WINONS WFC-0008 Hot Wire Foam Cutter User Manual

WINONS WFC-0008 Hot Wire Foam Cutter

Specifications

• Model: DC 9INV, P2U7TW
• Includes: Hot Wire Tip, 10m Replacement Wire, Long Cutting Tip, U-shaped Cutting Tip, Cutting Handle, Black Marker Pen, Desktop Holder, Power Adapter

Personal Safety Warnings

• Do not use the tool while tired or under the influence of drugs, alcohol, or medication.
• This tool should not be used by children under 12 years old without adult supervision.
• Wear a protective mask to avoid inhaling harmful smoke during foam cutting. Use an electric fan to draw fumes away from you.
• Burns can occur from touching the hot cutting wire. Wear protective gloves to prevent burning bare skin.

SYMBOLE

Package includes

Features

Functional Description

Thanks to the temperature adjusting button on the handle of the Foam Cutter. Users can adjust the temperature according to their needs. A variety of accessories and desktop holders make precise and convenient cuts. It allows users to work more easily on advertising word making, art model making, and various foam cutting projects and engraving projects.

Electrical Safety Warnings

• Please check whether the accessories of our products are complete and whether the products are damaged. Any questions, please contact us Immediately.
• It’s a normal phenomenon that produces smoke when you are using this product, please do not worry! Suggest using in a well-ventilated space or working in the open air, if possible.
• Be careful! Do not touch the heating part when the power is on. Please turn off the tool when not in use.
• If the users are children please use the products under adult supervision.
• Use a protective mask. The smoke from foam cutting can be harmful to your health, that’s why always wear a mask while working, a good respirator type with strong protection would be a great choice. Use an electric fan to draw the fumes away from you.
• Bums can occur from touching the hot cutting wire when it is at normal operating temperature.
• Wear protective gloves to escape burning bare skin. The Tip stays very hot for several minutes after the tool is turned off. To reduce the risk of burns, never touch any metal parts of a hot tool.

Application of The Device
This device is created to apply patterns and designs on a wide variety of foam types

• Expanded polystyrene (EPS)
• Expanded Polypropylene (EPP)
• Pearl Cotton
• Sponge
• KT board
• Cellular glass

GENERAL USER INSTRUCTION

• Plug the AC adaptor into the power socket . Connect the DC plug of the adaptor to the DC port at the end of the product handle.
• Take the cutting tip, and assemble it into the head of the handle.
• Please push the switch on the handle to the mark “-“. The heating needle of the cutting pen starts up to heat up, and then it can be used.
• The cutting effect would be better if you use the marker pen to draw the shape before the cutting operation.
• You can slide the temperature button to choose the temperature that you need when you need to cut precisely and slowly.
• Warming up takes 5-45 seconds
• Please push the switch on the handle to the mark “o” first, after cooling, remove the cutting tip and change the others.
• Please do not remove the cutting tip while the switch is on the mark “-“.

Operations

• Replace the heating wire for the bow (Fig.1&- Fig.2&): Please wind the heating wire for 4-5 circles in the grooves at both ends of the bow, when winding, please slightly tighten the hot wire tip. After winding, the bow is about 170mm.
• Install desktop holder (Fig.3): Fix the desk-top holder on the edge of the desk. Tighten the triangular handle. Please don’t over-tighten to avoid damaging the desktop holder. In Fig.3, insert the cutting handle and cutting bow and adjust the direction of the bow.

Tip and its Use

• Hot Wire Tip- Heats up to 380°C 15s..The tip Is designed to cut straight lines and curves and to sculpt the edges of large pieces. You can reach perfectly smooth and even cut with hot wire.
• Long Cutting Tip- heated up to 380°C in 15s, This tip is perfect for creating more detailed design cutting.
• U-shaped Cutting Tip- heated up to 380°C in 15s.The U-shaped cutting tip can be used to create patterns and design the foam surface.

HOW TO CARE AND CLEAN TIP

• Keeping your foam-cutting tool clean is mandatory
• If you want to reach a good result and make the process of cutting easier. Here are the most effective ways to clean the tip:
• You can clean the tip with acetone, but do it when the tip is cold.
  • Sandpaper- It can be used to remove the remains of melted foam from the hot knife. This method is pretty easy and can be done frequent- ly. We recommend using 320-grit paper to avoid damaging the tip.
  • Steel Wool- an easy way to clean the tip of your kit without any difficulties.
  • Knife Method – another simple method to clean the tip and remove the remains of the foam buildup is using a knife.
  • Jeweler’s Rouge- this is not as quick and easy as the other methods, but it’s safer and more effective for the tip.
  • Polishing Burr – It Is one of the best ways to reach a deep clean result. But in This case, you need to be extremely careful in order not to over-polish the tip as this may cause thinning over time.

FAQ

• Q: How do I replace the heating wire for a bow?
  • A: Wind the heating wire for 4-5 circles in the grooves at both ends of the bow, slightly tightening the hot wire tip. The bow should be about 170mm in length.
• Q: How do I install the desktop holder?
  • A: Fix the desktop holder on the edge of the desk and tighten the triangular handle. Do not over-tighten.

support@winons.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>