ZZB ZB10 10-Inch Android 10 Tablets User Guide

ZZB ZB10 10-Inch Android 10 Tablets User Guide

****

Please read this instruction throughly before using this product and keep it for future reference.

FUNCTION OVERVIEW

1. USB-C Port
2. Memory Card Slot
3. Volume +
4. Volume –
5. Power On/Off
6. Reset
7. Microphone
8. Front-facing Camera
9. Headphone Jack
10. Speakers
11. Rear Camera

Google, Android, Google Play and other marks are trademarks of Google LLC.

GETTING STARTED

Power On/Off

• Press and hold the power button for 2-3s to turn on your tablet. Select your language and set up your tablet following the start guide.
• Press and hold the power button for 2s, then release it. It will show Power off, Restart and Screenshot on the screen. Tap Power off to turn off the tablet.
• Press and hold the power button for 7-8s to do a forced reboot when it’s frozen.

Battery

• A rechargeable Li-ion battery is installed in the tablet.
• DO NOT attempt to replace the tablet battery by yourself because you may damage the battery, which might cause overheating, fire or injury.
• DO NOT dispose of tablet in a fire.
• DO NOT expose the tablet battery to any heat source, direct sunlight or high temperature.
• Only use the ORIGINAL power adapter provided by us to charge the tablet battery. We suggest you drain the battery completely once a month if only use your tablet occasionally.
• The Li-ion battery in your tablet should be serviced or recycled by an authorized service provider, and must be recycled or disposed of separately from household waste.
• Dispose of battery according to your local environmental laws and regulations.

Sleep Mode Simply press the power button once to switch the tablet to the Sleep Mode when the tablet is ON; press again to wake it up. Tip: Go to Settings > Display > Screen timeout to set the time of entering the Sleep Mode. Screenshot

• Press and hold the Volume- button and the Power On/Off button together to capture a picture.
• Press and hold the power button for 2s, then release it. It will show Power off, Restart and Screenshot on the screen. Tap Screenshot to capture a screenshot.

HOME SCREEN

Icon on the Bottom Menu

1. Back
2. Home Screen
3. Recent Activities

Home Settings, Widgets and Wallpapers Tap and hold the empty section of a Home screen, Home settings, Widgets and Wallpapers will be displayed.

• Tap Home Settings to enable/disable Add icon to Home screen. This is applicable to the new Apps installed from Play Store. Tap Home Screen loop to allow continuous Home Screens swiping/sliding; tap Pull down action to select the action when you swipe downward on the Home Screen, and more.
• Tap Widgets, touch and hold any application (e.g. Clock), then slide and add it to a Home screen. Remove it by sliding it to X Remove. •
• Tap Wallpapers to change the current wallpaper of the tablet from the default wallpapers or your photos.

SETTING BASIC

Quick Settings Swipe down from the top of the screen to access Quick Settings. : Wifi. Tap to connect/disconnect to a wireless network : Bluetooth. Enable/disable the Bluetooth of the tablet : Do Not Disturb. Block sound after enabling this function :Auto- rotate. Turn on/off the Auto-rotate of the screen : Smart saving mode. Tap to choose the power setting you prefer to save the battery time : Airplane Mode. Turn on/off all the network connectivity : Eye comfort. Enable/disable the eye protection mode : Read mode. The screen will be black and white after enabling this option : Location. Enable/disable location access Tap the icon to change the options in the Quick Settings. Long press each icon to enter the interface of its detailed settings. More Settings Swipe down from the top of the screen, then tap the icon to enter the detailed setting nterface. Or, tap the Settings App on the Home screen to enter. Network & Internet

• Connect to any working Wifi
• Enable/disable the Airplane Mode
• Add VPN connections and more

Connected devices

• Turn on/off Bluetooth
• Pair with Bluetooth devices and check the paired devices
• Check the received files from other devices via bluetooth connection * Add and check printers
• Check the connection status of the cast devices and more

Apps & notifications

• Check the Apps recently opened
• Check all the Apps on the tablet
• Set the App permissions
• Uninstall the third-party Apps
• Adjust App notification settings
• Clear the cache of the Apps
• Set default apps
• Check the screen time for Apps and more

