EUHOMY BR-115 Beverage Cooler Instruction Manual

: June 17, 2024
: Euhomy

EUHOMY BR-115 Beverage Cooler

EUHOMY-BR-115-Beverage-Cooler-fig-1

Product Information

Specifications

Product: Euhomy Beverage Cooler
Brand: Euhomy
Product Type : Compact Appliance
Usage: Storing and Cooling Beverages or Wines
Installation: Freestanding
Capacity: [Capacity]
Dimensions: [Dimensions]

Safety Precautions

Before using the Euhomy Beverage Cooler, please read and follow these safety precautions:

Do not store or install the appliance outdoors.
This appliance is designed for storing and cooling beverages or wines. Do not store perishable food, medicine, or other medical products.
Place the appliance on a hard and level floor that is strong enough to support it when fully loaded.
Ensure at least 5 inches (127mm) of space between the back and sides of the appliance for proper ventilation.
Avoid placing the cooler near a stove or furnace. If unavoidable, use an insulation board.

Operation and Controls

Proper Use of Beverage Cooler
The Euhomy Beverage Cooler is designed to store and cool beverages or wines. Please follow these guidelines for proper use:

Make sure the appliance is installed on a level surface.
Plug in the cooler to a power outlet.
Use the temperature controls to set the desired temperature.
The display screen will show the current temperature and can be adjusted using the temperature buttons.
Allow the cooler to cool down for a few hours before placing beverages inside.
Ensure proper ventilation by leaving space around the cooler.

Introduction to the Beverage Cooler’s Functions
The Euhomy Beverage Cooler offers the following functions:

Temperature Setting: Use the increase and decrease temperature buttons to adjust the temperature one degree at a time.

FAQ (Frequently Asked Questions)

Can I store perishable food in the beverage cooler?
No, the Euhomy Beverage Cooler is designed specifically for storing and cooling beverages or wines. It is not suitable for perishable food, medicine, or other medical products.
How should I clean the beverage cooler?
To clean the beverage cooler, unplug it from the power outlet and remove all items from inside. Use a mild detergent and warm water to clean the interior and shelves. Rinse with clean water and dry thoroughly before plugging it back in.
What is the capacity of the beverage cooler?
The capacity of the Euhomy Beverage Cooler is not specified in the provided text. Please refer to the product specifications or user manual for detailed information on capacity.
How do I adjust the leveling legs of the appliance?
To level the appliance, locate the leveling legs at the bottom of the cooler. Use a wrench or pliers to turn the legs clockwise to raise the cooler or counterclockwise to lower it. Adjust the legs until the appliance is level on the floor.

INTRODUCTION

Thanks for making a purchase on Euhomy!

We hope to provide you with sincere service.If there is anything missing or wrong with your order, If you have any doubts about using our beverage cooler. PLEASE reach out to us. Email-(euhomy@hotmail.com)or Facebook-@Euhomy).
Euhomy team will answer your doubts online for 24 hours. Your satisfaction is our ultimate goal. We’ d appreciate if you could share your experience with other shoppers on Amazon. We’ d love to make it right for you! If you just want to see the problem description, you can directly see the last page, or contact us directly Email: euhomy@hotmail.com Our Mission: To be the most trusted appliance brand, Creat compact and practical appliance to better your life.
Five years ago, we founded Euhomy by a team of young people. Initially, we mainly sold ice maker, mini fridge, upright freezer, which are generally recognized by consumers. We are committed to providing a variety of compact and practical appliances, while taking into account the high-end design of the product. When we launched Euhomy for the first time,we are committed to the quality of all our every product and the satisfaction of customer needs first.
Now we’re thrilled to be the leading refrigeration and compact appliance company, offering unique and necessary appliances loved by people continent-wide. Euhomy wants consumers to enjoy the most practical products at the most cost-effective price. Our brand philosophy has always been around, intelligent design, intelligent technology and high- end design.We would love to hear from you about how we can better innovate your life.

Safety Precautions

SAVE THESE INSTRUCTIONS / For Household Use Only

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance
Do not use extension cords or ungrounded (two prong) adapters.
This appliance is intended to be used in households and similar applications such as: staff kitchen areas in shops, offices and other working environments; hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.
Do not pull the power cord when pulling the power plug of the beverage cooler. Please firmly grasp the plug and pull it out from the socket directly.

WARNINGS RELATED TO ELECTRICITY

Do not damage the power cord under any condition.
Please use a dedicated three-hole power socket which is 15A or more and not shared with other electrical appliances.
Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
The beverage cooler uses AC power supply of 115V/60 Hz. If the voltage fluctuation exceeds the range of 115V +- 10%, it can cause accidents or damage the cooler.
In case of leaking gas, turn off the leaking valve and open your doors and windows. Do not unplug the cooler yourself, as it may cause a fire. Contact customer support.
For your safety, don’ t place electric devices on top of the cooler like microwaves or electric kettles, and don’ t store your beverage cooler inside pantries.

