AVANTCO 177PG200S Panini Grills User Manual

June 17, 2024
AVANTCO

AVANTCO logo

AVANTCO 177PG200S Panini Grills

Thank you for purchasing and using our Panini/Sandwich Grill. To make best use of this product and avoid damage and injury, please read this manual carefully before using the machine, and keep it handy for future reference. The Sandwich Grill design combines the advantages of stylish design, efficient construc- tion, ease of operation and simple maintenance. The grill temperature can be easily adjusted to suit cook-ing requirements, and, while mainly used for sandwich grilling, the grill may be used for other foods.

WARNING : Any modifications or incorrect installation, unauthorized adjustments or maintenance by unauthorized personnel may result in property loss or injury. Please contact the supplier for any necessary adjustment or repair, which should only be done by trained professionals.
CAUTION : For your safety, do not place or store any flammable liquid or gas items near the sandwich grill.
WARNING : This equipment must be connected to a grounded power outlet for your safety.

Notes

  1. This product is intended for commercial use only.
  2. Do not disassemble or modify the machine.
  3. Lift the upper grill assembly smoothly; jerking it up may cause damage or injury.
  4. Before cleaning, disconnect power and allow machine to cool.
  5. Do not immerse in water or spray water onto the grills. Water may cause short circuit and injury or damage.
  6. To avoid damage, do not jam materials onto the grill or place heavy objects there.
  7. When the machine is in use, the body and grill plates are hot, and will cause burns if touched.
  8. Do not use an ungrounded power supply cord.
  9. This panini grill is not intended for use by children or individuals with impaired mental and/or motor skills. Individuals who lack experience operating a panini grill should be supervised during use.

Safety Precautions

  1. It is recommended that the machine be unplugged during thunderstorms to avoid potential damage from nearby lightning strikes.
  2. Avoid damaging the controls or grill surfaces with sharp or heavy objects.
  3. Turn off power and unplug after each use.
  4. Do not use the machine with a damaged power cord.
  5. Any internal repair or maintenance should be performed by a factory authorized repair technician.

Specifications

Item Number| Width| Depth| Height| Cooking Surface Width| Cooking Surface Depth| Amps| Hertz| Voltage| Wattage| Size| Phase| Power Cord Length
---|---|---|---|---|---|---|---|---|---|---|---|---
177PG100| 123/8″| 12″| 81/2″| 81/2″| 81/2″| 14.6| 60| 120| 1750| Single| 1| 4 feet
177PG200| 17″| 12″| 81/2″| 133/8″| 83/4″| 14.6| 60| 120| 1750| Single| 1| 4 feet
177PG400| 221/4″| 12″| 81/4″| 195/8″| 91/8″| 14.6| 60| 120| 3500| Dual| 1| 4 feet

Note : Measurements shown are measured in inches.

Notes
This machine is intended for use at 120V 60 Hz only.

  1. A suitable circuit protector (fuse, circuit breaker, etc.) should be located near the machine.
  2. Be certain cable is properly connected to voltage source.
  3. Do not place any hard objects on the grill. Do not slam the grill closed.
  4. Recommended temperature range for normal use is 392°-482° F.
  5. The machine is intended for use where room temperature is below 113°F and humidity below 85%.
  6. Do not use caustic or abrasive products for cleaning.

Instructions for First Time Use

In order to protect the plates of your new grill during transportation, a layer of food-safe oil was coated on the surface prior to shipment. This oil is harmless, but must be removed before you begin to use. To
remove, preheat the grill until the oil liquefies. Next, carefully wipe away the melted oil with a clean, soft cloth. Once all of the oil is removed, you can begin to use your grill.

Operating Instructions

  1. Be sure power cord is properly connected to a proper source (120V, 60 Hz)
  2. Turn the machine on using the power switch(es). The switch will light up to indicate power is available.
  3. Set to desired temperature (heating indicator light will come on). Warm-up time is approximately 20 minutes. Heating indicator will cycle at set temperature.
  4. When set temperature is reached, the heating indicator light will turn off. Lift top grill using black handle and lightly grease grill plates with vegetable oil. Place food on grill and lightly press handle down. Excess oil will collect in the grease collection tray. Remove food when cooked. The heating elements will automatically cycle as needed. Turn machine off when no longer needed and unplug from power source.

Timer Instructions

Note : The timer does not turn off the grills. The timer will beep continuously until the “reset” button is hit. The grills will continue to heat.

  1. To program the timer of your panini grill, plug in and turn on the grill. Set the time using the up and down arrow buttons. To move through the time with fast scroll, hold down the up or down arrow for 3 seconds. The timer will beep twice. The timer can be set for up to 15 minutes.
  2. After setting your time, hit the “start/stop” button to begin the timer. To pause the timer, hit the “start/stop” button.
  3. When the timer beeps, hit the “reset” button to turn it off.
  4. Hitting the “reset” button will return the set time to the last inputted time. To change set time, use the up/down arrows again to adjust.

Note : When ending the timer, this will also reset the time.

