EUHOMY IM-F Countertop Ice Maker Instruction Manual

EUHOMY IM-F Countertop Ice Maker Instruction Manual

EUHOMY IM-F Countertop Ice Maker Instruction Manual

Model:IM-F
Email:euhomy@hotmail.com
Facebook:@Euhomy
Congratulations on your new Euhomy product. To ensure proper operation. please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.

Congratulations

Dear Customer, So lucky to meet you guys !!!
Thanks for making a purchase on Euhomy!
We hope to provide you with sincere service. If there is anything missing or wrong with your order ，If you have any questions about using our Ice Maker. PLEASE reach out to us.
Email-(euhomy@hotmail.com) or Facebook-(@Euhomy).

The euhomy team will answer your doubts online for 24 hours. Your satisfaction is our ultimate goal. We’d appreciate it if you could share your experience with other shoppers on Amazon. We’d love to make it right for you! If you just want to see the problem description, you can directly see the tenth page, Or contact us directly. Email:euhomy@hotmail.com

Our Mission: To be the most trusted appliance brand, Creat compact and practical appliances to better
your life.

Don’t forget to register your product at www.euhomy.com/register for updates, warranty, and other relevant information.

Q &A

1. How often do I need to clean my ice maker?
   Depending on your usage habits, if you use it frequently, it is recommended that you clean it at least once a week. Failure to clean the machine will cause scale accumulation, which will eventually block the pump and cause the product to fail to work.

2. How should I clean the machine?
   It is recommended to use lemon water or weak acid vinegar for cleaning. Drain immediately after cleaning, and then clean it with pure water. It is recommended to drain water at least once every three days. Draining can not only ensure that the the  hardness of the water is not too high, but also ensure that impurities can be discharged well, and it is not easy to produce scale in the water tank.

3. Why is my ice cube cloudy?
   It means that your water quality is turbid. It is recommended to use drinking water and distilled water. If your water quality problem is serious, it is recommended that you install a water filter kit.

4. Can I put milk and juice into the water tank to make ice cubes?
   It is recommended that you do not do that. Our research has found that the high concentration of milk and beverages can easily block the pump and reduce the life of the pump. At the same time, the protein in milk is prone to calcification, which chemically reacts with the PU water pipe inside the machine, which easily breaks it, making the product unable to continue working.

5. Why does my ice cube melt easily?
   Because the ice maker is not a refrigerator, it does not have a heat preservation function. The high ambient temperature in summer will accelerate the melting of ice cubes. You can close the lid of the machine to keep the internal temperature. Some customers also put electric fans on the side of the machine to blow away the hot air around, thus solving the problem, you can try. However, if you are not using ice cubes for a long time, we recommend removing them from the ice basket and storing them in the refrigerator.

6. Why is my ice so thick and difficult to fall from the ice tray? What should I do?
   It may be that your ice-making time is set too long, or it may be that the temperature of your environment is low. You can reduce the time to 0 or -6 by pressing the minus key on the touch panel.

7. Why does the ice cube I made have a plastic smell?
   The ice cube itself has no taste. If you feel there is a plastic smell, try to clean the inside of the machine with lemon water, then run a few cycles, and finally rinse with distilled water.

8. Why is there noise in the operation of my machine?
   There is a faint sound when the machine is running. Closing the lid can reduce the noise. If the water pump makes noise during use, it is recommended to turn off the machine first, and then turn on the machine after cleaning the filter in the water tank to observe whether the noise disappears.

9. Why is water leaking from my machine?
   It may be that the PUA tube inside the machine fell off during transportation. You can remove the back cover of the machine and connect it by yourself. If you don’t know how to operate, please contact the Euhomy team. We will give you a  professional video to help you solve the problem.

10. Why is there water flowing but not making ice?
    If you make sure that the ambient temperature is not abnormal, then the refrigerant of the machine has leaked. Please provide a video or picture and send it to us, and the Euhomy team will help you.

Safety Precautions

IMPORTANT SAFETY TIPS
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance.

• Do not operate this or any other appliance with a damaged cord.
  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent a similarly qualified person in order to avoid a hazard.
  This ice-maker must be positioned so that the plug is accessible.
  Connect to properly polarized outlets only.No other appliances should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.

• Do not run the power cord over carpeting or other heat insulators.Donotcoverthecord.Keep cord away from traffic areas, and do not submerge in water.

• We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. Ifyoumustusean extension cord, use No.14AWG minimum size and rated no less than 1875watts.