WARNINGS RELATED TO USE

Make sure there is ample ventilation space surrounding the beverage cooler.
Be careful not to get fingers or dangling accessories caught in the cooler door.
This cooler and its packaging are not intended to be played with or used by children. If a child is using the cooler, it must be with a dult supervision to avoid injury.
Keep the cooler out of moist, damp or humid environments and situations so as not to damage the electrical insulation.
Do not use base, cooler door, etc. as pedal or support.
Do not place heavy objects on top of the cooler to prevent accidental damage or injury.

WARNINGS RELATED TO PLACING ITEMS

Do not put flammable, explosive, volatile and highly corrosive items in the cooler to prevent damages to the product or fire accidents.
Do not place flammable items near the cooler to avoid fires.
This product is for household refrigeration appliances, mainly used in the storage of beverage, not for other purposes, such as storage of blood, drugs and biological products.
Do not cover or close ventilation and exhaust holes.

PRODUCT OVERVIEW

PLACEMENT

Before using the cooler, remove all packaging materials including bottom cushions, foam pads, and tape inside the cooler, tear off the protective film on the door and the cooler body.
Make sure the cooler is placed in a well-ventilated indoor place; on flat, sturdy ground (rotate left or right to adjust the wheel for levelling if unstable).
The room for cooler should become larger with more refrigerant in cooler, with 8g refrigerant corresponding to 1m3 spaces. The content standards of refrigerant are labels in name board on backboard of cooler.
Avoid putting the cooler in direct sunlight or too close to a heat source -keep a safe distance of at least 30cm between the cooler and a stove or furnace if it can’ t be avoided. We also advise applying an insulation board in that case.
Keep a circulation space of at least 4cm on both sides of the cooler to preserve power.

Installation

IMPORTANT SAFETY INSTRUCTIONS

WARNING
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic pre-cautions:

Read all instructions before using the appliance.
DANGER or WARNING: An empty beverage refrigerator can be a hazardous for children or small pets. If disposing of the beverage refrigerator, remove gasket seals, latches, lids or the entire door from your unused appliance, or take other action to ensure the beverage refrigerator is harmless.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire haz-ard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any oth-er
appliance. The fumes can create a fire hazard or explosion.

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.

INSTALLATION OF YOUR APPLIANCE

The appliance is designed for freestanding installation.
WARNING: Do not store or install the appliance outdoors.
CAUTION: This appliance is designed for storing and cooling beverage or wines. Do not store perishable food, medicine or other medical products.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
To level your appliance, adjust the leveling legs at the bottom of the appliance if needed.
Allowance of at least 5 inches (127mm of space between the back and sides of the appliance are sug- gested, which allows the proper air circulation to cool the compressor and condenser.
We do not recommend installing the appliance on carpet.
Do not install the appliance near an oven or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the appliance behind a cabinet door or block the base grille. Extreme cold ambient temperatures may also cause the appliance not to perform properly.
Avoid locating the appliance in area that may be exposed to excessive moisture.
Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a qualified electrician or an authorized service center.

INSTALLATION LOCATION
Your beverage refrigerator should be conveniently located for day-to-day use in a dry, well-ventilated room. Do not install the appliance where the temperature will go below 60°F or above 90°F, because it will not main-tain proper temperatures. Be sure to install your beverage refrigerator on a floor strong enough to support it when it is fully loaded.

FREESTANDING INSTALLATION
A freestanding installation will allow you to install the beverage refrigerator in any place you desire provided that the required clearance space around the appliance is respected. In every setting, there must be an ad-equate ventilation and a ccess for service. Never install or operate the unit in an enclosed area, such as a closed cabinet. Allowance of at least 5 inches (127mm) of space between the back and sides of the appliance are suggested, which allows the proper air circulation to cool the compressor and condenser.

ELECTRICAL CONNECTION
WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or contact W hynter Service Department.

This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental i njury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD
Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

Operation and Controls

PROPER USE OF BEVERAGE COOLER
Energy Conservation

The cooler should be placed in a room that is dry and ventilated. The cooler cannot be placed under direct sunlight or next to heat source (such as a radiator, stove, etc.), and a suitable insulation board must be applied if necessary.
Try to shorten opening time of cooler’s door.
Avoid putting warm beverages in the cooler.

INTRODUCTION TO THE BEVERAGE COOLER’S FUNCTIONS

Display Controls
When turning on for the first time, the display screen will be a full display for 3 seconds and the startup tone will ring.

Standby Mode
To activate standby mode, hold the standby button for 3 seconds. You will hear a beep and the display area will be cut off. To deactivate standby mode, press the button again. You will hear a beep and the standard display will show.

Lighting
Press the lighting button to turn the light on or off.

Temperature Setting
Press the increase temperature button to increase the temperature one degree at a time. Press the decrease temperature button to decrease the temperature one degree at a time.

Memory Function
If turned off, this cooler will remember any settings in place and will work according to those settings once it’s turned on again.

Fault Indicators
If any of these indicators are displayed it means the cooler has the following issues.

EUHOMY-BR-115-Beverage-Cooler-fig-3

Operation and Controls

It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C) and below 90°F (32°C). If the ambient temperature is above or below recommended temperatures, the performance may be affected. For example, placing your appliance in extreme cold or hot conditions may cause interior temperatures to fluctuate.

