WINONS WFC0003 Foam Cutter User Manual

WINONS WFC0003 Foam Cutter

Product Information

Specifications:

• Class: III construction
• Power Supply Unit: Detachable
• Unit Provided: XSD-0902000NEUD

Product Usage Instructions

Compatibility:

This appliance is designed to be used only with the unit provided (XSD- 0902000NEUD). Do not use any other power supply unit or modify the appliance to fit a different unit.

Age and Abilities:

This appliance can be used by children aged 8 years and above, as well as individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. However, they must be supervised or instructed on the safe usage of the appliance and understand the potential hazards involved. It is important to ensure that children do not play with the appliance.

Cleaning and Maintenance:

Children should not perform cleaning or user maintenance tasks without adult supervision. Always ensure that the appliance is turned off and unplugged before cleaning or performing any maintenance.

Storage:

When the appliance is not in use, it must be placed on its stand to ensure stability and prevent accidents. Do not leave the appliance unattended without placing it on its stand.

Additional Instructions:

For alternative formats of instructions, you can visit our website: https://winons.com/.
Instructions may also be available in formats such as DVDs, providing you with multiple options to access the necessary information.

Frequently Asked Questions (FAQ)

• Q: Can I use a different power supply unit with this appliance?
  A: No, this appliance is only compatible with the provided unit (XSD- 0902000NEUD). Using a different power supply unit may result in damage to the appliance or pose a safety risk.

• Q: Can children use this appliance?
  A: Yes, children aged 8 years and above can use this appliance under adult supervision. It is important to ensure they understand the safe usage and potential hazards involved. Children should not play with the appliance.

• Q: Where can I find alternative instructions for this product?
  A: You can find alternative instructions in various formats, such as on our website https://winons.com/ or in formats like DVDs. These options provide flexibility for accessing the necessary information.

SYMBOLS

• Read the manual
• Wear face mask
• Wear eye protection
• Wear protective gloves
• Caution very hot

Package includes

Features

ELECTRICAL SAFETY WARNINGS

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
• Unmodified plugs and matching outlets will reduce risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY WARNINGS

• Stay alert, do not use the tool while you are tired or under the influence of drugs, alcohol or medication.

• Use protective mask. The smoke from foam cutting can be harmful for your health, that’s whyalways wear a mask while working, a good respirator type with strong protection would be a great choice.
  Use an electric fan to draw the fumes away from you. Work in the open air if possible or in well-ventilated rooms.

• Wear protective gloves in order to escape burning bare skin.

• Burns can occur from touching the hot cutting wire when it is at normal operating temperature.
  The Engraving Tip stays very hot for several minutes after the tool is turned off. To reduce risk of burns never touch any metal parts of a hot tool.

• For a part of class Ill construction supplied from a detachable power supply unit, the instructions state that the appliance is only to be used with the unit provided.
  This appliance is only to be used with the unit provided (XSD-0902000NEUD)

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• WARNING – This tool must be placed on its standwhen not in use.

• In addition, instructions are also available in an alter- native format such as on a website or in a format such as a DVD.
  Instructions are also available in our website. Website: https://winons.com/

Application of The Device

This device is created to apply patterns and designs on a wide variety of foam types

• Expanded polystyrene (EPS)
• Expanded Polypropylene (EPP)
• Pearl Cotton
• Sponge
• KT boardi
• Cellular glass

Operations Before Use

• Open the packaging and remove the device from the box.
• Remove the protective foil and transport protection.
• Check if all the parts of the kit are in the package.
• Check if the device is damaged during the transportation. If any problem is revealed, contact us via email to arrange repair or replacement.

GENERAL USER INSTRUCTIONS

• Read all the instructions before starting.

• Always make sure you keep the tool out of reach and away from children. Tips are very hot and can easily burn the skin.

• Keep work area clean and well-lit. Working with sufficient quantity and quality of light is essential to reach a good result.
  Draw the design on the foam or cut a pattern, pin it to the foam and make a rough trace of the pattern then remove it.

• Choose the tip and insert into the handle, make sure the position is secured. You can rotate the handle to fix it in a comfortable position and start to cut.

• Do not forget to turn the unit off whenever you leave it to avoid a fire hazard, also, it will prolong the life of the tool and it will serve you longer.

• Never set the tool down while it is turned on. Open the heat-safe metal stand and tape to your workplace, which must be flat, stable and heat resistant surface. The tool should always rest on the stand.

• Do not touch the tip of the tool, even if you’ve just switched it on, as the tips are very hot.

• Make sure the tip has been installed correctly. Be careful not to use excessive force while fixing the tips to avoid damaging the tool.

• Turn the tool off when changing the tip.

• Cutting wire is the only user-serviceable part. Use only our replacement wire included in the package or use dia. 0.19mm resistance wire, as installing a wrong kind of cutting wire can destroy the safety transformer or lead to an increased fire risk and further consequential damages.

• During the working process, make sure you are in a comfortable and relaxed position to avoid pains in arms, head, neck and back. If you begin to feel stress in the back of your neck, change your sitting position, or adjust the height of your seat.

• To clean the tool avoid all the methods that are not listed in the section how to care and clean the tool.

• Use a test piece of foam to check the heat and to practice different tips.

Tips and Their Uses

• Hot Wire Tip – Heats up in 5 seconds up to 330°C-450°C. The tip is designed to cut straight lines and curves and to sculpt the edges of large pieces. You can reach perfect smooth and even cutting with hot wire.
• Long Hot-knife Tip – Heats up in 45 seconds up to 400°C-500°C. This tip is perfect for creating more detailed design cutting.
• Engraving Tip – Heats up in 90 seconds up to 350°C-450°C. The engraving tip can be used to create patterns and designs in the foam surface. It engraves to a specified depth you want to reach. You can reach the ideal depth of engraving by controlling applied pressure.

HOW TO CARE AND CLEAN TIPS

• Keeping your foam-cutting tool clean is mandatory if you want to reach a good result and make the process of cutting easier. Here are the most effective ways to clean the tips:
• Clean hot wire by just gently wiping it against a cloth or paper towel while the foam is in a melted state. It’s the only recommended way to clean the wire. If it starts not to cut as good as it used to, it means that you need to change the wire.
• You can clean the tips with acetone, but do it when the tips are cold.
• Sandpaper – it can be used to remove remains of melted foam from the hot-knife and engraving tips. This method is pretty easy and can be done frequently. We recommend using 320 grit paper to avoid damaging the tips.
• Steel wool – an easy way to clean the tips of your kit without any difficulties.
• Knife Method – another simple method to clean the tips and remove the remains of the foam buildup is using a knife.
• Jeweler’s Rouge – this is not as quick and easy as the other methods, but it’s safer and really effective for tips.
• Polishing Burr – it is one of the best ways to reach a deep clean result. But in this case, you need to be extremely careful in order not to overpolish the tips as this may cause thinning over time.

support@winons.com

References

• WINONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>