ezviz Mini O Indoor Internet WiFi Camera User Guide

Mini O
Quick Start Guide

Setup

Step 1 Power-on
Plug the power cable into the camera and to the power adapter and then into a power outlet, as shown in the figure below. The LED indicator will flash red and blue when the camera is ready for setup.

Step 2 Camera Setup

1. Create an user account
   – Connect your mobile phone to Wi-Fi.
   – Download and install the EZVIZ app by searching “EZVIZ” in App Store and Google Play™ .
   – Launch the app and register for an EZVIZ user account following the start-up wizard.

2. Adding a camera to EZVIZ
   – Log in the EZVIZ app.
   – From the EZVIZ app Home screen, tap “+” on the upper-right hand corner to go to the scan QR code interface.
   
   – Scan the QR Code on the bottom of the camera.
   – Enter the verification code located on the bottom of the camera.
   – Enter the correct time zone and DST information and tap “Finish” to finish setup.
   

3. Changing the default password
   After adding the camera, you are required to change the device password to ensure  your video security. The password is used for the Image Encryption. If you turn on the Image Encryption, you are required to input your password when you live view or play back the camera.
   – Go to the camera settings screen to change the default password.
   – Tap on “Change Password”.
   
   – Tap on “Edit”.
   – Enter the original verification code located on the bottom of the camera.
   – Enter the new password. Please use letters and numbers between 6 to 12 characters.

Installation

Step 1 Installing the Metal Plate (Optional)
Pick a clean and flat surface and secure the metal plate to the desired position with the foam stickers or screws (not included).
There’s a magnet piece inside the camera. You can skip this step if the surface is made of metal.
Step 2 Installing the Camera
Secure the camera magnetically to the metal plate or metal surface (see figure below).

Step 3 Completing Installation
Adjust the camera angle as required.

Appendix

Basics

modes: color (for daylight recording) and black and white with IR illuminator (for night condition).
LED Indicator| • Red and Blue Alternately: The camera is ready for Wi-Fi setup.
• Steady Blue: The camera is connected by a user.
• Slow Blue Flicker: The camera is running properly.
• Steady Red: The camera is starting.
• Slow Red Flicker: The Wi-Fi connection has failed.
• Fast Red Flicker: MicroSD card error.
microSD Card| For microSD card (not included with this product). You can purchase
Slot| separately. Recommended compatibility: Class 10, maximum space 128GB.
After inserting the card, you can record the event inside the camera.
RESET| Hold down the RESET button for 10 seconds while the camera is running, the camera restarts and all parameters are reset to default.
Power Input|  5V±10%
Speaker| Two-way talk.

Box Content

Installing Memory Card
Insert a microSD card into the slot until a click.

Initializing Memory Card

1. In the EZVIZ app, check the memory card status by tapping on the Storage Status in the Device Settings interface.
   

2. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event triggered video in the camera such as motion detection.

Troubleshooting

Q: “The device is offline.” or “The device is not registered.” prompts appear when adding the camera using the EZVIZ App.
A: 1. Make sure the network, which the camera is connected to, is working properly and the router’s DHCP is enabled.
2. Hold down the RESET button for 3s to reset the settings if you change the network parameters.
Q: The mobile phone cannot receive alarm prompts when the camera is online.
A: 1. Make sure the EZVIZ app is running on your mobile phone.
2. For Android OS mobile phone, make sure the app is running in the background; and for iOS mobile phones, enable the message push function in “Settings > Notification”.
Q: Does the camera support power via USB devices or a portable battery.
A: It’s advised to use the EZVIZ standard power adapter to provide a stable voltage supply.
For more information, please visit www.ezvizlife.com.

UD01186B

Documents / Resources

| ezviz Mini O Indoor Internet WiFi Camera [pdf] User Guide
Mini O Indoor Internet WiFi Camera, Mini O, Indoor Internet WiFi Camera, Internet WiFi Camera, WiFi Camera
---|---

References

• Manual-Hub.com - Free PDF manuals!
• EZVIZ - Creating Easy Smart Homes
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>