TVCMALL K01T Creative Clock Wireless Charger with Night Light User Manual

K01T Creative Clock Wireless Charger with Night Light
User Manual

K01T Creative Clock Wireless Charger with Night Light

Thanks for choosing this phone wireless charger. In order to use it in a safe and convenient way, please read the manual carefully to ensure your better using experience.

Product Description

• This product has fashion, creative and simply design. It can be used in family, bedroom and office area

Main Features of the Clock

• LED time display
• Display time, date, alarm
• Brightness automatic dimming function/manual dimming function
• 3 buttons MODE UP DOWN
• Date: January 1, 2000 ~ December 31, 2099 Boot default January 1, 2020
• LED screen automatically time, date
• A1, A2, A3 three alarm clocks
• Power supply mode: memory battery CR2032, working power supply is DC5V DC power supply

LED full display renderings

Clock Operations Instructions

Uses 3 buttons: MODE UP DOWN

Product OverviewKey Function Diagram

MODE (Button)

• Short press ****Key check time – date – alarm (A1-A2-A3)
• Long press ****key for 2 seconds to enter the setting mode.
• Press and hold the ****button in time mode to set the 12/24 hour system and time.
• Press and hold the ****button in date mode to set the date
• Press and hold the ****button in alarm mode to set the alarm time.

UP (Button)

• Short press ****to set DP1 -DP2 -DP3 mode
• DP! for time, date cycle display
• DP2 and DP3 are fixed time display with date. No cyclic display
• Short press ****to turn on and off the alarm in alarm mode (e.g. turn onthe alarm as ON: Al, turn off as — : Al).
• When setting the clock or alarm, short press the ****button → the number increases

DOWN (Button)

• When setting the clock or alarm, short press the ****button → Number decrease
• Long press the ****key to set the time display brightness, in order L0-L1-L2-L3 (L0 is the darkest, L3 is the brightest)

Product Function

• Touch on light
• Product wireless fast charging function
• Night light function, (as shown in the picture)

Applicable equipment

• The product supports all QI-compliant cell phone receiving devices supporting 5W-7.5W-10W power wireless fast charging

Instructions for use

• Connect the device with a QC protocol compliant adapter using the original charging cable (as shown below)
• The device is powered on, the product indicator blue and white lights flashing each other, the white light is always on, indicating that the product can be used normally
• Put the charging device into the charging area, the white indicator light turns from white to blue, while the phone receives the charging signal, indicating that the wireless charging function is working properly, and the device turns back to the white indicator light after itis fully charged
• Night light bright mode, touch the plating switch to start the light
  A. Touch the first gear brightness is 100%
  B. Touch the second gear brightness of 50%
  C. Touch the third gear brightness of 10%
  D. Touch the fourth gear to turn off the lights, and so on cycle; (as shown in the figure below)

Touch switch indication

Product parameters

• Charging voltage: DC 5V ===2A 9V===1.67A
• Power: 5W/7.5W/10W
• Charge conversion rate: 75%
• Power energized port: Type-C
• Charging distance: Charging distance ≤8 mm

Product Accessories

• 1pcs 100cm USB Cable
• 1pcs User Manual
• 1pcs Package box

Cautions

• Keep this charging device away from water or other liquids
• If you need to clean the charging device, please disconnect the power
• Product working environment temperature range: -20 ~ 45°C

Warning:
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.
This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.

V1.1

Documents / Resources

| TVCMALL K01T Creative Clock Wireless Charger with Night Light [pdf] User Manual
2BAUC-K01T, 2BAUCK01T, k01t, K01T Creative Clock Wireless Charger with Night Light, K01T, K01T Clock Wireless Charger, Clock Wireless Charger, K01T Wireless Charger, Wireless Charger, Charger, Creative Clock, Creative Clock Wireless Charger, Creative Clock Wireless Charger with Night Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>