Laiao HLTJ8010B1 Wireless Communication Desk Lamp User Manual
- June 17, 2024
- Laiao
Table of Contents
**Laiao HLTJ8010B1 Wireless Communication Desk Lamp User Manual
**
EACH PART OF THE PRODUCT
INSTRUCTION FOR USE
- Please insert the plug of the product into power supply.
- After plugging in, turn on/off indicator-1 and wireless charger indicator-2 which is blue lighting up, the power is successfully connected.
- Please touch the turn on/off button P01. The LED desk lamp is on, and indicator-1 turn off.
- When you need to change the light color of the LED light, please touch the color change button P00, there are five color modes to choose from 3000-6500K.
- There are 7 brightness levels for LED desk lamp, Please adjust the brightness of the lights by touch button P01-P07.
- Touch the on/off button P01 for 3 seconds to turn off the light The LED light turns off, and turn on/off indicator-1 turn blue at the same time.
- Other Functions:
- *Color Memory Function : Once turn the button on, the desk light resumes your last used color, brightness level is fixed at the fourth level.
- “Wireless Charger Function : The base of LED desk lamp as a wireless charger, which can charge any Qi-enabled devices on it. The indicator-2 turns red when charging.
- “USB Port : The base of LED desk lamp has a USB port which can charge some appliances that support USB port.
LETTER OF GUARANTY
- The warranty period is limited to one year from the date of purchasing.
- During the warranty period, the company will repair free of charge if the malfunction occurs according to the correct use of the instruction manual
- The following conditions are not covered by the warranty.
- The situation of transfer or resale.
- The desk lamp isn’t used correctly according to the instruction.
- Failure and damage caused by falling, impact, pressure, external factors of the load lamp.
- Failures and damages caused by natural disasters such as fire, earthquake, lightning and wind.
- If you need to repair the product, please contact our company in advance.
- According to the company’s judgment, it is possible to replace it with an equivalent product. In addition, the products sent will not be returned.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.