• Unplug the icemaker before cleaning or making any repairs or servicing.

• Exercise caution and use reasonable supervision when the appliance is used near children.

• Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and make sure that there is at least 4 inches of space between the back of your unit and the wall. Keep a minimum
  distance of 4 inches on each side of your unit free.

• Do not use other liquid to make the ice-cube other than water.

• Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.

• Do not tip over.

• If the ice maker is brought in from outside in the wintertime, give it a few hours to warm up to room temperature before plugging it in.

Risk Of Fire or Explosion- Flammable Refrigerant Used

• Do Not UseMechanical Devices To Defrost IceMaker. Do Not Puncture Refrigerant Tubing.

• To Be Repaired Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing

• Consult RepairManual/Owner’s Guide Before Attempting To Install or Service This Product. All Safety
  Precautions Must be Followed.

• Dispose Of Property In Accordance With Federal Or Local Regulations.

• Follow Handling Instructions Carefully.

• The ice maker should be installed in accordance with the safety standard for Refrigeration Systems, ASHRAE15. The ice maker shall not be installed in corridors or hallways of public buildings.

• If the unit is with the problem need to be maintained, that replacing with like components and that servicing shall be done by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.

Note: The wires in this mains lead are colored in accordance with the following code: Green or Green with a strip

COLOR|

WIRING

---|---

Yellow

| Grounding

White

|

Neutral

Black|

Live

To avoid a hazard due to the instability of the appliance, it must be placed at an even or flat surface.

Operation & Installation

ASSEMBLY AND PARTS

1. Water reservoir cover

2. Unit top cover

3. Water separator pipe

4. Evaporator

5. Ice basket

6. Ice scoop

7. Transparent window

8. ControlPanel：
   A.Timer button
   B.Power button
   C.LCD Display area
   1. Ambient temp and ice-making countdown symbol：when display show, ice- making countdown, when the display show<℉>， means ambient temp.
   2. Ice making and Ice harvest symbol： when the symbol is running, the unit is making icecube, when the symbol flash the unit is ice harvest.
   3. ON/OFF symbol.
   4. Error code E 1-Ambient temp sensor breakdown. E 2-refrigerating  tube sensor breakdown5.Lack water warning symbol.
   6. Ice full warning symbol.
   7. Time setting display area.When show， timer unit  ON/OFF， when show， settings making time.
   D.Ice making and timer reduce.
   E.ice making and timer increase.

9. Hot Air Outlet

10. Water draining port： To drain out the water from the unit.

UNPACKING YOUR ICE MAKER

• Remove the exterior and interior packaging. Check that the ice basket and ice scoop is included any parts are missing, please contact our customer service.
• Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it.
• Find a location for your ice maker that is protected from direct sunlight and other sources of heat(ie.：stove, furnace,  radiator). Place the ice maker on a level surface. Make sure that there is at least 6 inches of space between the back and sides of your ice maker and the wall.
• Allow one hour for the refrigerant fluid to settle before plugging the icemaker in.
• The appliance must be positioned so that the plug is accessible.

Note: Fill with potable water only.

CONNECTING YOUR ICE MAKER

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call our customer service.

This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug that mates with standard three- prong wall outlets to minimize the possibility of electric shock

Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under any circumstances, cut or remove the third (ground) prong from the power cord. Any questions concerning power and /or grounding should be directed toward a certified electrician . This appliance requires a standard 110-120volt, 60Hz electrical outlet with three-prong ground.

Operation & Installation

OPERATION PANEL AND DISPLAY AREA

Remove the cover of the water reservoir and pour potable water into the water reservoir.
And be sure to keep the water level below the max. level with FULL mark displayed in the following picture. Then move back the cover at once to avoid foreign matter entering.

Note :

• Do not pour the water into the internal water tank located underneath the ice basket. This tank is not big enough and will affect the ice-making performance.
• When you plug the unit, the power symbol< >will fash. Press the <ON/OFF> button, the unit will start making ice cubes, ice-making symbol< >will keep running. The left up corner of the display area will show the ambient temp, i.e:80℉means the ambient temp is 80 ℉. After several mins, this area will show a flash number, the ice making will countdown, i.e:10M means the ice making will finish 10 mins later.
• When ice maker harvests, symbol< >flash, the water will flow from the topwater reservoir to bottom water tank through the solenoid valve, the symbol<>will be on, when the water in the bottom water tank is full, the symbol<>will be off, then the next ice making cycle start again. When there is no water in the water reservoir, the symbol<>will keep on. Turn off the unit and fill water again, then restart the unit to make an ice cube. Or fill water directly and wait 20mins, the unit will restart.

Operation & Installation

• Remar : The ice-making cycle lasts about 13 to 25 minutes, depending on the ambient temperature. And for the first time, according to the initial water temperature, ice-making last time will be a little longer. In the extreme hot room temperature, the ice-making time maybe Vary a lot, but it will not exceed 35 minutes.
  If you think the ice cube is not thick enough, during ice making, press the<+>and<->to set the ice-making lead time. Press one time and the ice-making cycle will increase or Reduce one min, 6minmost. This can only start from the news cycle.

• When Ice Full symbol < >is on, the unit will stop, take out the ice cube inside, the unit will start working again.
  If press the button<ON/OFF>more than 5s, when the ice maker is working, the unit will start the harvest. Press the button<ON/OFF>, the unit will turn off.
  Timer setting. Unit on timer setting, When the unit is working, the timer setting the unit off. Unit off Time resting, When the unit is off, timer the unit on.
  Press thebutton, the display will show<1H>, and then press <+> and <-> to set the time. During the setting, the His flash, after 5s, the H will keep on, and the unit will in your Timers etting …

• Water Drain: take off the drain plug cap on the back of the unit，take out the silicon plug, then drain the water
  inside. It is better than exchanging water every 24hours. and cleaning the unit every 3days.
  

Note :

• Make sure the water tank, water filter, and water separator pipe is not blocked, clean them.
• The water temp will affect the ice-making capacity. The lower temp, the more ice cubes are produced.
• The cooler the ambient temp, the more ice cube produce.
• Always use good quality water to make sure the pump works well. Bad quality water will cause pump noise but doesn’t affect the unit’s working.
• The compressor restart 3mins later if you turn off the unit.

Tips & Maintenance

CLEANING AND MAINTAINING YOUR ICE MAKER

Before using your ice maker, it is strongly recommended to clean it thoroughly.

• Take out the ice basket.

• Clean the interior with diluted detergent, warm water, and a soft cloth

• Then use the water to rinse the inside parts, and drain out the water from the draining port by unplugging the drain cap on the back

• The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.

• Dry the interior and exterior with a soft cloth.

• When the machine is not in use for a long time, open the water drain cap to drain the water completely out from the water reservoir.

• After using your ice maker for a long time, we also suggest you should clean your unit.

• Especially to the water separator pipe and the water filters, you must clean them periodically.

• If the water separator pipe is blocked and there is no water flowing down when you listen to the compressor and the water pump inside is still working, please turn off the unit first and disassemble this pipe down, and clean it. Clean each hole on the pipe wall displayed in the following picture. After cleaning， install back the water separator pipe and be sure the right terminal of the pipe connects to the silicone pipe well and as original.
  

• For both the water tank and the big water reservoir, clean them with diluted detergent, warm water, and a soft cloth. Then use the water to rinse the inside, and drain out the water from the draining port by unplugging the drain cap on the back. It will help you keep the unit and ice-cube hygienically, and also make the unit work normally.

• When cleaning, if find that the ice cube is left on the evaporator and can not be taken out easily, you can turn on the unit to let the unit enter the ice making process, then press the “ON/OFF” button for more than 5 seconds to let the unit start ice harvest process to melt the ice cube. It will help you remove the hard ice cube.

• How to drain out the water from the internal tank and big water reservoir completely.
  Because the water in the big water reservoir is stopped to drain port by the water valve, if you want to drain away all the water, please plug on the unit and but don’t start the unit, then remove the drain port cap at the back. Wait some minutes, all of the water will flow out.

Specfcations

TECHNICAL PARAMETERS

1.130z/32g

Design Pressure|
High Side| 260Psig
Low Side| 88Psig
Net Weight| 11kg
Enclosure| Stainless

CIRCUIT DIAGRAM

Warranty

Euhomy offers a limited 1-year warranty (“ warranty period” ) on all of our products purchased new and unused from Euhomy company, with original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts, or workmanship during the warranty period. The warranty does not apply where damage is caused by other factors, including without limitation:
(a) normal wear and tear;
(b) abuse, mishandling, accident, or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles;
(d) servicing or modifications of the product other than by Euhomy;
(e) commercial or non-household use.

The Euhomy warranty covers all costs related to restoring the proven defective product through repair or replacement of any defective part and necessary labor so that it conforms to its original specifications. A replacement product may be provided instead of repairing a defective product. Euhomy’s exclusive obligation under this warranty is limited to such repair or replacement. A receipt indicating the purchase date is required for any claim, so please keep all receipts in a safe place. Although greatly appreciated, the product registration is not required to activate any warranty and product registration does not eliminate the need for the original proof of purchase. The warranty becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts, other than those provided by Euhomy, are used.

You may also arrange for service after the warranty expires at an additional cost. These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you have an issue with a Euhomy product, please contact us (euhomy@hotmail.com), and we will do our best to resolve it for you.

Troubleshooting –euhomy@hotmail.com

PROBLEM

| POSSIBLE CAUSE|

SOLUTION

---|---|---
<> is on| Lack of water| Turn off the unit and add water to level, then restart the unit.
< > Is on| Too much ice cube in the basket| Remove the ice cube in the basket.
The water reservoir has water but
< > is on| The inlet solenoid valve breakdown| Need the technical service person to maintain.
< El> is on| Ambient temp sensor breakdown| The unit can still work, change to a new sensor.
< E2> Is on| Refrigerating tube sensor breakdown| The unit can still work, change to a new sensor.
No water in the water Separator pipe| The holes are blocked| Use slim wire to prick each hole, till The water can flow out easily.
Water filter block| Clean the water utter.
Ice cube thick and cairn’ t Dropdown| Ice making cycle too long| Press <->to reduce the ice-making time.
Ice cube thin| Ambient temp too high| Move the unit to a cool place.
Water temp too high| The water temp should be no more morethan25°C (77°F).
making short rt| Press<+>to increase the ice-making Time.
Unit work but no Ice cube| Ambient temp Is high or the water temp is high| Move the unit to somewhere ambient Temp lower than30 t (86’F ) fill cool water.
Refrigerant system leakage| Need the technical service person to maintain.
Refrigerant system block| Need the technical service person to maintain.

Thank you for selecting our quality appliance. Please be sure to read this user manual carefully before using it. Any questions, please  contact the professional service for help.

Model : IM-F
Email: euhomy@hotmail.com

| |
---|---|---
Like us| Euhomy| Scan me
https://qrco.de/bbQEhb|  | https://qrco.de/bbUjVe

FAQS

how many watts does it used?

It uses 240 watts at max. The device 2 amps at 120vac.

Will the machine shut off when the water runs out?

The machine will shut off when the water runs low before it will ever run out. If you are not going to use this ice maker for a while you may wish to pull the plug on the bottom to drain the residual water out. Love our Euhomy ice maker.

If some ice mels, will the water just be made into more ice?

yes, the ice will keep melting back into the water tank unless you move the cubes to the freezer. It makes the ice ,it does not keep it frozen

Will the machine shut off when the water runs out?

The machine will shut off when the water runs low before it will ever run out. If you are not going to use this ice maker for a while you may wish to pull the plug on the bottom to drain the residual water out. Love our Euhomy ice maker.

Where is the “water level line” located on the ice-maker?

The water is located under the basket where the ice collects. In the front of the machine, under the lid.

This machine contain cfc refrigerants gas? what refrigerants contain?

It has the refrigerant has to be left set up right for several hours for it to settle before using it

Can this be used 24hours a day as a primary ice maker?

There does not appear to be a place to plug in a water source. As a result, to use it as primary ice source, you will need to fill up the reservoir by hand when it empties. In addition, it does not have a refrigerant so I’ve will melt into the reservoir is no removed to a separate freezer.

Is it oil or coolant that leaks into the ice tray? Chemical coated inside of water basin and ice maker tray after 2 years of use.

We have owned our Euhomy Ice Maker for about six weeks. So far, we have not experienced any leaks of oil or coolant into our ice trays. We are very satisfied with this purchase.

Does this ice maker work in ghana, west sfrica?

Ours came with 120 VAC power for United States

Does it have a filter that needs to be changed ?

No

Why is green light still blinking after you shut it off?

The machine is not making ice after water is entered into it.

where does it ship from?

Ships from the seller, who gets their supply from China.

Can it be turned on automatically once the unit gets ac power? that is, without the need to push the on button?

No, you have to press an ON button to turn it on.

Is this ice maker returnable?

Yes

What watts?

Between 180-240 watts. Power consumption is 1.5 amps idle and 2 under full load at 120 volts.

VIDEO

www.euhomy.com

References

• ONLY® - Fashion Clothes for Women
• outlet.be
• Product Warranty Activation – Euhomy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>