AIRMASTER HC2TIM 2kW Convector Heater with Timer Instruction Manual

: June 17, 2024
: AirMaster

Table of Contents

AIRMASTER HC2TIM 2kW Convector Heater with Timer
Product Information
Features & Benefits
Safety Information
Technical Specifications
SAFETY INSTRUCTION
OPERATION
- USING THE TIMER
PROTECTION AGAINST OVERHEATING
CLEANING
Information Requirements
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIRMASTER HC2TIM 2kW Convector Heater with Timer

Product Information

Specifications

Model: HC2TIM
Power: 2kW
Heat Settings: 750W / 1250W / 2000W
Color: White
Handle: Black
Feet: Sturdy plastic studs
Design: Slim, compact, and lightweight
Thermostat Control: Variable with over-heating and thermal safety protection
Timer: 24hrs with 15 mins segments
Versions: Standard / Turbo (with fan heater) / Timer (with 24hr segment timer)
Safety Features: Tip-Over Sensor, Over-Heat Protection
Construction: Durable corrosion-resistant powder-coated steel body with powder-coated steel grills
Cable Length: 1.8Mtr with 3 Core cable 1.0mm
Class Approvals: CE, GS, RoHS, BSEN 60335-1:2012
Noise Level: Silent operation
Nett Weight: 2.9Kg
Gross Weight: 3.7Kg
Warranty Period: 1 Year
Other Applications: Domestic, commercial applications

FAQ

Q: Is this product suitable for well-insulated spaces?
- A: Yes, this product is only suitable for well-insulated spaces or occasional use.
Q: Where can I dispose of the decommissioned fitting?
- A: Do not dispose of the decommissioned fitting in household waste. Dispose of the fitting in the appropriate section of your local civic amenity site or recycling center only.
Q: Can I use this heater in areas with flammable liquids or fumes?
- A: No, do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
Q: Can I mount this heater on the wall?
- A: No, the heater cannot be mounted on the wall.
Q: What is the warranty period for this product?
- A: The warranty period for this product is 1 year.

Features & Benefits

Automatic selection of 3 heat settings: 750W / 1250W / 2000W
White body with black handle and sturdy feet plastic studs
Slim, compact and light design with easy to set on/off function
Variable thermostat control with over heating and thermal safety protection trip over cut-out switch
Complete with 24hrs timer with 15 mins segments
Available in 3 functional versions: Standard / Turbo (with fan heater) / Timer (with 24hr segment timer)

Product Code: HC2TIM

Safety Information

IMPORTANT: Before undertaking any work on or maintenance of fitting:-

Switch off power supply and allow sufficient time to cool before handling
Do not dispose of decomissioned fitting in household waste
Dispose of fitting in the appropriate section of your local civic amenity site or recycling centre only

Technical Specifications

General Information|
---|---
Product Colour/Finish| White
Dimensions (mm)| 585 x 420 x200
Ingress Protection (IP)| n/a
Electrical|
Input Votage (V)| 220-240V
Output Rating (W)| 2000W
Frequency (Hz)| 50Hz
Working temperature (°C)| n/a
Mounting Position| Floor
Mounting Bracket (Y/N)| N
Cable: Plug cord length: 1.8Mtr with 3 Core cable 1.0mm with BS1363 approved plug

Class I

Approvals: CE, GS, RoHS, BSEN 60335-1:2012
Energy Rating (ErP): n/a

Performance Data

Air Volume/Velocity (cbm): n/a
Noise level (dB): Silent operation
Tip-Over Sensor (Y/N): Y
Over-Heat protection (Y/N): Y

Construction

Body: Durable corrosion resistant powder coated steel body
Grill: Powder coated steel grills
Motor: No motor
Nett Weight: 2.9Kg
Gross Weight: 3.7Kg
Warranty Period (Years): 1Yr

Other

Applications: Domestic, commercial applications

This product is only suitable for well insulated spaces or occasional use Please carefully read this instruction before using product.

