Sharkoon REBEL C70G ATX PC Case Instruction Manual

Sharkoon REBEL C70G ATX PC Case

Specifications

General:

• Form Factor: ATX
• Expansion Slots: 7
• Interior Painting: Tempered Glass Black
• Graphics Card Holder: Yes
• Cable Management System: Yes
• Side Panel: Addressable RGB LED Fans / Strips
• Color Versions: Black
• Dimensions (L x W x H): 47.9 x 23.0 x 49.5 cm

RGB Compatibility

• Type: Addressable
• Ports: 8
• Manual Control: 22 Modes
• Mainboard Compatibility: MSI Mystic Light Sync, ASUSAura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync
• RGB Pinout: 5V-D-coded-G

Max Drive Bays

• 3.5: 3
• 2.5: 3

I/O

• Type-C (USB 3.2 Gen 2): 1
• USB 3.0 (Top): 2
• Audio (Top): 1 (TRRS)

Fan Configuration

• Front Panel: 3x 120 mm Addressable RGB LED PWM Fan (Pre-installed) or 3x 140 mm Fan (Optional)
• Rear Panel: 1x 120 mm Addressable RGB LED PWM Fan (Pre-installed)
• Top Panel: 3x 120 mm or 2x 140 mm Fan or Radiator (Optional)
• Side Panel: 4x 120 mm Fan* or Radiator (Optional)

Compatibility

• Mainboard: Mini-ITX, Micro-ATX, ATX
• Max. Length Graphics Card: 40.0 cm
• Max. Height CPU Cooler: 16.5 cm
• Max. Length PSU: 27.0 cm
• Max. Height Radiator incl. Fan (Top): 6.0 cm

Package Contents

• Rebel C70G RGB
• Accessory Set

1x 120 mm fan has same installation space for 1x HDD

Product Usage Instructions

Side Panel Assembly
To assemble the side panel, follow these steps:

1. Align the side panel with the case.
2. Slide the panel into the slots until it clicks into place.

Install 2.5 HDDs/SSDs
To install 2.5 HDDs/SSDs, follow these steps:

1. Locate the 2.5 HDD/SSD mounting area inside the case.
2. Attach the HDD/SSD to the mounting brackets using screws.
3. Secure the brackets with screws to the designated mounting points.

Install 3.5 HDDs
To install 3.5 HDDs, follow these steps:

1. Locate the 3.5 HDD mounting area inside the case.
2. Attach the HDD to the mounting brackets using screws.
3. Secure the brackets with screws to the designated mounting points.

Install PSU
To install the PSU, follow these steps:

1. Locate the PSU mounting area inside the case.
2. Place the PSU into the mounting area and align it with the screw holes.
3. Secure the PSU to the case using screws.

Detachable Dust Filter
To detach the dust filter, follow these steps:

1. Locate the dust filter on the designated area.
2. Gently pull on the filter to remove it from the case.

Detachable Dust Filter
To attach the dust filter, follow these steps:

1. Align the dust filter with the designated area on the case.
2. Press firmly to secure the filter in place.

Adjustable Graphics Card Holder
To adjust the graphics card holder, follow these steps:

1. Locate the adjustable graphics card holder.
2. Loosen the screws on the holder to adjust its position.
3. Tighten the screws once the desired position is achieved.

Install Fans
To install 120 mm fans, follow these steps:

1. Locate the fan mounting areas inside the case.
2. Attach the fans to the designated mounting points using screws.
3. Connect the fan cables to the corresponding fan headers on the motherboard.

Note: The same steps apply for installing 140 mm fans. Make sure to use the appropriate screws.

Install Fans
To install additional fans, follow these steps:

1. Locate the fan mounting areas inside the case.
2. Attach the fans to the designated mounting points using screws.
3. Connect the fan cables to the corresponding fan headers on the motherboard.

Install Fans
To install additional fans, follow these steps:

1. Locate the fan mounting areas inside the case.
2. Attach the fans to the designated mounting points using screws.
3. Connect the fan cables to the corresponding fan headers on the motherboard.

Install Radiator under Top Panel
To install a radiator under the top panel, follow these steps:

1. Remove the top panel of the case.
2. Attach the radiator to the designated mounting points using screws.
3. Secure the radiator in place by tightening the screws.

Note: The same steps apply for installing 140 mm radiators.Make sure to use the appropriate screws.

Install Radiator on Side Panel
To install a radiator on the side panel, follow these steps:

1. Remove the side panel of the case.
2. Attach the radiator to the designated mounting points using screws.
3. Secure the radiator in place by tightening the screws.

Note: The same steps apply for installing 240 mm and 360 mm radiators. Make sure to use the appropriate screws.

Optional Vertical Graphics Card Kit
If you need to install a vertical graphics card, you can purchase the optional Vertical Graphics Card Kit. Please check with your local dealer for availability and purchase.

Control Addressable RGB through Mainboard
To control addressable RGB through the mainboard, follow these steps:

1. Connect the SATA power cable to the addressable RGB LED fans/strips.
2. Connect the RESET SW cable to the addressable RGB pin header on the mainboard.
3. Use the mainboard’s software or firmware to control the addressable RGB lighting.

Manually Control Addressable RGB
To manually control addressable RGB, follow these steps:

Press reset switch for 2 seconds to turn off the LED lights.
When the LED lights are off, press reset switch to turn on the LED lights.

1. Connect the SATA power cable to the addressable RGB LED fans/strips.
2. Connect the RESET SW cable to the addressable RGB pin header on the mainboard.
3. Press the reset switch to cycle through different RGB modes.
4. Hold the reset switch for 2 seconds to turn off the LED lights.Press the reset switch again to turn on the LED lights.

Note

Note: Disposal of your old products

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product

Legal Disclaimer
For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability.
All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected.
As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting,reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.

Disposal of your old products
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product,it means the product is covered by the European Directive 2012/19/EU.
Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.

Sharkoon Technologies GmbH
Grüninger Weg 48
35415 Pohlheim
Germany
© Sharkoon Technologies 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>