TVCMALL AK09 3 In 1 Foldable Magnetic Wireless Charger Instruction Manual

TVCMALL AK09 3 In 1 Foldable Magnetic Wireless Charger

Product Information

Specifications

• Input: 5.0V 2.0A
• Output: 9.0V 3A
• Frequency: 115 – 205 KHz
• Efficiency: 80%
• Product Size: 61mm x 90mm x 22.6mm

Product Introduction

Thanks for choosing our 3 in 1 Foldable Magnetic Wireless Charger! This product is a multifunctional and foldable magnetic wireless charger, designed to wirelessly charge mobile phones, earbuds, and watches at the same time. It is a convenient and portable 3-in-1 wireless charger.

Using Instructions

Folding Form

In the folded state, after connecting the charger to the power supply, the top of the charger can charge the mobile phone (or earbuds with a wireless charging case) flatly. The foldable design makes it small and compact, perfect for home, office, and travel use.

Unfolded Stand Form

To use the charger in the unfolded stand form, follow these steps:

1. Unfold the charger as shown in the figure.
2. Connect the charger to the power supply.
3. The charger will enter into the standby state, indicated by a blue light.
4. Place your phone in the magnetic charging position, as marked in the figure.
5. Adjust the angle of the charger as needed.
6. Unfold the watch charger to the fixed position.

Foreign Object Detection Function

The charger is equipped with a foreign object detection function. If a metal foreign object is detected in the wireless charging area or the mobile phone is not placed correctly, the charger will activate the FOD warning function. In this case, the indicator will flash continuously with a blue light. To restore normal charging, ensure that the phone is placed correctly or remove any metal foreign objects.

Note

• Do not hit, throw, or expose this product to fire or water to avoid short-circuiting.
• Avoid placing this product in high or low temperature or humid environments (temperature range 10°C to +40°C).
• Keep the wireless charger at least 20cm away from implanted medical equipment (pacemaker, implantable cochlea, etc.).

FAQ

• Q: Can this charger charge multiple devices simultaneously?
  A: Yes, this charger can wirelessly charge mobile phones, earbuds with a wireless charging case, and watches at the same time.

• Q: How do I know if the charger is working correctly?
  A: When the charger is connected to the power supply, it will enter into the standby state with a blue indicator light. If there are any issues, refer to the user manual for troubleshooting steps.

Product Introduction

Thanks for choosing us!
This product is a multifunctional and foldable magnetic wireless charger, which can wirelessly charge mobile phones, earbuds, and watches at the same time. It is a convenient and portable 3-in-1 wireless charger. Please read the manual carefully before using the product, and keep it properly for checking

Using Instructions

This product has two forms: folding form and unfolded stand form.

1. Folding form: In the folded state, after connecting to the power supply, the top of the charger can charge the mobile phone (or earbuds with a wireless charging case) flatly. The foldable 3 in 1 wireless charger is small and compact, and it is easy to carry. It is a good charging companion for home, office, and travel.
2. Unfolded stand form: unfold the charger as shown in the figure (the charging position is marked in the figure), after connecting to the power supply, the charger enters into the standby state, and the indicator is shown as blue.

Three Device Charging Models

The angle of the phone charging position can be adjusted arbitrarily, and the user can self-adjust according to comfort. After placing the phone(with magnetic adsorption function) on the phone (magnetic) charging position, the phone will automatically attract and start charging, and the indicator is shown as green and keeps on.(As shown figure 1)

• Watch charging position: As shown in figure2, first unfold the watch charger to a fixed position, then place the Watch in the charging position.(As shown Figure 2)
• After placing the earbuds(with wireless charging case) on the earbuds charging position, the earbuds start to charge, the indicator is shown as green, and keep on.(As shown in Figure 3)

Foreign Object Detection Function
When a wireless charging area senses a metal foreign object or the position of the mobile phone is misplaced, it will start the FOD warning function, and the indicator will show as blue light flashes continuously; after placing the phone in the correct position or removing the metal foreign objects, the normal charging state can be restored.

Product Specification

• Input 5.0V 2.0A 9.0V 3A
• Output 15W(MAX)
• Frequency 115-205KHz
• Efficiency 80%
• Product Size 61mm90mm22.6mm

Note

1. Do not hit this product, throw it into fire or water to avoid short
2. Do not place this product in a high or low temperature, or humid environment(temperature range -10℃— +40℃)
3. Please keep the wireless charger away from implanted medical equipment (pacemaker, implantable cochlea, etc.) at least 20cm away to avoid potential interference to medical equipment.
4. Please keep the product away from children reachment to avoid accidents.
5. Please use the standard accessories of this product. If this product is damaged due to the use of non-standard accessories, it is not covered by the warranty.
6. Do not disassemble the product without permission. If the product is damaged, it will not be covered by the warranty

Compliance FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment must be installed and operated by provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure

MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>