EPSON L1110 Tank Ink Tank Printer User Guide

EPSON L1110 Tank Ink Tank Printer

Specifications

• Product: Printer
• Compatibility: Windows
• Ink Handling: Handle with care to avoid splattering
• Additional Items: May be included depending on the location

Product Usage Instructions

Initial Setup

1. Remove the cap from the ink bottle while keeping it upright to prevent ink leakage.
2. Windows users can set up the printer using the CD supplied or by visiting the website for software installation.

Ink Charging

• The initial ink bottles provided should be used to charge the print head partially.
• These bottles may print fewer pages compared to subsequent ink bottles.

Note on Ink Usage

• Use the ink bottles that came with your product for best results.
• Epson does not guarantee the quality or reliability of non-genuine ink.
• Using non-genuine ink may cause damage not covered by Epson’s warranties.

Troubleshooting Ink Flow

• If the ink does not start flowing into the tank, remove the ink bottle and try reinserting it.
• Do not leave the ink bottle inserted as it may cause damage or ink leakage.

Print Quality Check
Check the print quality by following the instructions in the next section.

Print Head Cleaning
Print head cleaning uses some ink from all ink tanks.

Refilling Ink
Visit the website or use the CD supplied to install software for refilling ink.

Frequently Asked Questions (FAQ)

• Where can I find printer setup instructions?
  Refer to the provided guide or Epson video guides for printer setup instructions.

Read This First
The ink for this printer must be handled carefully. Ink may splatter when the ink tanks are filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.

Unpacking

Additional items may be included depending on the location.

Charging Ink

1. Use the ink bottles that came with your product.
   Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties.

2. Remove the cap while keeping the ink bottle upright; otherwise ink may leak.

3. Do not knock the ink bottle, otherwise the ink may leak.

4. If the ink does not start flowing into the tank, remove the ink bottle and try reinserting it.
   Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.

Checking Print Quality

Print head cleaning uses some ink from all ink tanks.

Refilling Ink

If there is ink remaining in each bottle, refill the ink tank

Connecting to a Computer

Visit the website to install software. Windows users can also install software using the CD supplied. http://epson.sn/

Guide to Control Panel

Buttons and Functions

Reading the Indication Lights

Checking Ink Levels and Refilling Ink

Check the ink levels. If any of the ink levels are below the lower line, see steps A to H in “2 Charging Ink” to refill the tank.
To confirm the actual ink remaining, visually check the ink levels in all of the printer’s tanks. Prolonged use of the printer when the ink level is below the lower line could damage the printer.

Ink Bottle Codes

For Europe

For Australia and New Zealand

For Asia

Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
Use of genuine Epson ink other than the specified ink could cause damage that is not covered by Epson’s warranties.

Clearing Paper Jam

Back

Inside the Printer

Storing and Transporting

• Be sure to keep the ink bottle upright when tightening the cap. Place the printer and the bottle in a plastic bagseparately and keep the printer level as you store and transport it. Otherwise ink may leak.
• If print quality has declined the next time you print, clean and align the print head.

Important Safety Instructions

• Use only the power cord that comes with the printer. Use of another cord may cause fire or shock. Do not use the cord with any other equipment.
• Be sure your AC power cord meets the relevant local safety standard.
• Except as specifically explained in your documentation, do not attempt to service the printer yourself.
• Do not let the power cord become damaged or frayed.
• Place the printer near a wall outlet where the power cord can be easily unplugged.
• Do not place or store the product outdoors, near excessive dirt or dust, water, heat sources, or in locations subject to shocks, vibrations, high temperature or humidity.
• Take care not to spill liquid on the product and not to handle the product with wet hands.
• Keep ink bottles and the ink tank unit out of the reach of children and do not drink the ink.
• Do not shake an ink bottle too vigorously or subject it to strong impacts as this can cause ink to leak.
• Be sure to keep the ink bottles upright and do not subject them to impacts or temperature changes.
• If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately. If ink gets into your mouth, see a doctor right away

FOR MORE INFO

• For outside Europe:http://support.epson.net/
• For Europe:http://www.epson.eu/Support

References

• support.epson.net
• Epson Global Portal
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>