Outwell 651247 Epsilon Bulb Set Instruction Manual

Table of Contents

Outwell-651247-Epsilon-Bulb-Set-product

Specifications

Model : 651247 / LB-003 (EPSILON BULB SET)

Installation

Place the lamp body (2) on a stable surface.
Connect the USB plug (4) to a reliable power source with a USB socket (5).
Adjust the hanging point (8) according to your preference, ensuring the lamp is securely suspended.

Operation

To turn the lamp on or off, use the control button (6). Press the button once to turn the lamp on and press it again to turn it off.

Dimming the Lamp

To dim the lamp, connect it to any 5V USB power source by plugging in the USB plug (4) into the USB socket (5) on the lamp body (2).

Light Source Removal

Note : The light source is not replaceable. The following instructions are for market surveillance authorities or disposal purposes only.

To remove the light source, first, remove the lamp lens (1) by hand. A twisting motion may help.
Using a pick, pry out the PCB with LEDs.
Cut the necessary wires to remove the required components for testing.

Lamp Disassembly for Component Disposal:

Note: Disassemble the lamp only when it has reached the end of its usable life.

FAQ

Q1: Can I replace the light source in the lamp?
- A1 : No, the light source is not replaceable. Introducing weak points in the construction by replacing the light source may reduce the lifetime of the product.
Q2: How do I dim the lamp?
- A2 : To dim the lamp, connect it to any 5V USB power source by plugging in the USB plug (4) into the USB socket (5) on the lamp body (2).
Q3: How do I dispose of the lamp components?
- A3: When the lamp has reached the end of its usable life, follow the instructions provided in section 5 for lamp disassembly and component disposal. Dispose of electronics and remaining components according to local regulations.

Press the button on the control (6.) to turn on or off the lamp(s)
Press and hold the button to dim the lamp(s).
Use of the lamp
The lamp is powered by 5V DC from any 5V USB power outlet.
Connect the USB plug (7). to a reliable power source.
Connect the second lamp’s USB plug to the USB socket on the first lamp. Connect the third lamp to the second lamp in the same way.
Further lamps can be chained, by connecting them to the USB sockets (5.) on the lamp bodies (2.)
A lamp can be cleaned with a damp rag
Do not use corrosive liquids to clean the lamp.
Do not stare into the light source.

Light source: LED

This product contains a light source of energy efficiency class G.
The light source is not replaceable. This would introduce weak points in the construction, that could reduce the lifetime of the product.

Instruction for removal of the light source by market surveillance authorities

Outwell-651247-Epsilon-Bulb-Set-fig1

Remove lamp lens (1.) by hand. A twisting motion will help.
Pry out the PCB with LEDs with a pick
Cut needed wires to remove the required components for testing
- Instruction for disassembly of lamp for disposal of components when the lamp has reached the end of its usable life
- See steps 1-2 above
Cut wires and pry out LEDs on the circuit board with a pick. Dispose of electronics according to local regulations
Dispose of remaining components according to local regulations