CORNING DHRU-G2-17 HRU Digital High Power Amplifier Module Instructions

: June 17, 2024
: Corning

Table of Contents

Case
LED Functionality and Color Definition
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**CORNING DHRU-G2-17 HRU Digital High Power Amplifier Module Instructions

**

Case

2×2 MIMO Case

2TO1 2×2 MIMO Case

4TO1 2×2 MIMO Case

Refer to the table below for Everon™ 6000 Parameters.

Everon™ 6000 Parameters_Build 9_V1.

Release Version

SN	Unit	Version
1	RIU-TDD	23.4.1.11_Everon_6000_RIU_P2.V01.00.00.11
2	RIU-FDD	23.4.1.11_Everon_6000_RIU_P2.V02.00.00.05
3	DEU-25G	23.4.1.11_Everon_6000_DEU_P2.V01.00.03.87
4	DEU-10G	23.4.1.11_Everon_6000_DEU_P2.V02.00.03.
5	DCU	23.4.1.11_Everon_6000_DCU_P2.V01.00.03.83
6	dLRU-3.5	23.4.1.11_Everon_6000_dLRUH_P2.V01.00.04.92
7	dLRU-M	23.4.1.11_Everon_6000_dLRUM_P2.V02.00.04.06
8	dLRU-L	23.4.1.11_Everon_6000_dLRUL_P2.V02.00.04.03
9	dMRU-3.5	23.4.1.11_Everon_6000_dMRUH_P2.V01.00.03.51
10	dMRU-FDD	23.4.1.11_Everon_6000_dMRUF_P2.V02.00.00.46
11	dHRU-FDD	23.4.1.11_Everon_6000_dHRUF_P2.V01.00.01.68
12	System Version	23.4.1.11_Everon_6000_SYSTEM_P2.V01.04.03.38

LED Functionality and Color Definition

Optical LED definition

| | Green| Amber
---|---|---|---
( SYNC )| (LOS)
SFP Plug out| SFP Plug out| OFF| OFF
Optic Link Fail| 1. Optic cable disconnected| OFF| ON
| 2. SFP fail| OFF| ON
| 2.1 SFP fault| OFF| ON
| 2.2 SFP warning| OFF| ON
| 2.3 SFP alarm| OFF| ON
| 3. CPRI link down| OFF| ON
Optic Link OK| 1. Optic cable connected| ON| ON
| 2. SFP OK| ON| ON
| 3. CPRI link down| ON| ON
CPRI Link OK| 1. Optic cable connected| ON| OFF
| 2. SFP OK| ON| OFF
| 3. CPRI link up| ON| OFF

ALM/RUN/Power LED definition

LED	Description	Color
____ ALM	1. Alarm	Red
2. Device detect (Identify and is controlled from DCU)	Red Flash (1Hz, 10s)
3. No alarm	OFF
__ RUN	1. The system is up and running	Green Flash(1Hz)
2. Software or hardware failure	OFF
__ Power	1. Power on	Green
2. Power off	OFF

Caution message: The device is restricted use of unauthorized antennas, cables, and/or coupling devices which may cause device not conforming with ERP/EIRP limit and rf exposure requirement.
Warning : this device is license operation and not support home/personal use.

Warning! Each individual antenna used for this transmitter must be installed to provide a minimum separation distance as below or more from all persons and must not be co-located with any other antenna for meeting RF exposure requirements.
Warning! Antenna gain should not exceed as below.

Model No.	distance	antenna gain
dHRU-G2-6	5.7m	12.5dBi
dHRU-G2-7	7.7m	12.5dBi
dHRU-G2-85	5.3m	10dBi
dHRU-G2-19	5.4m	12.5dBi
dHRU-G2-17	6.6m	12.5dBi
dHRU-G2-23	3.8m	12.5dBi

WARNING ACCORDING TO PART 20
WARNING! This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including nalties in excess of $100,000 for each continuing violation.

Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC 28216 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2023 Corning Optical Communications. All rights reserved. LAN-3091-AEN / January 2023