VANTRUE 2A7EH-P1 Portable Car Stereo Instruction Manual

VANTRUE 2A7EH-P1 Portable Car Stereo Instruction Manual

Hey, find us here:

www.vantrue.net/contact

facebook.com/vantrue.live

Introduction

General Introduction

1. Power Button
2. Screen
3. Loudspeaker
4. USB Port
5. Audio Output
6. Reset
7. Reverse Interface
8. Charging Port

Accessories

1. P1 Rear camera

2. P1 Rear camera cable (20ft)
   

3. Car Charger with Built-in Type-C Cable (141t)
   

4. Aux audio cable (3.3ft)
   

5. 3M adhesive sticker for P1 Host (1pc)

6. 3M adhesive sticker for rear camera (1pc)

7. Anti-skid pad (1pc)

Installation

Installing a memory card: Insert the sd card into slot, then you can play music and videos from the memory card on the screen.

Insert the applied car charger cable into the type c power port.

Flip the body over and place it in a suitable position on the center console (wipe this position clean)

Tear off the 3M adhesive protective film below the P1 body, attach the body base to the appropriate position on the center console. If the center console is not firmly attached, please lay the provided anti-skid pad on it, and then attach P1 to the anti-skid pad.

Lock the screen base clockwise after adjusting the screen to the appropriate height.

Insert the car charger into the cigarette lighter and power on the car to start P1.

Carefully store the car charger cable in the direction shown in the picture.

Installing the rear camera above the license plate.

The recommended installation and wiring method for the rear camera cable is as follows.

Product Function

1. Music interface: select play/pause music
2. Rear view preview: Click to quickly enter the rear view camera display interface
3. Function card: Click to enter with more function options
4. Return icon: Click to return to the previous page
5. Home icon: Click to enter the main page
6. Settings icon: Click to quickly enter the settings interface

More Product Function Setting

Click on the settings icon in the right corner of the screen to configure more settings.
Language: Click to enter optional other languages
WiFi: Click to enter the WIF! interface and connect to WIFI
Bluetooth: Click to enter the Bluetooth interface and connect to Bluetooth
AUX output: select on/off Date and time: Click to enter and adjust date & time manually Brightness: Click to enter and adjust screen brightness
Sound: Click to enter and adjust multimedia volume and call volume
Reverse video format: select PAL or NTSC Restore factory settings: Click to restore the machine to the factory state
Product information: Click to view product model and software version

*If there is a difference between the product function and the User Manual, it is due to product upgrade reasons. The actual version shall prevail. Thank you for your understandin

Specification

Warranty & Support

Warranty

The Vantrue Pilot 1 Wireless Carplay comes with a full 12 months warranty. If you register your product on our official site (www.vantrue.net/register), you can extend the warranty to 18 months.

Support

If you have any questions regarding the product, please do not hesitate to contact the customer service staff of your purchase channel, or drop us an email at support@vantrue.net. Queries are typically answered within 12-24 hours.

Your opinion matters

VANTRUE is firmly committed to keep improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at support@vantrue.net.

Thank You for Choosing Vantrue!

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits aredesigned to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation If thisequipment does cause harmful interference to radio or television reception , which can bedetermined by turning the equipment off and on, the user is encouraged totry to correcttheinterference byone or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet onn a circuit different from that to which the receiver isconnected.
• Consultthe dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation s subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.

www.vantrue.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>