SAFETY INSTRUCTION

Do not use the heater unless the feet are correctly attached.
Ensure the power supply to the socket into which the heater is plugged is in accordance with the rating label on the heater and that the socket is earthed.
Keep the power cord away from the hot body of the heater.
Warning: Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
WARNING: in order to avoid overheating, do not cover the heater.
The meaning of figure in marking is ‘DO NOT COVER’
Indoor use only.
Do not place the heater on carpets having a very deep pile.
Always ensure that the heater is placed on a firm level surface.
Do not place the heater close to curtains or furniture in order to avoid a fire hazard.
Warning: heater is not located immediately below a socket-outlet.
Warning: Heater can’t be mounted on the wall.
Do not insert any object through the heat outlet or air grilles of the heater.
Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
Always unplug the heater when moving it from one location to another.
If the supply cord is damaged, it must be replaced by the manufacturer. Its service agent or similarly qualified persons in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

Before Using The Heater

Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. These are to be attached to the base of the heater using the 4 self-tapping screws provided, taking care to ensure that they are located correctly in the bottom ends of the heater side moldings.

OPERATION

NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not been used for a long period of time the heaters may emit some smell and fumes. This will disappear when the heater has been on a short while.

Choose a suitable location for the heater, taking into account the safety instructions above. Insert the plug of the heater into a suitable socket. Turn the thermostat knob fully in a clockwise direction to the maximum setting. Turn on the heating elements by means of the rocker switches on the side panel.

When the heating elements are on the switches will illuminate. For maximum heat output both switches should be on. When the desired room temperature has been reached, the thermostat knob should be turned slowly anti-clockwise until the thermostat is heard to click off and the lights on the element switches are seen to go out. After this the heater will keep the air temperature in the room at the set temperature by switching on and off automatically.

USING THE TIMER

This model is fitted with a 24hr timer which has 96 segments around its circumference, each segment being equivalent to 15 minutes of time. With the aid of this timer it is possible to preset the time and duration of the period(s) that it is desired the heater will operate, in any 24hr period.

Timer Operation

The centre of the timer has a 3 position slide switch.

– The heater is controlled by the timer
I- The heater can be switched on using the thermostat and heater switches.
0- No power is fed to the heater

Setting the Timer

Ensure the slide switch on the timer is at position of .
Rotate the outer ring of the timer in a clockwise direction until the current time is lined up with the arrow pointer, i.e. if the time the timer is being set is 8 pm; rotate the outer ring until the number 20 is in line with the arrow pointer.
Set the time the heater is required to run by pulling the segments around the outer ring forward appropriate to the running period(s) required.
When set, the heater will operate each day during the times programmed. Note, the heater must always be plugged into a power socket, the element switches must be in the on position and the thermostat must be suitably set to ensure the heater will come on.
If the heater is required to run continuously the slide switch on the timer should be set to the “I” position.
If it is subsequently required to revert back to timer operation, the slide switch on the timer should be set to the central (clock) position.

Note: When using in timer mode, due consideration should be given to the fact that the heater may come on whilst unattended.

PROTECTION AGAINST OVERHEATING

An additional fitted safety thermostat protects the heater against overheating and switches it off automatically. The service lamp then goes out. The heater is ready for service again after a short cooling-off phase (approx. 15 minutes).
If this repeat itself, first check whether the thermostat switch it set correctly or if objects hinder the heating operation.

CLEANING

CLEANING THE HEATER

Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.

STORING THE HEATER

When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry place.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Information Requirements

Information requirements for electric local space heaters

Model identifier(s): HC2TIM

Heat output

| Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output| Pnom| 2,0| kW| manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)| ****

Pmin

| ****

0,75

| ****

kW

| manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous heat output|

Pmax,c

| ****

2,0

| ****

kW

At minimum heat output

| ****

elmin

| ****

N.A.

| ****

kW

| single stage heat output and no room temperature control| **** [no]

In standby mode

| ****

elSB

| ****

0

| ****

kW

| Two or more manual stages, no room temperature control| ** [no]
| with mechanic thermostat room temperature control| [yes]
| with electronic room temperature control| [no]
| electronic room temperature control plus day timer| [no]
| electronic room temperature control plus week timer| [no]
| Other control options (multiple selections possible)**
| room temperature control, with presence detection| [no]
| room temperature control, with open window detection| [no]
| with distance control option| [no]
| with adaptive start control| [no]
| with working time limitation| [yes]
| with black bulb sensor| [no]
Contact details| Refer to Applicant Name / Address