Whirlpool WGD8700E Steam Dryer Instruction Manual

June 17, 2024
Whirlpool

Inlet Hose Connection Instructions for Steam Dryers

INSTALLATION REQUIREMENTS

TOOLS AND PARTS
Gather the required tools and parts before starting installation. The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.Whirlpool WGD8700E Steam Dryer - toolsYour installation may require additional parts. To order, please contact the dealer from whom you purchased your dryer or an authorized service company.

CONNECT INLET HOSES

  1. Turn cold water faucet off and remove washer inlet hose.

  2.  Remove old rubber washer from inlet hose and replace with new rubber washer provided. Inspect hoses to be sure rubber washers are in place.

  3.  Attach 2′ (0.6 m) inlet hose to cold water faucet. Screw on coupling by hand until it is seated on faucet.

  4. Using pliers, tighten the couplings with an additional two-thirds turn.
    NOTE: Do not overtighten. Damage to the coupling can result.

  5. Attach “Y” connector to the end of small hose. Screw on coupling by hand until it is seated on connector.

  6. Attach dryer 5 ft (1.5 m) inlet hose ends to the “Y” connector. Attach washer cold inlet hose to other side of “Y” connector. Screw on coupling by hand until it is seated on connector. Using pliers, tighten the couplings an additional two-thirds turn.
    NOTE: Do not overtighten. Damage to the coupling can result.Whirlpool
WGD8700E Steam Dryer - overtighten

  7. Using pliers, tighten the couplings an additional two-thirds turn.
    NOTE: Do not overtighten. Damage to the coupling can result.

  8.  Attach other end of 5′ (1.5 m) inlet hose to fill valve at bottom or top of dryer back panel (depending on model). Screw on coupling by hand until it is seated on fill valve connector.Whirlpool WGD8700E Steam Dryer - Damage

  9. Using pliers, tighten the couplings an additional two-thirds turn.
    NOTE: Do not overtighten. Damage to the coupling can result.

  10. Check that the water faucets are on.

  11. Check for leaks around “Y” connector, faucet, and hoses.

W10701405A
©2014 Whirlpool Corporation
All rights reserved.
Printed in U.S.A.

Documents / Resources

| Whirlpool WGD8700E Steam Dryer [pdf] Instruction Manual
WGD8700E Steam Dryer, WGD8700E, Steam Dryer
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Whirlpool User Manuals

Related Manuals