Cleaning and Maintenance

  1. Disconnect machine before cleaning and allow to cool.
  2. Use only a damp towel with non-corrosive cleaner. Do not immerse or flush with water.
  3. Wipe down outside surface to remove any soil.
  4. Store in a dry clean area when not in use.

Attack tough grease, oil, and carbon with this ready to use decarbonizer and degreaser. Its unique formula is designed to clean ovens, grills, hoods, and a wide variety of other surfaces.

Daily Check

  1. Before using the machine, visually inspect for any signs of damage or frayed power cord.
  2. Be certain machine is on a level countertop.
  3. After turning it on, check for anything unusual before use.

Inspect the machine every day before using. If there is any question about operation, do not use.

Parts Key Single Grill

AVANTCO 177PG200S Panini Grills 2

Diagram # and Part Name                Diagram # and Part Name Diagram # and Part Name

1. Green “Power” Light| 19. Bottom Plate| 37. Drip Tray
2. Temperature Control Knob| 20. Upper Grill Cover| 38. Thermostat
3. Screw M4x6| 21. Slotted Screw M4x8| 40. Bottom Insulator
4. Orange “Hot” Light| 22. Top Cover| 41. Bottom Pan
5. Lower Case| 23. Slotted Screw M4x8| 42. Slotted Screw M4x8
6. Internal Wrenching Screw M6x10| 24. Upper Insulator| 43. Barrier Strip Mounting Plate
7. Flat Washer| 26. Top Grill Plate| 44. Slotted Screw M4x8
8. Internal Wrenching Screw M5x25| 27. Top Heating Element| 45. Ceramic Termical Board
9. Flat Spacer| 28. Wiring Guide Tube| 46. Hex Head Screw M6x20
10. Spring| 29. Wiring Guide Tube Stop| 47. Hex Nut M4
11. Rear Shaft| 30. Guide Tube Retainer| 48. Rubber Foot
12. Shaft Retainer| 31. Retaining Ring| 49. Rubber Heater Pressure Plate
13. Internal Wrenching Screw M6x40| 32. Upper Plate Shaft| 50. Bottom Heating Element
14. Rear Upper Cover| 33. Internal Wrenching Screw M6x8| 51. Internal Wrenching Screw M6x8
15. Slotted Screw M4x8| 34. Internal Wrenching Screw M6x8| 52. Bottom Cover
16. Spring Pin| 35. Handle| 53. Philips Head Screw M4x8
17. Ground Screw M6x15| 36. Grease Collector| 54. Hex Nut
18. Power Cord|

Parts Key Double Grill

AVANTCO 177PG200S Panini Grills 3

Diagram # and Part Name Diagram # and Part Name Diagram # and Part Name

1. Green “Power” Light| 19. Bottom Grill Plate| 37. Bottom Insulator
2. Temperature Control Knob| 20. Upper Grill Cover| 38. Thermostat
3. Screw M4x6| 21. Slotted Screw M4x8| 39. Slotted Screw M4x8
4. Orange “Hot” Light| 22. Top Cover| 40. Barrier Strip Mounting Plate
5. Lower Case| 23. Slotted Screw M4x8| 41. Slotted Screw M4x8
6. Internal Wrenching Screw M6x10| 24. Upper Insulator| 42. Ceramic Terminal Board
7. Flat Washer| 26. Top Grill Plate| 43. Hex Head Screw M6x20
8. Internal Wrenching Screw M5x25| 27. Top Heating Element| 44. Hex Nut M4
9. Flat Spacer| 28. Wiring Guide Tube| 45. Rubber Foot
10. Spring| 29. Guide Tube Retainer| 46. Rubber Heater Pressure Plate
11. Rear Shaft| 30. Retaining Ring| 47. Bottom Heating Element
12. Shaft Retainer| 31. Upper Platen Shaft| 48. Internal Wrenching Screw M6x8
13. Internal Wrenching Screw M6x40| 32. Internal Wrenching Screw M6x8| 49. Bottom Cover
14. Rear Upper Cover| 33. Internal Wrenching Screw M6x8| 50. Philips Head Screw M4x8
15. Slotted Screw M4x8| 34. Handle| 51. Hex Nut M6
16. Spring Pin| 35. Handle Frame|
17. Ground Screw M6x15| 36. Drip Tray
18. Power Cord|

Single Grill Wiring Diagram

AVANTCO 177PG200S Panini Grills 4

177PG177PG100100, 1、77PG177PG100S100S, 17、7P1G10077PG100GSGS, 177、PG200177PG20, 1770P、G200177PG200S, 177PSG、200177PGGS1 200G S

AVANTCO 177PG200S Panini Grills 5

177PG100T, 177PG100ST, 177PG100GST, 177PG200T, 177PG200ST, 177PG200GST

Double Grill Wiring Diagram

AVANTCO 177PG200S Panini Grills 6

177PG400, 177PG400S, 177PG400GS

AVANTCO 177PG200S Panini Grills 7

177PG400T, 177PG400ST, 177PG400GST

www.AvantcoEquipment.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AVANTCO User Manuals

Related Manuals