MAGICSHINE Bike Lights Control App User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE Bike Lights Control App User Manual
INTRODUCTION
Magicshine App is an app that connects to compatible devices and can be used to configure light settings, turn on/off light sensor/vibration sensor, check the remaining battery level, etc.
Compatible Devices:
ALLTY 1500S, MONTEER 12000, RAY 1600B, RAY 2600B, EVO 1700, etc.
Device Pairing Name:
“M0” means remote control; “M1” means 1 LED; “M2” means 2 LEDs; “M3” means 3
LEDs; “M4” means 4 LEDs.
“B” for bicycle light; “H” for headlight; “F” for flashlight; “C” for remote
controller; “T” for tail light; “E” for accessory.
“0” means no smart sensors; “1” means light sensor; “2” means vibration
sensor; “3” means light sensor and vibration sensor.
For example:
“M1-B3” means a bicycle light with 1 LED, light sensor and vibration sensor,
such as ALLTY 1500S; “M2-B3” means a bicycle light with 2 LEDs, light sensor
and vibration sensor, such as RAY 1600B; “M2-B0” means a bicycle light with 2
LEDs, no light sensor, no vibration sensor, such as EVO 1700.
Before Use
A smartphone and compatible device are required to use the Magicshine App.
DOWNLOAD THE MAGICSHINE APP
Method 1: Scan the QR code to download the App
[https://shop16628851.youzan.com/v2/feature/vJib9uiT65?common%2Furl%2Fcreate=&kdt_id=16436683&scan=3&from=kdt&shopAutoEnter=1](https://shop16628851.youzan.com/v2/feature/vJib9uiT65?common%2Furl%2Fcreate=&kdt_id=16436683&scan=3&from=kdt&shopAutoEnter=1)iOS and Android users click “Magicshine” to download the App. iOS users can also click “APP Store”, and Android users click “Google” on the bottom left to download the App to a smartphone.
Method 2：Search for “Magicshine” to download the App
For iOS users, search for “Magicshine” in the “APP Store” and for Android users, search for “Magicshine” in “Google Play” to download the App.
#APP PERMISSION SETTINGS & REGISTRATION
Before first use, iOS users need to obtain “WLAN & Cellular”, “Bluetooth”, and
“App Tracking” permissions, and register and log in via “Apple ID”,
“Facebook”, “Google” or “Mailbox”.
Android users need to obtain location information and device search permissions, and can use the App without registration.
*Downloading and using the App incurs communication fees. A Wi-Fi connection is recommended.
CONNECT WITH A DEVICE
*Connect the device to a power source, turn on the Bluetooth of your smartphone, and place it within 10 meters.
Click “Add New Devices” and find the corresponding pairing name (see device manual, such as M2-B0). Click “Add”, and click “Connect the device”.
Pairing is successful. Go to the “Device Settings” interface.
LIGHT CUSTOMIZATION
Customize light settings, add new modes, and adjust brightness levels via the Magicshine App. (Take EVO 1700 as an example)
Click “Add” at the bottom to add a new custom mode. Mode 1 and Mode 2 support up to 20 custom modes.
#RESTORE FACTORY SETTINGS
After setting custom modes in the App, the device will light up in the custom
mode. To restore factory settings, please delete all custom modes in the App.
The runtime of the custom modes does not apply to the runtime table in the
device manual. To restore default runtime, please delete all custom modes in
the App.
PROFILE MANAGEMENT
Open the menu bar and click on the “Profile” option.
Click “Add” and enter a profile name, then click “done” to save.
Click “Profile_1” on the top left, and click “Start” to select the corresponding profile, then click “Add” to customize lighting modes, according to the instructions “3. Light Customization”.
NETWORK CONNECTION
The network connection function is only available on iOS platform.
Network connection requires at least two Magicshine devices. Before networking, please make sure the required devices are turned on.
When the device is successfully connected to the App, click “Network
Connection” on the menu bar, select the devices to be connected, and then
click “Adjust” to enter the device settings interface.
After the network connection is successful, the devices in the same network
will light up with the same lighting mode and brightness.
If the main device is turned off (for devices successfully connected to the
App, see “My Devices” interface), the network connection function will be
cancelled.
Other devices can exit the current network by pressing the power button for 5
seconds.
Click “Close” to disable the network connection function.
FIRMWARE UPGRADE
When the device is successfully connected to the App, click “Version Upgrade” on the menu bar.
Click “Firmware Update” and click “Sure” to upgrade the App to the latest version
*Do not operate your phone while the App is being upgraded. When the upgrade is completed, reconnect the device and the App.
ACCOUNT SETUP
Click the picture to enter the “User info” interface, and click the corresponding column to change your personal information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>