AIBO TECHNOLOGY iw20 3 In 1 Foldable Wireless Charger Stand User Manual

AIBO TECHNOLOGY iw20 3 In 1 Foldable Wireless Charger Stand

Product Information

• Specifications
  • Name: 3-in-1 Foldable Wireless Charger Stand
  • Model: iw20, iw30
  • Input: DC 9V2A, 18W or above
  • Wireless Output for Phone: 5W/7.5W/10W/15W
  • Wireless Output for AirPods: 5W (max)
  • Wireless Output for iWatch: 3W (max)
  • Material: Aluminum Alloy Plastic Shell
  • Product size: L68L68H23mm
  • N.W.: iw20/210g, iw30/160g

Product Usage Instructions

• Charging the Foldable Charger Stand
  • Open the folding charger. You can fold down/up the watch’s wireless charger while charging.
  • Connect this charger to the PD/Quick Charger by USB cable. (Input: PD/QC3.0 DC 9V/2A)
• Charging Your Devices
  • Please follow the steps below to charge your devices:
  • Place your iPhone, AirPods, or iWatch on the wireless charger pad.
  • The cellphone indicator turns on blue while the cellphone is placed on the phone charger pad and starts charging.
  • The indicators start slow flashing when the device is not placed or aligned properly, or the wireless charging connection is not established properly, such as a large gap caused by some type of phone case.
  • Adjust the positions or remove the phone case and check if the indicator shows normal charging.
  • When the device is fully charged, simply pick it up from the pad to terminate charging.
• Compatibility
  • The 3-in-1 Foldable Wireless Charger Stand is compatible with the following devices:
  • Apple Watch 9, 8, 7, 6, SE, 5, 4, 3, 2
  • AirPods Pro, 3, 2 (with wireless charging)
  • iPhone 15, 15 Plus, 15 Pro Max (Not Applicable for iPhone 15 Pro, MagSafe iPhones)
  • Note: For non-MagSafe iPhone models, you may have to align them manually.
• Important Usage Information
  • The wireless charger has a type-C jack and accepts input 9V2A or above. Check the power ratings of the interface and make sure it can provide enough power.
  • The wireless charging distance is up to 4mm. Most non-metallic cases are acceptable for wireless charging. Some thicker cases on your phone, AirPods, or iWatch may cause failure of wireless charging.
  • The wireless charger has a temperature detector inside as a kind of protection.
  • When the temperature increases above 45°C, wireless charging stops and resumes when the temperature drops. With some devices that are not well-compatible, the temperature may appear a little high.
  • Pay special attention to the temperature rise in that case.
  • Avoid high temperature or humidity while using the product.
  • Avoid dropping or strong impact.

FAQs

• Q: What type of charger should I use with this product?
  • A: Please use an 18W or 20W fast charger, not a 10W charger. Otherwise, the indicator light of the charger will flash, causing abnormal charging.
• Q: Is there an indicator light when charging AirPods and iWatch?
  • A: No, there is no indicator light when the AirPods and iWatch are charging.
• Q: What should I do if the indicators start flashing?
  • A: The indicators start slow flashing when the device is not placed or aligned properly, or the wireless charging connection is not established properly, such as a large gap caused by some type of phone case. Adjust the positions or remove the phone case and check if the indicator shows normal charging.
• Q: What happens when the device is fully charged?
  • A: When the device is fully charged, simply pick it up from the pad to terminate charging.
• Q: Can I use this wireless charger with MagSafe iPhones?
  • A: No, this wireless charger does not apply to MagSafe iPhones. It is compatible with non-MagSafe iPhone models, but you may have to align them manually.
• Q: Can I use this wireless charger with cases on my devices?
  • A: Most non-metallic cases are acceptable for wireless charging. However, some thicker cases on your phone, AirPods, or iWatch may cause failure of wireless charging.
• Q: What happens if I use an underrated charger or cable?
  • A: Using an underrated charger or cable may cause wireless charging to slow down or fail. If a fast charger is not used, the indicator light will flash.
• Q: What are the FCC regulations for this product?
  • A: This equipment has been tested and found to comply with part 15 of the FCC Rules. Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. Operation is subject to certain conditions regarding harmful interference and radiation exposure limits.
  • Caution: This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Instructions

