Sharkoon Rebel C50 ATX PC Case User Manual

: October 30, 2023
: sharkoon

Table of Contents

Specifications
Install Fans
Install HDDs/SSDs
Install PSU
Detachable Dust Filters
Install Radiator on Side Panel
Install Radiator under Top Panel
Optional Vertical Graphics Card Kit
Extra Graphics Card Holder
Control Addressable RGB through Mainboard
Manually Control Addressable RGB
Addressable RGB LED Fans / Strips
Disposal of your old products
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sharkoon Rebel C50 ATX PC Case User Manual

Specifications

General:

Form Factor: ATX
Expansion Slots: 7
Interior Painting:
Cable Management System:
Side Panel: Rebel C50 RGB: Tempered Glass Rebel C50: Metal
Dimensions (L x W x H) : 46.0 x 23.0 x 49.5 cm

RGB Compatibility (Rebel C50 RGB):

Type: Addressable
Ports: 8
Manual Control: 20 Modes
RGB Pinout: 5V-D-coded-G

I/O:

Type-C (USB 3.2 Gen 2) (Top): 1
USB 3.0 (Top): 2
Audio (Top): (TRRS)

Max. Drive Bays:

3.5″: 3
2.5″: 3

Fan Configuration:

Front Panel: Rebel C50 RGB: 3x 120 mm Addressable RGB LED PWM Fan (Pre-Installed) or 3x 140 mm Fan (Optional) Rebel C50: 1x 120 mm PWM Fan (Pre-Installed) + 2x 120 mm Fan (Optional) or 3x 140 mm Fan (Optional)
Rear Panel: Rebel C50 RGB:1x 120 mm Addressable RGB LED PWM Fan (Pre-Installed) Rebel C50: 1x 120 mm PWM Fan (Pre-Installed)
Top Panel: 3x 120 mm or 2x 140 mm Fan (Optional) or Radiator (Optional)
Side Panel: *4x 120 mm Fan (Optional) or Radiator (Optional)

Compatibility:

Mainboard: Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Cards: 40.0 cm
Max. Height CPU Cooler:
Rebel C50 RGB: 16.5 cm
Rebel C50: 16.8 cm
Max. Length PSU: 27.0 cm
Height of Radiator incl. Fan Top: 6.0 cm

Package Contents:

Rebel C50/Rebel C50 RGB, Accessory Set, Manual
*1x 120 mm fan has same installation space for 1x HDD

Install Fans

Install HDDs/SSDs

Install PSU

Detachable Dust Filters

Install Radiator on Side Panel

Install Radiator under Top Panel

Optional Vertical Graphics Card Kit

Please check with your local dealer to purchase this kit, if needed.

Extra Graphics Card Holder

Control Addressable RGB through Mainboard

Manually Control Addressable RGB

Manually Control

Addressable RGB LED Fans / Strips

Addressable RGB

Press reset switch for 2 seconds to switch off the LED lights. When the LED lights are off, press reset switch to switch on the LED lights.

Legal Disclaimer
For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.

Disposal of your old products

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.

QR Code

Follow us on
Symbols