Battery

• Display or hide the remaining power as a percentage
• Enable/disable Battery percentage and Battery Manager
• Set Power saving optimization
• Manage the battery optimization for apps
• Check the time for Last full charge and Screen usage since full charge

Display

• Adjust the screen brightness ‘ Turn on/off Eye comfort
• Change the wallpaper
• Enable/disable the Dark theme
• Adjust the time of entering the sleep mode
• Turn on/off the auto-rotation of the screen
• Adjust the font size and display size
• Set a screen saver and more

Scheduled power on/off

• Set the time and days of the week for the tablet to automatically turn on/off

Sound

• Set sound level for Media, Alarm and Notification
• Enable/disable Do Not Disturb to mute sound and stop vibration
• Set default notification sound and alarm sound
• Enable/disable Screen locking sounds, Charging sounds and Touch sounds

Storage

• View and manage your storage space

Privacy

• Set app permissions
• Set to show/hide the password when input a password
• Set the Lock screen preferences
• Add an account and autofill service from google and more

Location

• Turn on/off the location services for specific Apps
• Set apps that have access to location
• Enable/disable Wifi and Bluetooth scanning and more

Security

• Check the security status
• Set screen lock pattern, e.g. Password, PIN, Swipe etc.
• Enable Face unlock to unlock screen by your face
• Choose a Smart Lock to keep the device unlocked if you preset a lock pattern
• Allow the ad min apps to Find My Device and lock or erase a lost device and more

Accounts Add and manage the user accounts on your tablet Accessibility For vision and hearing impaired users, manage settings for SCREEN READERS, DISPLAY, INTERACTION CONTROLS, AUDIO & ON-SCREEN TEXT and EXPERIMENTAL Digital Wellbeing & parental controls

• Check your app usage based on Screen time, Notifications received, or Times opened from Dashboard
• Manage the related notification settings to reduce interruptions
• Set up Parental controls to help your kids balance the and more

Google Set the preferences for Google” related services System

• Set Language Tap Languages & input > Languages > +Add a langua adding, hold and slide the = to the top to change language
• Set the date and time
• Turn on/off the Back up to Google Drive
• Restore factory setting Tap Reset options > Erase all data (factory reset) to store the factory setting
• Check and update the tablet’s system

About tablet Check the detailed information about the tablet

NETWORK CONNECTION

Wifi Connection Go to network settings from the Settings App or by long pressing the Wifi icon in Quick Settings.

1. Tap Network & internet and turn on the Wifi. All the Wifi connections available will be listed.
2. Select your Wifi and input the correct password.

Bluetooth Pairing Launch the App Settings and go to Connected devices, or long press the Bluetooth icon in Quick Settings.

1. Tap +Pair new device to enter the scanning interface. Devices available will be displayed after a few seconds.
2. Tap the desired device to get a paring code and click PAIR on both devices. The automatic connection is applied to some devices.

APP MANAGEMENT

App Download and Installation

1. Tap and open Play Store on the Home screen.
2. Log into your google account, search and download the App you need.

App Management Move the App Tap and hold the App, then slide it to a desired screen. Remove the App from the Home screen Touch and hold the App, then slide to X Remove to remove it from your Home screen. Uninstall the App Touch and hold the App, then slide to the Uninstall to uninstall the App. Clear the Cache of the App

1. Go to Settings > Apps & notifications.
2. Select an App > Storage & cache > CLEAR CACHE to clear the cache.

INTERNET NAVIGATION

Please make sure the tablet is connected to a working Wifi network before navigating the Internet. You may use the pre-installed Chrome browser or use another browser downloaded from Play Store.

MULTIMEDIA

Connecting to a Computer 1. Connect your tablet to the computer with a USB cable. 2. Media device(MTP) is the default setting. Go to your computer and find your tablet 2610 to transfer files between your tablet and computer. Tips: Go to Quick Settings, tap Android System USB file transfer turned on

Tap for more options > USB computer connection to select the option preferred.

• Select Charge Only to charge your tablet.
• Select Camera(PTP) to transfer photos between the devices.
• Select MIDI to play MIDI instruments on the tablet.

Connecting to an External Device

1. Install a memory card (up to 128GB) into the memory card slot when the tablet is off.
2. Turn on the tablet, then go to Quick Setting and tap to set up.
3. Set the memory card as a portable storage by selecting portable storage. Enter memory card storage to move files between the card and tablet.

