Godox LDX50 BI Color Panel Light Instruction Manual

Godox LDX50 BI Color Panel Light

Product Information

Specifications

• Brand: Unknown
• Model: Unknown
• Color: Unknown
• Dimensions: Unknown
• Weight: Unknown

Product Usage Instructions

Unboxing and Setup
To begin using the product, follow these steps:

1. Open the packaging box and carefully remove all contents.
2. Check if all the listed components are included.
3. Place the product on a stable surface.
4. Connect any necessary cables to their respective ports.
5. Ensure the product is connected to a power source.

Powering On and Off
To turn on the product, follow these steps:

1. Locate the power button on the product.
2. Press and hold the power button until the device powers on.

To turn off the product, follow these steps:

1. Locate the power button on the product.
2. Press and hold the power button until the device powers off.

Basic Controls
The product includes basic controls for easy operation. The specific controls may vary depending on the model and brand. Please refer to the user manual for detailed information on the controls and their functions.

Maintenance and Cleaning
To ensure optimal performance and longevity of the product, follow these maintenance and cleaning guidelines:

• Regularly clean the product using a soft, dry cloth.
• Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
• Keep the product away from excessive heat, moisture, and direct sunlight.
• Do not disassemble or modify the product without proper knowledge or authorization.

Troubleshooting
If you encounter any issues with the product, try the following troubleshooting steps:

• Check all connections to ensure they are secure.
• Restart the product by turning it off and on again.
• Refer to the user manual for specific troubleshooting tips and solutions.
• If the problem persists, contact customer support for further assistance.

FAQ (Frequently Asked Questions)

1. Q: How can I obtain a copy of the user manual?
   A: The user manual can be downloaded from the official website at <https ://manual-hub.com/>.

2. Q: Where can I find the declaration of conformity for this product?
   A: The declaration of conformity can be found on the official website at https://www.godox.com/eu-declaration-of-conformity/.

3. Q: What should I do if the product is not functioning properly?
   A: If you are experiencing issues with the product, please refer to the troubleshooting section in the user manual. If the problem persists, contact customer support for further assistance.

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals, Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and attentions.
2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.
3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
7. This product is only suitable for use in -2o•c to +40’C operating environment and normal humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.
9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.
12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet.
13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.
14. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.
15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.
19. Please take off the protective cover before using.
20. This product complies with RDHS, CE and FCC certification, please refer to the relevant national standards for use and operation.
21. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.
22. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.
23. Some products are battery powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or modify this product or battery. Do not heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together.
24. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty.
25. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance.
26. Machine failures caused by non-standard operation are not covered by the warranty.

keep these instructions!

Foreword
Thank you for purchasing
Bi-color Panel Light LDX50Bi features: adjustable color temperature, 11 FX modes, Bluetooth APP/ 2.4G wireless/light body control, making it quite suitable for advertisement shooting, wedding portraits, interviews, film and television production, micro-film shooting etc.

Main Features

• Wide CCT range freely adjustable from 2800K to 6500K.
• Two ways of power supply: DC power supply or NPFN-mount battery power supply.
• Three ways of controlling: Bluetooth APP, 2.4G remote control and light body.
• Detachable diffuser provides more lighting possibilities.
• 71 FX modes: flash, lightning, cloudy, broken bulb, TY, candle, fire, firework, explosion, welding and SOS.
• 7 O preset effects can be saved gives convenience.
• 360° rotatable U-type bracket offers flexibility.

Note: NPFN-mount battery is sold separately. A connector cable (sold separately) is needed when using v-mount battery.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.
• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• Do not use the flash unit in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warnings.
• Do not leave or store the product if the ambient temperature reads over 40’C.
• Do not use the product in the presence of flammable gas. In certain circumstance,please pay attention to the relevant warnings.

Name of Parts

Light Body

1. Detachable Diffuser

2. Disassembly Pusher

3. U-type Bracket
   Adjustment Dial

4. NPF Battery Slot

5. Battery Detachment Button

6. Display

7. CCT/FN Dial

8. DC Input Port

9. MODE Button

10. Wireless Button

11. Lock Button

12. PRESET Button

13. DIM Dial

14. Power Switch Button

15. Sleeve

16. Sleeve Fixing Knob

17. U-type Bracket

18. Installation Slide

What’s Inside

Separately Sold Accessories
Remote Control RC-A611 D-TAP to DC Male Connector Cable Barndoor

Power Supply

3 .V-mount battery power supply
Note: D-TAP to DC Male Connector Cable and v-mount battery are sold separately.

Installation of the Diffuser
Push the disassembly pusher in the opposite direction of the light beads, insert in the diffuser along the slides, and then push the disassembly pusher in the direction of the light beads.