SETTING THE TEMPERATURE
To control the internal temperature, turn on the temperature control

INTERIOR LIGHT
To turn on/ off the interior light, flip the switch inside the appliance.

INTERNAL FAN
This beverage refrigerator is equipped with an internal fan that prevents uneven temperature distribution, ensuring all of your beverage reaches your desired temperature .

PARTS:

Temperature Control
Light Switch
Interior Light
Internal Fan

REVERSING THE DOOR SWING

Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the beverage refrigerator from power.

To remove the door:

Using a flathead screw driver carefully pry the top hinge cover off.
Using a Phillips screwdriver, remove the screws and take off top hinge. Keep the parts together and set them aside.
Lift the door off the bottom hinge and set the door aside.
Remove the bottom hinge by removing the screws with a Phillips head screwdriver.

To install the door:

Using a flathead screwdriver, remove the plugs and cover from the opposite cabinet top corner and from the door. Set aside.
Install the bottom hinge at the opposite side corner and fasten the screws.
Position the door on the bottom hinge.
Align the door on the bottom hinge and install the top hinge.
Push the plugs and covers into the corresponding holes.

LEVELING THE APPLIANCE
It is important for the beverage refrigerator to be leveled in order to work properly. It can be raised or lowered by rotating each of the feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until the beverage refrigerator becomes level .You may need to make several adjustments to level it. We recommend using a carpenter’s level to check the machine.

Place a carpenter’s level on top of the product to see if the beverage refrigerator is level from front to back and side to side.
Adjust the height of the feet as follows: Turn the leveling feet to the right to lower that side of the refrigerator. Turn the leveling feet to the left to raise that side of the refrigerator.
IMPORTANT: Once you are ready to install, you must adjust the feet to level the beverage refrigerator .

DEFROSTING
The ice build-up on the inner back wall of| your cooler will automatically be defrosted in a comprossor-off cycle. When you press the button(off),the comprossor and circulation fan stops running.While defrosting is in process.Defrost water will drain out of the cooler,passing through the drain outlet in the inner back wall into a drain pan located above the comprossor.The water will evaporate from the drain pan on its own.

NORMAL SOUNDS
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing operating noise. Even when the compressor cuts out, noises caused by changes in temperature and pressure are unavoidable. Operating noise will be most audible immediately after the compressor comes on. It becomes quieter as the operating period continues.
The following noises are normal and occur from time to time:

Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,
Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on.
Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature vari-ations,
Fan operating sound, to circulate the air within the refrigerator cabinet.
Unusual noise is normally the result of improper installation.
Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be heard more acutely. However, this is due to the surrounding architecture and not to the unit.
NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is located, as well the specific type of models. Our appliances are in line with international standards for such ap-pliance and in line with the latest technical developments. Please remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.

Maintenance

DISCONNECTING THE BEVERAGE COOLER
Unplug the power plug from the socket to disconnect the cooler

CLEANING YOUR BEVERAGE COOLER
Dusting behind the cooler and on the ground will improve the cooling effect and save energy. The interior of the cooler should be cleaned to avoid any odor. Follow the cleaning procedure below.

Unplug the cooler.
Wipe the door seal with warm water.
Use soap and warm water to clean the cooler.
Reconnect the cooler when the cooler is clean and dry.
Note: Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid or alkaline items as this may damage the cooler surface and interior.

FREQUENTLY ASKED QUESTIONS
I’m hearing some sounds, what’s up with that?
Buzzing or any gurgling sound is normal as that can be a result of the unit working properly or refrigerating fluid flowing through the pipeline.

EUHOMY-BR-115-Beverage-Cooler-fig-6

Warranty-1 year

Euhomy offers a limited 1-year warranty (“warranty period”) on all of our products purchas ed new and unused from Euhomy company, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workm anship during the warranty period. The warranty does not apply where damage is caused b y other factors, including without limitation: (a) normal wear and tear; (b) abuse, mishandlin g, accident, or failure to follow operating instructions; (c) exposure to liquid or infiltration of f oreign particles; (d) servicing or modifications of the product other than by Euhomy; (e) com mercial or non-household use.
The Euhomy warranty covers all costs related to restoring the proven defective product through repair or replacement of any defective part and necessa ry labor so that it conforms to its original specifications. A replacement product may be provi ded instead of repairing a defective product. Euhomy’s exclusive obligation under this warr anty is limited to such repair or replacement.A receipt indicating the purchase date is requir ed for any claim, so please keep all receipts in a safe place.Although greatly appreciated, th e product registration is not required to activate any warranty and product registration does not eliminate the need for the original proof of purchase.The warranty becomes void if atte mpts at repair are made by non-authorized third parties and/or if spare parts, other than tho se provided by Euhomy, are used.
You may also arrange for service after the warranty expires at an additional cost.These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you have an issue with a hOme® product, p lease contact us (euhomy@hotmail.com), and we will do our best to resolve it for you.This warranty gives you specific legal rights, and you may have other legal rights which vary fro m state to state, country to country or province to province. The customer may assert any s uch rights at their sole discretion.