PHICHI JJCWBR-04 4 Inch Stainless Bathroom Sink Faucet Installation Guide
- June 17, 2024
- PHICHI
Table of Contents
Faucet Installation Manual
Committed to Creating a Better Life
MODEL NO. JJCWBR-04
Faucet Installation Guide
- Insert the faucet.
- Place the rubber gasket and steel washer on the nut and tighten it.
- Connect and tighten the supply hoses.
- Turn on the water supplies. Check all connections for leaks.
Pop-up Drain with Overflow Installation Guide
NOTES:
-
Fits for sink WITH overflow hole.
-
Clean the sink hole, make sure to remove debris.
-
Please avoid using plumbers putty.
-
The seal on top is leak-free.
Plumber’s putty might cause damage. -
Silicone and plumbing tape can be use for sealing requirement.
- Unscrew components A & B.
- Slide the drain body C through the hole, in the sink.
- Screw components A & B back on as shown.
- Connect the rear end of the drain to the Drain Pipe.
- Push to activate.
If you have any question or need help, please be free to contact us.
After-sale service: BietorTeam@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>