The tablet doesn’t power on.

• Reboot your tablet after charging for more than 30 minutes.
• Press the power button to check if the tablet is in the Sleep Mode.
• Press and hold the power button for 7-8s to reboot it.

The tablet doesn’t charge.

• Make sure the USB cable is properly plugged into the charging port.
• Try another compatible USB cable and adapter.

Error message occurs during the operation.

• Uninstall the App with the error message, then download and install again.
• Insert the pin into the Reset Hole to power off the tablet, then power on the tablet to try again

The tablet cannot be detected by the computer.

• Make sure the tablet is powered on.
• Try another USB cable.
• Try another USB port on the computer.
• Instead of Charge only, choose Media device(MTP) or Camera(PTP) when connecting the tablet to the computer.

The tablet cannot connect to the Wifi.

• Make sure the Wifi in your tablet is ON.
• Make sure you input the correct password when connecting the Wifi. Restart the router.
• Make sure there is no filter setting or device connection limitation in the setting of the router.
• Forget the current Wifi, reset the router and connect the Wifi again.

The storage space of the tablet is not enough.

• Delete the Apps you don’t use.
• Clear the cache of the Apps regularly.
• Install a memory card to expand the storage.

The tablet comes with scratches on the screen.

• Check if the scratches are on the film. If yes, please remove the film.

The screen is unresponsive.

• Check if the screen is dusty or greasy. If yes, please gently wipe the screen with a cloth to clean it.

The font size is too small to read.

• Please go to Settings = Display > Advanced > Font Size to adjust the text size.

How to use your voice to search a fact?

• Tap the microphone icon on Google Search bar, tell the tablet what you want to know and it will show you the search results.

FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAR tests are conducted using standard operating positions accepted by the FCC with the tablet transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the Tablet while operating can be well below the maximum value. Before a new model Tablet is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each Tablet are performed in positions and locations as required by the FCC. For body worn operation, this model Tablet has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 5mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISEDC Requirements This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance. Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS  The symbol indicates DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. This product can be used across EU member states. The device complies with RF specifications when the device used at 5mm from your body. EU Compliance Statement: Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://doc.vantop.com/. Notes:

1. High Sound Pressure
2. Hearing Damage Risk
3. Do not listen at high volume levels for long periods.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Statement The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.

FAQS

Can I download YouTube app on this tablet ?

yes and at least for me works perfect

WHAT IS otg enabled?

Yes

Does this tablet have an hd minor hdmi mini port?

no, it didn’t have that port

Does it take charge with qi charger?

It is equipped with a 5V12A charger and a TYPE-C charging cable.

Can a tablet be used as a telephone cell phone?

no

Hello I received this wonderful tablet as a gift for Christmas and for one there was no instructions in the Box for two it was already locked?

yes it already comes with one

Who is the seller of a zzb 10 in tablet?

It’s from China and sold by Amazon.

I am having problem connecting to wifi. Any solution. Or return it?

If you are having trouble connecting to wifi after doing the correct settings to accsess the wifi then return it.

Does this tablet record?

You will need recording software installed on your tablet to be able to record. So yes it does record.
By broot100

Does this come with a screen protector pre installed?

it already comes with one

How do I insert the SD card in my zzb tablet

On the left side of the ZZB tablet use your finger nail to flip open the long thin cover then there is the slot to put your TF card in.

How do I insert the SD card in my zzb tablet

Yes the tablet has a headphone jack on the top left hand corner.

Does this tablet has Headphone jack?

The manual is on the desktop of the tablet system. After the tablet is turned on, a file icon of the manual can be seen.

can you run netflix and hbo max on this tablet?

No it’s to slow

Why does ths tablet have no reviews?

They must of taken them down tablet is not worth buy. It run slow.

What screen protector is compatible with this?

ZZB 2 Pack ZZB Screen Protector for ZZB Tablet, HD Anti-Scratch Tempered Glass Tablet Protective Film for ZB10 and ZB20 1…
ZZB 2 Pack ZZB Screen Protector for ZZB Tablet, HD Anti-Scratch Tempered Glass Tablet Protective Film for ZB10 and ZB20 10.1IN Tablets, 9H Hardness, No Bubble, Easy to Apply.

VIDEO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>