TVCMALL YYK-Q71 Clip On Wireless Headset User Manual

TVCMALL YYK-Q71 Clip On Wireless Headset

Product specifications

• Wireless Version: V5.3
• Talk time: about 6 hours
• Music playing: about 6 hours
• Standby time: 80 hours
• Communication distance: >10m
• Charging time of headset: about 1 hour
• Headset battery capacity: 30MAH
• Battery capacity of charging chamber: 300MAH
• Frequency characteristic: 2.40ghz-2.48-ghz
• Support agreement: A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3

Multiple use key

• Pause/play: Briefly press the MFB key
• Last song: Press the Lear MFB key twice when playing the song
• Next song: Press the Rear MFB key twice when playing the song
• Sound plus: Press and hold the right ear MFB key
• Sound reduction: Press and hold the MB key on the left ear
• Answer the call: Click the MFB key when calling
• Hang up the phone: Click the MFB key during the call
• Call rejection: Double-click the MFB key when calling
• Cancel call: Click the MFB key when dialing
• Call Siri: Press the left or right MB key 3 times in the state of not playing songs
• Cancel Siri: Press the left or right MB key once when the MFB key is not playing songs

Power on/off

1. When the headset is taken out of the charging chamber for the first time the headset will turn on automatically. Put the headset back in the charging chamber and it will start charging and automatically shut down.
2. When the headset is not in use, put it back into the charging chamber and turn it off automatically.

How to reset

When the headset is in pairing status, press the MFB key 4 times. Put the headset in The headset will automatically shut down and start charging.

After removing the headset
It will start automatically and the reset will be completed.

How to pair

1. Take out the charging chamber to start the machine
2. Automatic headset pairing
3. Open the settings of the mobile phone/tablet
   • Bluetooth
   • Open Bluetooth
   • Search
   • VYK-Q71
   • pairing/connecting
   • playing music.

Computer/laptop pairing method

• Turn on the PC settings
• Devices
• Wireless and other devices
• Turn on Wireless
• Add WirelessthOr other devices
• Search Wireless device VYK-071-pair/connect
• Play Music

Note:
If the computer does not have Wireless, please insert the Wireless adapter and download the Wireless driver then it can be used normally.

How to charge the headset

1. Put the headset into the charging compartment, and the headset will automatically shut down and start charging. The display lamp of the charging compartment lights up, indicating that the charging compartment is charging the headset.
2. The red light is always on when charging the headset, and the blue light is always on when charging the headset. The charging chamber is off.

Charge the charging chamber

Please use the mobile phone adapter to charge the charging chamber. You can use the computer TYPE-C cable or other chargers with a Type-C interface.

Safety precautions

For high-quality earphones, please refer to the following instructions to prolong the service life:

1. Please keep away from high temperatures, high humidity, and corrosive environments.
2. Please prevent the product from being hit, dropped, bent, soaked, etc.
3. Please do not remove the headset or charging stand.
4. Please do not allow (the product to be overcharged all the time, so as lo reduce the service life of the product.
5. If it causes any discomfort or pain, please stop using this product.
6. Use a DC 5V-1A adapter certified by a regulated manufacturer.

Repeated charging and discharging of the headset will cause the battery performance to decrease over time, which will affect all rechargeable Electronic products are normal.

There are

1. Two Wireless headsets
2. One charging base
3. One Type-c charging line
4. 1 manual

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

The devices have been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>