Godox MLP19K Spotlight Projection Attachment Kit Instruction Manual
- June 17, 2024
- Godox
Table of Contents
Godox MLP19K Spotlight Projection Attachment Kit
Foreword
Thank you for purchasing!
- Godox has dropped a new range of projection attachments with Godox-mount. There are 3 models in total which are MLP1 9K, MLP26K and MLP36K. They are equipped with 19″, 26″ and 36° detachable lenses respectively.
- The MLP series projection attachment is a portable light control tool. When paired with Godox-mount LED video light it can function as a spotlight follow spotlight, or projection light, offering users a variety of distinctive lighting effects such as spotlighting, follow spotlighting, beam cutting, optical zoom, beam projection, and beam shaping.
Parts
- Godox Mount
- Shutter Blade Slot
- Iris Diaphragm Slot
- Gobo Holder Slot
- Focusing Dial
- Color Effects Set Retainer
- Stand Adapter
- Locking Knob
Installation and Application
-
Mounting the Projection Attachment to a Tripod
-
Insert the stand adapter into the top of the tripod, adjust to the desired angle, and tighten the locking knob to secure it in place.
-
Note: Tripod is sold separately.
-
Installation of LED Light (Take ML60 as an example)
Insert the G-mount into the buckle of the projection attachment then rotate right to tighten it. -
Disassembly of LED Light (Take ML60 as an example)
Pull the ML60 pusher backward, then turn it to the left to release it. -
Installation of Gobo
Place the Gobo in the Gobo holder, then insert the Gobo holder into the slot, pressing down slightly until it is fully inserted.
Beam Uniformity of Different Lens
The video light used is ML60 (sold separately), and the measured spot diameters for the three lenses are 1 meter, with a color temperature of 5600K.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has expired its warranty period;
- Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent acid, base, flooding and damp environments, etc.
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
- The original identifying information of product or accessory is modified, alternated, or removed;
- No valid warranty card;
- Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
- Breakage or damage caused by force majeure or accident
- Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Godox After-sale Service Call 0755-29609320-8062
Packing List
Optional Accessories
- Projection Lens 19° MLP-01
- Projection Lens 26° MLP-02
- Projection Lens 36° MLP-03
- Iris Diaphragm MLP-ID
Technical Data
Photometric Data
MLP projection attachments, photogenic data using different lenses (withML60)
The above tests were all conducted with the lamp at 100% brightness and the
projection lens set to spotlight mode. Video light ML60 is available
separately.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you
Note: This form shall be sealed by the seller.
-
Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope. -
Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day (purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product. -
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
WeChat ****
Official Account
- GODOX Photo Equipment Co., Ltd.
- Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an
- District, Shenzhen 518103, China
- Tel: +86-755-29609320(8062)
- Fax: +86-755-25723423
- E-mail: [email protected]
- www.godox.com
- Made in China 705-MLP000-01
Documents / Resources
|
Godox MLP19K Spotlight Projection Attachment
Kit
[pdf] Instruction Manual
MLP19K Spotlight Projection Attachment Ki, MLP19K, Spotlight Projection
Attachment Ki, Projection Attachment Ki, Attachment Kit
---|---