KEURIG 5000197492 K Elite Single Serve Pod Coffee Maker User Manual
- June 17, 2024
- Keurig
Table of Contents
5000197492 K Elite Single Serve Pod Coffee Maker
FAQ
Why there is no power coming out?
1.Re-plug the power cord or test it with another socket 2. Press the power button/remote control to power on 3. Check the air inlet/outlet and see if there is any obstacles and abnormal deformations.
Why my heater not turning on?
Ensure that the voltage and frequency is the same as required in the user manual Check if the power button on the control panel is abnormal by turning it on/off via the remote control Check whether the LED light on the panel is on when plugged in Take a short video
Why does the fan heat up slowly ?
Switch the unit to HI mode. Switch to normal mode. Clean the air inlet/outlet
Why is my LED blinking ?
Ensure that the voltage and frequency is the same as required in the user manual
Why does my heater shut off randomly ?
1.Check if it is due to that the timer is on 2. When the set temperature is reached, the heater will stop working, and come back on when ambient temperature is lower than the set temperature 3. When the ambient temperature is above 50°C / 122°F, the heater will stop heating and the overheat alarm will be triggered with malfunction code FF on LED display and beeps. Please unplug it from the power source and power it on again when the ambient temperature drops below 50°C / 122°F
Why is the OSC function not working?
1.Make sure the Oscillation Function has been activated. 2. Relocate the unit and make sure the heater is on a stable, secure surface. Note: If there is cracking sound when oscillating, please try to apply lubricant to the base if possible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>