1. Open the folding charger. You can fold down/up the watch’s wireless charger while charging.
2. Connect this charger to the PD/Quick Charger by USB cable.(Input: PD/QC3.0 DC 9V/2A)
3. Charge your devices.
   • Charge your phone(stand-up)
   • Charge your Airpods
   • Charge your iWatch
   • Charge your phone(lay flat)

Product Description

• Thanks for your choosing our 3-in-1 foldable wireless charger.
• This product has three wireless charging pads and allows charging your iPhone, AirPods, and iWatch at the same time.
• It supports wireless battery charging of most Qi-compatible smartphones.
• Preformed foldable textile wrap, portable compact size, and high integration help you stay organized on your desktop or while traveling.

Product Appearance

• Charging pad for iPhone(Magnetic): 7.5W/10W/15W
• Charging pad for iWatch: 3W
• Charging pad for Airpods: 5W

Instructions:

1. The product comes with a type-C charging cable. Please use an 18W or 20W fast charger, not a 10W charger. Otherwise, the indicator light of the charger will flash, causing abnormal charging.
2. There is no indicator light when the Airpods and watch are charging.
3. The cellphone indicator turns on blue while the cellphone is placed on the phone charger pad and starts charging.
4. The indicators start slow flashing when the device is not placed or aligned properly, or the wireless charging connection is not established properly, such as a large gap caused by some type of phone case. Adjust the positions or remove the phone case and check if the indicator shows normal charging.
5. When the device is fully charged, simply pick it up from the pad to terminate charging.

Parameters

Compatibility list

• The devices listed below have been tested and proven to be compatible with this product: Apple Watch 9,8, 7, 6, SE, 5,4,3,2
• AirPods Pro, 3, 2 (with wireless charging)
• iPhone 15,15 Plus,15 Pro Max.Not Applicable for iPhone 15 Pro,
• iPhone 14, 14 Plus, 14 Pro Max. Not Applicable for
• iPhone 14 Pro,
• iPhone 13, 13 Pro, 13 Pro Max/iPhone 12, 12 Pro, 12 Pro
• Max/iPhone 11, 11 Pro, 11 Pro Max
• iPhone X, XS, XS Max, XR/iPhone8,8Plus
• Samsung Galaxy S21,S20,S10,S10 Plus,S10E,S9,S9 Plus,S8,S8 Plus
• Samsung Note 10, 9, 8, 7, S7, S7 Edge, S6, S6 Edge, S6
• Edge Plus Other phones with wireless charger
• This product has been designed as per Qi specifications.
• For any questions or issues on compatibility, please contact us.

Precautions

1. With the wireless charging technology, the induction coils shall be aligned properly so that the communication is established and battery charging can begin. The magnets in the phone charging pad are compatible with MagSafe iPhones and ensure accurate alignment. For the non-MagSafe models, you may have to align them manually.
2. The wireless charger has a type-C jack and accepts input 9V2A or above. Check the power ratings of the interface and make sure it can provide enough power.
3. The wireless charging distance is up to 4mm. Most nonmetallic cases are acceptable for wireless charging. Some thicker cases on your phone, AirPods, or iwatch may cause failure of wireless charging.
4. The wireless charger has a temperature detector inside as a kind of protection. When the temperature increases above 45, wireless charging stops, and resumes when the temperature drops. With some devices that are not well-compatible, the temperature may appear a little high. Pay special attention to the temperature rise in that case.
5. Avoid high temperature or humidity while using the product.
6. Avoid drop or strong impact.

Packing list

• 1 * 3-in-1 Foldable Wireless Charger Stand
• 1 * Type-c charging cable,1M
• 1 * User manual

Indicator Light Description

1. Power on: The blue light will turn on for 3 seconds and then turn off.
2. Standby: The blue light will turn on for 3 seconds, then turn off to enter standby mode.
3. Charging mode: The blue light will remain on for 10 seconds before turning off.
4. Fully charged: The blue light turns off.
5. Metal object detection prompt: The blue light flashes until the object is removed.

Warning

An underrated charger or cable may cause wireless charging to slow down or fail. If the fast charger is not used, the indicator light will flash.

Fcc

Fcc statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Portable RF Exposure Information
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>