Installation of the Barndoor (The bamdaor is said separately)
Push the disassembly pusher in the opposite direction of the light beads, insert in the closed barndoor along the slides, and then push the disassembly pusher in the direction of the light beads.

Installation of the Diffuser and the Barndoor
(The bamdoor is sold separately)
Install the diffuser onto the barndoor first, then push the disassembly pusher in the opposite direction of the light beads, insert in the barndoor with diffuser along the slides, and then push the disassembly pusher in the direction of the light beads.

Power Switch

1. Toggle the power switch button to< > after inserted two NPF batteries or connected to v-mount battery to turn on the device.
2. Toggle the power switch button to< > after connected to AC power supply with the adapter to turn on the device.
3. Toggle the power switch button to< > in either power supplies can turn off the device.

Brightness Adjustment
When the light is in CCT /FX mode, turn the DIM dial can adjust the brightness from 0% to l 00%. Turn left to decrease the brightness by l unit while turn right to increase the brightness by l unit, with quick adjustment available by turning quickly.

Mode Selection

Short press the MODE button to switch between CCT mode and FX mode.

1. CCT Mode
   Turn the CCT /FN dial left once can decrease the CCT value by l00K, while turn right once can increase the CCT value by l00K, with quick adjustment available and adjustable range from 2800K to 6500K. Short press the CCT /FN dial can switch among 2800K/3200K/4300K/5600K/6500K.

2. FX Mode
   Turn the CCT/FN dial in FX setting interface to select effect type (11 ). Short press the CCT /FN dial can adjust the effect level.

FX Table

2.4G Wireless Setting

Short press the wireless button to enter 2.4G wireless setting, turn the CCT /FN dial to select GR/CH/ID/Bluetooth.
GR: Short press the CCT/FN dial and the group frame icon blinks, then turn the CCT/FN dial to select among 16 groups (A-F/0-9).

CH: Short press the CCT/FN dial and the CH icon blinks, then turn the CCT /FN dial to select among 32 channels (1-32).

ID: Short press the CCT/FN dial and the ID icon blinks, then turn the CCT/FN dial to select among OFF/99 IDs (1-99).

Bluetooth reset: Long press the CCT/FN dial until Bluetooth icon blinks means Bluetooth is resetting, it will stop blinking after successfully reset

Bluetooth MAC code: on the right corner of the Bluetooth interface, for the purpose of pairing.
Note: 2.4G wireless and Bluetooth are on by default.

• The GR, CH, and ID of the remote control RC-A611 (optional) should be the same as those of light body.

Godox light”APP
Scan the QR code to download “Godox Light” APP (both Android and iOS systems are available).
Note: the APP can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile device, the light shall be reset before the normal usage of APP. The APP should be V3.0 or above.

Lock Function
Short press the lock button, the < > icon shows on the display means it’s locked. Short press the lock button again, the < > icon shows on the display means it’s unlocked.
Note: The lock function only constricts the controlling panel, the 2.4G wireless control or APP can still control the light body since the wireless function is not constricted.

Preset Function
Short press the preset button to enter preset setting, turn the CCT /FN dial to select among Pl to PlO groups, then short press CCT /FN dial to enter preset group setting. Turn the CCT /FN dial to select< > save/< >apply, short press the CCT/FN dial to confirm. If you select < >apply and confirm, it will go to the preset effect interface automatically.

Save: save the current effect
Apply. apply the preset effect
Note: If a certain group has not been preset any effect, this < >apply option will not be displayed .

llluminance Data

Technical Data

Specifications and data may subject to changes without notice.

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Warning
Operating frequency: 2412.99MHz – 2464.49MHz(2.4G only receive)/2402MHz – 2480MHz(BT)
Maximum EIRP Power.0.6dBm

Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of Doc, Please click this web link:
https://www.godox.com/eu-declaration-of-conformity/
The device complies with RF specifications when the device used at 0mm from your body.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller.

Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day (purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

1. The product or accessory has expired its warranty period;
2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
4. The original identifying information of product or accessory is modified, alternated, or removed;
5. No valid warranty card;
6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
7. Breakage or damage caused by force majeure or accident;
8. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type| Name| Maintenance Period(month)| Warranty Service Type
---|---|---|---
Parts| Circuit board| 12| Customer sends the product to designated site
Battery| | Customer sends the product to designated site
Electrical parts e.g. battery charger, etc| 12| Customer sends the product to designated site
Other Items| Lamp body, lamp cover, locking device, package, etc| NO| Without warranty

GodoxAfter-sale Service Call 0755-29609320-8062

Wechat
Official Account

GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’ an District, Shenzhen 518703, China Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
Website: www.godox.com
Made in China I 705-LDX50B-Ol

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>