：| -20℃～50℃
---|---
Storage Temperature：| -30℃～70℃
Ambient humidity：| 5%～95%RH no condensation
Power Supply：| AC 220V±10% 47～63 Hz
Power Consumption：| approx. 45W
Interface：| RS-232(DB9), RJ45
Recommended width per channel:| 0.8～1.5m(maximum 2.2m)
Access Control
Access Control Components (N channels)
- Rack N+1 pcs (N channels)
- 9dBic narrow beam antennas 4*N pcs
- Control panel and power module ≥N/2 pcs
- Read-write module N pcs
- RS232 serial port N pcs
- Ethernet port N pcs
- Exchange board ＞N ports
- RF feeder 4*N pcs
- Infrared radiation 2*N sets
- Infrared connector 2*N sets
Applications
Suitable for all kinds of logistics, warehouse, library, archives and personnel work attendance applications.
- Manufacturer’s Name: Shenzhen Broadradio RFID Technology Co., Ltd
- Product name: UHF RFID portal reader
- Model number: BRC-04BL, BRC-04BL Pro, BRC-04C, BRC-04CT, BRC-04F,
- BRC-04FL, BRC-04E, BRC-04L, BRC-04H, BRC-08H 10RS-1 Operating
- Temperature: -20° C to 50° C
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
FCC
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna. Shenzhen Broadradio RFID Technology Co., Ltd is a high-tech enterprise specialized in research & development, production and sales of RFID antenna and RFID tags, “Demands lead application, Applications drive products”, integrates technological innovation into products instantly, and provides our clients with a full range of complete RFID (field) solutions including antenna and tag design. For any inquiry, please contact us at lyh@brrfid.com. www.brrfid.om.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>