NORTHERN LIGHTS AC6926 Dream Auroar Projector User Manual
- June 9, 2024
- NORTHERN LIGHTS
Table of Contents
NORTHERN LIGHTS AC6926 Dream Auroar Projector
Unpacking inspection
Thank you for purchasing our product, please read the instruction manual carefully before use. The instruction manual contains necessary safety recommendations and user instructions. Please operate in accordance with the instruction manual to avoid damage to the product due to misoperation. When you receive the product, please check whether the product is damaged.
Accessories description
KEY DESCRIPTION
Remote control button description
PRODUCT PARAMETERS
- Single point star power : less than 1MW
- Power consumption : 7-10W
- LED light source : Aurora 14W Moon 13W
- Power input : 100-240V AC50-60HZ USB DCSV/200OmA
- Working temperature : -4°F ~104°F (-20°C 40°C)
- Projection area : 215 ~ 861 square feet (20 ~ 80m)
(The star is harmful to the eyes, please do not look directly)
statement
This product has undergone comprehensive and rigorous testing before leaving the factory, and users should strictly follow the warnings and instructions. Incorrect use will cause damage to the product, which is not cOvered by our company’s warranty. Strictly follow this operating instruction and do not disassemble the host and accessories. This product has a 4-hour automatic shutdown function, can work continuously for 4 hours and automatically shut down. When the product is connected to the power source, it can memorize the last setting, and turn it on again to keep the same settings as before the last shutdown; if the power is disconnected, the factory settings will be restored. (Except for timing, each time you turn on the machine, it will be turned off after 4 hours of scheduled work)
Bluetooth connection
After pressing the lamp body or remote control Bluetooth button, it prompts “Bluetooth mode”, Turn on the Bluetooth of the mobile phone, search for the Bluetooth model “AC6926”, select the connection, and “Bluetooth connection” will be prompted after the connection is successfull
Warning:
- Do not let children operate this product alone. Please refer to the safety instructions before operation.
- This product is suitable for indoor/night/dark environment, if it is outdoor/daytime/strong light, the effect of the product is not so good.
- The waterproof grade is IP20, which is suitable for dry environments. Please avoid using in humid environments and avoid water ingress, otherwise it may cause the lamp body to burn out.
- The minimum and maximum ambient temperature to maintain the normal and stable operation of the product are-20°C and 40°C respectively. If the temperature is too low, the laser may not light up.
- Please use an adapter that meets the requirements of this product. Please use a DC 5V/2A power adapter.
- If the current is too small, the lamp body will not work normally; if the current exceeds the range, please use a regulator device, otherwise it will affect its service life.
- The remote control needs to add a AAA battery, the battery is purchased by yourself.
- Pay attention to the drop, otherwise the laser module may be damaged, and the laser will not turn on.