PYLE PMP78RBIN Lightweight and Portable Square Megaphone User Guide

June 17, 2024
Pyle

PYLE PMP78RBIN Lightweight and Portable Square Megaphone

PYLE-PMP78RBIN-Lightweight-and-Portable-Square-Megaphone-
PRODUCT

Product Information

Specifications

  • Power source: 8 UM-2 cells or 1 12V rechargeable battery
  • Talk operation: Toggle switch to MIC, press power key on MIC to speak
  • Siren/Whistle operation: Short press SIREN/WHISTLE button to activate siren, hold to play exit whistle, short press again to close
  • Recording and Playing operation: Press REC button to record, press PLAY to play recorded content, short press to stop playback
  • Volume Adjustment operation: Adjust volume when no card is inserted
  • Bluetooth operation: Press and hold PLAY key to connect to Bluetooth on the phone, exit Bluetooth mode and press to enter shout mode
  • AUX Control Panel operation: Switch button to TALK, switch LOCK on the left side of microphone to the top, plug in USB or SD card to play music
  • LED light: Flashes when music is playing
  • Notice: Do not touch the USB while the indicator light is flashing, USB capacity should not exceed 6G and only MP3 format is supported

Product Usage Instructions

1. Power Source

  • Open the back cover of the megaphone.
  • Remove the plastic battery sleeve.
  • Insert 8 UM-2 cells with correct polarity or insert one 12V rechargeable battery.
  • Insert the sleeve into the battery compartment according to the instructions in the compartment.
  • Close the back cover until it locks.

2. Talk Operation

  • Dial the toggle switch to MIC.
  • Press the power key on MIC.
  • The indicator lights up, indicating the mic is powered on.
  • You can now speak into the microphone.

3. Siren/Whistle Operation

  • When the mic is powered on, short press the SIREN/WHISTLE button to activate siren.
  • Press and hold this key to play the exit whistle.
  • Short press again to close the siren/whistle.

4. Recording and Playing Operation

  • When the mic is powered on, press the REC button.
  • The indicator starts flashing, indicating the microphone is in recording mode.
  • Speak into the microphone to record your content.
  • To play the recorded content, press the PLAY button.
  • To stop playback, perform a short press on the PLAY button.

5. Volume Adjustment Operation

  • When no card is inserted, press the volume adjustment buttons to adjust the volume.

6. Bluetooth Operation

  • When the mic is powered on, press and hold the PLAY button.
  • You will hear a Bluetooth voice indicating the microphone is ready to connect.
  • On your phone, connect to the Bluetooth named “MEGAPHONE”.
  • To exit Bluetooth mode, press the Bluetooth button again.
  • Press the shout button to enter shout mode.

7. AUX Control Panel Operation

  • First, switch the button to TALK.
  • Then, switch the LOCK on the left side of the microphone to the top position.
  • The LED light will turn on.
  • Plug in a USB or SD card to play music.
  • To choose the music between AUX and USB, press the M button.

FAQ

  1. Can I play music and speak at the same time?
    • Yes, you can play music on the disk and speak at the same time without affecting each other.
  2. How can I turn off the volume control when playing music?
    • To turn off the volume control when playing music, simply turn down the volume control. This helps to reduce noise and save battery.
  3. Can I touch the USB while the indicator light is flashing?
    • No, it is advised not to touch the USB while the indicator light is flashing to avoid any interruptions or malfunctions.
  4. What is the maximum capacity of the USB and what format does it support?
    • The USB has a maximum capacity of 6G and it can only identify MP3 format. For more information, please visit www.PyleUSA.com

OPERATION

Open the Back Cover. Remove the plastic battery sleeve and insert 8 nos. UM-2 cells with correct polarity, insert the sleeve into the battery compartment according to the instructions in the compartment. Then close the back cover until it locks. Now your megaphone is ready for action. You can also open the back cover, remove the plastic battery sleeve and insert one 12V rechargeable battery then close the back cover until it locks.

TALK OPERATION

Dial the toggle switch to MIC and then press the power key on MIC, the indicator lights up, and then you can now speak into the microphone.

  • SIREN/WHISTLE Operation: Short press the SIREN/WHISTLE button when mic is powered ON to SIREN. Press and hold this key to play exit whistle, and short press again to close.
  • Recording and Playing Operation: When the MIC is powered on, press the REC button and the indicator starts flashing to record into the microphone. When the recording duration is over, press PLAY to PLAY the content of the recording. Turn off playback with a short press.
  • Volume Adjustment Operation: When no card is inserted, you can press to adjust the volume.
  • Bluetooth Operation: When the MIC is powered on, press and hold the PLAY key and you will hear a Bluetooth voice to connect the Bluetooth on the phone. The bluetooth name is MEGAPHONE. Exit bluetooth mode and press to enter shout mode.

Control Panel Operation

First switch the button to TALK and then switch me LOCK on the left side of the microphone to the top, the LED light is ON. Plug in a USB or SD card to play music. The led light will flash when the music is playing. Press M button to choose the music between AUX and USB.

Notice:

  1. You can play the music on the disk and speak at the same time, they will not affect each other.
  2. If you don’t want to speak when playing music, turn off the volume control, thus it can turn down the noise and save the battery.
  3. DO NOT touch the USB while the indicator light is flashing.
  4. The capability of the USB is no more than 6G, and it can only identify MP3 format.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals