EPSON EB-L1505U 3LCD Projector User Guide
- June 17, 2024
- Epson
Table of Contents
EPSON EB-L1505U 3LCD Projector
WHAT IN THE BOX
DIMENSION
INSTALLATION INSTRUCTION
- After attaching a lens unit that differs from the previous one, a message is displayed when the projector is turned on. Select Yes to calibrate the lens.
Only when using the following lens. ELPLS04, ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, ELPLL07
Set the Lens Type in the Configuration menu according to the lens you are using.
-
Extended – Operation – Advanced – Lens Type
-
When you turn on the projector for the first time, the message “Do you want to set the time?” is displayed. Select Yes and set Date/Time. s User’s Guide If you set it later, select No.
-
a=24%, b=10% (EB-L1505U/EB-L1500U, ELPLU03/ELPLW05)
-
a=60%, b=18% (EB-L1505U/EB-L1500U, ELPLU04/ELPLW06/ELPLM09/ELPLM10/ELPLM11/ELPLL08)
-
a=67%, b=30% (EB-L1405U/EB-L1300U/EB-L1200U/EB-L1100U)
Lens Projection Distance Table
- Screen size (inches)
- Projection distance (Minimum: Wide to Maximum: Tele)
- Distance from the center of the lens to the bottom of the screen
EB-L1505U/EB-L1500U
The lens for projectors with built-in lens is ELPLM09.
16:10
Projection Lens
| (cm)| (cm)
---|---|---
Minimum| Maximum
ELPLM09/ELPLS04
| ****
x 3.45 – 8.18
| ****
x 5.57 – 8.02
| (+) (-)| x 0.14
x 1.48
ELPLU03
| ****
x 1.05 – 3.49
| ****
x 1.26 – 3.28
| (-)
(-)
| x 0.35
x 1.00
ELPLU04
| ****
x 1.42 – 5.65
| ****
x 1.71 – 5.52
| (+) (-)| x 0.14
x 1.48
ELPLW05
| ****
x 1.70 – 7.86
| ****
x 2.35 – 5.80
| (-)
(-)
| x 0.35
x 1.00
ELPLW06/ELPLW04| x 2.61 – 7.51| x 3.55 – 6.99| |
ELPLM10/ELPLM06| x 5.33 – 13.21| x 8.10 – 13.08| (+)| x 0.14
ELPLM11/ELPLM07| x 7.81 – 23.86| x 11.83 – 23.55| (-)| x 1.48
ELPLL08/ELPLL07| x 11.59 – 31.52| x 16.21 – 31.81| |
ELPLR04| x 1.56 – 6.62| –
16:9
Projection Lens
| (cm)| (cm)
---|---|---
Minimum| Maximum
ELPLM09/ELPLS04
| x 3.55 – 8.18| x 5.73 – 8.02| (+) (-)| x 0.21
x 1.45
ELPLU03
| x 1.08 – 3.49| x 1.29 – 3.28| (-)
(-)
| x 0.29
x 0.96
ELPLU04
| x 1.46 – 5.65| x 1.76 – 5.52| (+) (-)| x 0.21
x 1.45
ELPLW05
| x 1.75 – 7.86| x 2.42 – 5.80| (-)
(-)
| x 0.29
x 0.96
ELPLW06/ELPLW04| x 2.69 – 7.51| x 3.65 – 6.99| |
ELPLM10/ELPLM06| x 5.47 – 13.21| x 8.32 – 13.08| (+)| x 0.21
ELPLM11/ELPLM07| x 8.03 – 23.86| x 12.16 – 23.55| (-)| x 1.45
ELPLL08/ELPLL07| x 11.92 – 31.52| x 16.66 – 31.81| |
ELPLR04| x 1.60 – 6.62| –
EB-L1405U/EB-L1300U/EB-L1200U/EB-L1100U
The lens for projectors with built-in lens is ELPLM08.
16:10
Projection Lens
| (cm)| (cm)
---|---|---
Minimum| Maximum
ELPLM08| x 3.16 – 5.00| x 5.05 – 4.49| ****
(+) = x 0.24
(-) = x 1.58
ELPLU03| x 1.44 – 3.77| x 1.72 – 3.63
ELPLU04/ELPLU02| x 1.94 – 5.72| x 2.33 – 5.68
ELPLW05| x 2.32 – 7.65| x 3.21 – 5.81
ELPLW06/ELPLW04| x 3.58 – 7.32| x 4.87 – 8.32
ELPLM09/ELPLS04| x 4.73 – 8.00| x 7.59 – 7.93
ELPLM10/ELPLM06| x 7.30 – 13.04| x 11.03 – 13.01
ELPLM11/ELPLM07| x 10.70 – 23.67| x 16.14 – 23.47
ELPLL08/ELPLL07| x 15.87 – 31.85| x 22.11 – 31.62
ELPLR04| x 2.12 – 6.10| –
16:9
Projection Lens
| (cm)| (cm)
---|---|---
Minimum| Maximum
ELPLM08| x 3.25 – 5.00| x 5.19 – 4.49|
(+) = x 0.31
(-) = x 1.56
ELPLU03| x 1.48 – 3.77| x 1.77 – 3.63
ELPLU04/ELPLU02| x 1.99 – 5.72| x 2.39 – 5.68
ELPLW05| x 2.39 – 7.65| x 3.30 – 5.81
ELPLW06/ELPLW04| x 3.68 – 7.32| x 5.00 – 8.32
ELPLM09/ELPLS04| x 4.86 – 8.00| x 7.80 – 7.93
ELPLM10/ELPLM06| x 7.50 – 13.04| x 11.34 – 13.01
ELPLM11/ELPLM07| x 11.00 – 23.67| x 16.59 – 23.47
ELPLL08/ELPLL07| x 16.31 – 31.85| x 22.73 – 31.62
ELPLR04| x 2.18 – 6.10| –
Supported Resolutions
Computer signals (analog RGB)
Signal | Refresh Rate (Hz) | Resolution (Dots) |
---|---|---|
VGA | 60/72/75/85 | 640×480 |
SVGA | 60/72/75/85 | 800×600 |
XGA | 60/70/75/85 | 1024×768 |
WXGA
| 60| 1280×768
60| 1366×768
60/75/85| 1280×800
WXGA+| 60/75/85| 1440×900
WXGA++| 60| 1600×900
SXGA
| 70/75/85| 1152×864
60/75/85| 1280×1024
60/75/85| 1280×960
SXGA+| 60/75| 1400×1050
WSXGA+¹| 60| 1680×1050
UXGA| 60| 1600×1200
WUXGA²| 60| 1920×1200
- Only compatible when Wide is selected as the Resolution from the Configuration menu.
- Only compatible when VESA CVT-RB (Reduced Blanking) signal is input.
Component Video
Signal | Refresh Rate (Hz) | Resolution (Dots) |
---|---|---|
SDTV (480i) | 60 | 720×480 |
SDTV (576i) | 50 | 720×576 |
SDTV (480p) | 60 | 720×480 |
SDTV (576p) | 50 | 720×576 |
HDTV (720p) | 50/60 | 1280×720 |
HDTV (1080i) | 50/60 | 1920×1080 |
HDTV (1080p)* | 50/60 | 1920×1080 |
- Only for the input signals from the Computer port.
DVI-D/HDMI/HDBaseT
Signal | Refresh Rate (Hz) | Resolution (Dots) |
---|---|---|
VGA | 60 | 640×480 |
SVGA | 60 | 800×600 |
XGA | 60 | 1024×768 |
WXGA
| 60| 1280×800
60| 1366×768
WXGA+| 60| 1440×900
WXGA++| 60| 1600×900
WSXGA+| 60| 1680×1050
SXGA
| 60| 1280×960
60| 1280×1024
SXGA+| 60| 1400×1050
UXGA| 60| 1600×1200
WUXGA¹| 60| 1920×1200
QXGA²| 60| 2048×1536
WQHD²| 60| 2560×1440
WQXGA1, ²| 60| 2560×1600
SDTV (480i/480p)| ****
60
| ****
720×480
SDTV (576i/576p)| ****
50
| ****
720×576
HDTV (720p)| 50/60| 1280×720
HDTV (1080i)| 50/60| 1920×1080
HDTV (1080p)| 24/30/50/60| 1920×1080
4Kx2K²| 24/25/30/50/60| 3840×2160
4Kx2K (SMPTE)²| ****
24/50/60
| ****
4096×2160
- Only compatible when VESA CVT-RB (Reduced Blanking) signal is input.
- Only for the input signals from the HDMI and HDBase-T ports.
SDI
Signal
| ****
Refresh Rate (Hz)
| ****
Resolution (Dots)
| ****
Mode
| Color difference signals| Number of Bits| ****
Level
---|---|---|---|---|---|---
SDTV (480i)| 59.94| 720×480| ****
SD-SDI
| ****
YPbPr 4:2:2
| ****
10 bits
| ****
–
SDTV (576i)| 50| 720×576
HDTV (720p)| 50/59.94/60| 1280×720| ****
HD-SDI
HDTV (1080i)| 50/59.94/60| 1920×1080
HDTV (1080p)| 23.98/24/25/29.97/30| 1920×1080
HDTV (1080p)| 50/59.94/60| 1920×1080| 3G-SDI| A
- EB-L1505U/EB-L1500U/EB-L1405U only.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>